Cable Trays & Baskets

Cable trays and baskets provide a safe open solution for routing cables and wires. Cable trays can be mounted onto a wall or suspended from a ceiling to provide a track that allows cables and wires to be routed around a building in an easily maintainable manner. Often made of galvanised or stainless steel cable trays and baskets not only provide a perfect cable management solution but also look aesthetically pleasing in any environment.

...
Read more Read less

Filters

Viewing 1 - 7 of 7 products
Results per page
Description Price Tray/Basket Type Length Width Depth Material Series
RS Stock No. 798-9427
Mfr. Part No.SSL100PG
BrandLegrand
$26.825
Each (In a Pack of 4)
units
Light Duty Tray 3m 100 mm 12mm Pre-Galvanised Steel Swifts
RS Stock No. 202-9542
Mfr. Part No.LT75-2
$48.446
Each (In a Pack of 8)
units
Light Duty Tray 2m 75 mm 20mm PVC -
RS Stock No. 202-9558
Mfr. Part No.LT100-2
$50.635
Each (In a Pack of 8)
units
Light Duty Tray 2m 100 mm 20mm PVC -
RS Stock No. 202-9564
Mfr. Part No.LT150-2
$68.738
Each (In a Pack of 4)
units
Light Duty Tray 2m 150 mm 20mm PVC -
RS Stock No. 202-9520
Mfr. Part No.LT50-2
$28.743
Each (In a Pack of 8)
units
Light Duty Tray 2m 50 mm 20mm PVC -
RS Stock No. 852-508
Mfr. Part No.SSL/75/H/SS
BrandLegrand
$169.53
Each (In a Pack of 2)
units
Light Duty Tray 3m 75 mm 12mm Stainless Steel Swifts
RS Stock No. 153-3728
Mfr. Part No.7027262
BrandRittal
$124.58
1 Pair
Pair(s)
- - - - - -
Related Products
Bends, risers, tee pieces, and couplers The bends ...
Description:
Bends, risers, tee pieces, and couplers The bends and risers are adjustable between 0° and 90° The coupler set will join two lengths of tray.
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...
The clamp assembly is a simpler cost-effective alternative ...
Description:
The clamp assembly is a simpler cost-effective alternative to the fast coupler - use two or three sets for 150mm or 300mm respectively.
The fast coupler is a snap-fit coupler for ...
Description:
The fast coupler is a snap-fit coupler for joining straight lengths together - use two per join.