- RS Stock No.:
- 323-038
- Mfr. Part No.:
- 010032 DILEM-10(240V50HZ)
- Brand:
- Eaton
- RS Stock No.:
- 323-038
- Mfr. Part No.:
- 010032 DILEM-10(240V50HZ)
- Brand:
- Eaton
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
Eaton DILEM-10(240V50HZ) Contactor
When the job calls for sure-fire switching, you can count on this contactor from Eaton. Its a versatile all-rounder suitable for both non-inductive and inductive loads as well as motor starting and control applications. You get quick switchover times for opening (8 to 18ms) and closing (14 to 21ms), making it a practical choice that delivers fast and secure actuation. Thanks to its short-circuit protection and impulse withstand voltage up to 6kV, you can trust you're shielded against current and overvoltage faults, too.
Features & Benefits
• 3 pole
• Conforms to IEC/EN 60947, VDE 0660, CSA, UL standards
• The ambient operating temperature when open is - 25 - 50°C
• The ambient operating temperature when enclosed is - 25 - 40°C
• Weighs just 0.2kg
• Forms part of the DILEM contactor range
• Utilisation category - AC-1: Non-inductive or slightly inductive loads, resistance furnaces, NAC-3: Normal AC induction motors: starting, switch off during running and AC-4: Normal AC induction motors: starting, plugging, reversing, inching
• Also suitable for motors with efficiency class IE3
• Screw terminals
• With auxiliary contact
• For use with the DILEM and DILEEM range
• Has an actuating voltage of 240 V 50 Hz
• Conforms to IEC/EN 60947, VDE 0660, CSA, UL standards
• The ambient operating temperature when open is - 25 - 50°C
• The ambient operating temperature when enclosed is - 25 - 40°C
• Weighs just 0.2kg
• Forms part of the DILEM contactor range
• Utilisation category - AC-1: Non-inductive or slightly inductive loads, resistance furnaces, NAC-3: Normal AC induction motors: starting, switch off during running and AC-4: Normal AC induction motors: starting, plugging, reversing, inching
• Also suitable for motors with efficiency class IE3
• Screw terminals
• With auxiliary contact
• For use with the DILEM and DILEEM range
• Has an actuating voltage of 240 V 50 Hz
What size wires can I use this contactor with?
This product suits any wire size from 0.75 to 2.5mm² (18 to 14AWG), so it's a versatile choice.
Specifications
Attribute | Value |
---|---|
Coil Voltage | 240 V ac |
Number of Poles | 3 |
Contact Voltage Rating | 400 V ac |
Contact Current Rating | 9 A |
Range | xStart |
Power Rating | 4 kW |
Series | DILEM |
Normal State Configuration | 3NO |
Auxiliary Contact Configuration | 1NO |
Number Of Auxiliary Contacts | 1 |
Terminal Type | Screw |
Width | 45mm |
Length | 58mm |
Depth | 52mm |
Maximum Operating Temperature | +50°C |
Control Voltage | 240 V |
Minimum Operating Temperature | -25°C |
Pole and Throw Configuration | 3P |
Mounting Style | DIN Rail Mount |