IEC Connectors

IEC Connectors are used as power couplers for electrical appliances. IEC refers to the set of standards from the International Electrotechnical Commission, ensuring that the power cords for appliances conform to a standardized set of safety requirements for appliances not exceeding a 250 V ac voltage or 16 A rated current.For everything to domestic kitchen equipment to computer hardware in office environments, the IEC connector is available in different sizes and shapes to accommodate the current, temperature and earthing requirements of different appliances. IEC Types:
  • C1/C2- Used for small electrical appliances such as electric trimmers or shavers.
  • C5/C6- Known as a clover leaf, this power connector is used in smaller electrical appliances such as projectors.
  • C7/C8- The figure-eight connector is commonly used in personal stereo systems and some older laptop models.
  • C13/C14- This connector is used for larger electrical appliances, such as kitchen appliances, instrumentation amplifiers and computer hard drives.
  • C15/C16- This connector is often referred to as a kettle lead due to its use in powering electric kettles. They are well suited to this task due to their designation as a hot condition coupler, and having a high temperature rating
  • C15A/C16A- Is similar to the C15 and C16, but is rated for a higher temperature.
  • C17/C18- Is an unearthed power connector that is used in audio applications when audio quality is a concern.
  • C19/C20- Is a power connector for high current applications, such as uninterruptible power supplies or power distribution units.

...
Read more Read less

Filters

Viewing 61 - 80 of 346 products
Results per page
Description Price IEC Connector Type Mounting Type Gender Current Rating Body Orientation Termination Method Switch Type Number of Fuses Voltage Rating Rewireable Fuse Size Maximum Cable Diameter Shuttered Connector Size
RS Stock No. 295-8620
Mfr. Part No.PX0587/WH
BrandBulgin
$7.02
Each
units
C13 Cable Mount Female 10A Straight Screw Down - - 250 V ac - - - - -
RS Stock No. 261-5878
Mfr. Part No.BZV03/Z0000/01
BrandBulgin
$11.49
Each
units
C14 Snap-In Male 10A Straight Solder - - 250 V ac - - - - -
RS Stock No. 125-9270
Mfr. Part No.4312.0009
BrandSchurter
$16.73
Each
units
S16 Panel Mount Male 10 (IEC) A, 15 (UL/CSA) A Straight Solder 3 Pole - 250 V ac - - - - -
RS Stock No. 173-7981
Mfr. Part No.4301.3211
BrandSchurter
$7.646
Each (In a Box of 50)
units
C14 Panel Mount Male 10A Right Angle Screw Down None 1 250 V ac - 5 x 20mm - - -
RS Stock No. 730-0461
Mfr. Part No.4301.3211
BrandSchurter
$10.76
Each
units
C14 Panel Mount Male 10A Right Angle Screw Down None 1 250 V ac - 5 x 20mm - - -
RS Stock No. 295-8670
Mfr. Part No.PX0575/15/63/WH
BrandBulgin
$3.71
Each
units
C14 Snap-In Male 10A Straight Solder - - 250 V ac - - - - -
RS Stock No. 352-1869
Mfr. Part No.BVB01/Z0000/11
BrandBulgin
$18.83
Each
units
C14 Flange Mount - - Vertical Tab - 5 - - 20mm - - -
RS Stock No. 173-9936
Mfr. Part No.4312.0009
BrandSchurter
$18.227
Each (In a Box of 10)
units
S16 Panel Mount Male 10 (IEC) A, 15 (UL/CSA) A Straight Solder 3 Pole - 250 V ac - - - - -
RS Stock No. 352-1819
Mfr. Part No.BVA01/Z0000/10
BrandBulgin
$16.50
Each
units
C14 Panel Mount - 10A Vertical Tab 2 Pole 5 - - - - - -
RS Stock No. 870-3277
Mfr. Part No.DD11.0114.1110
BrandSchurter
$17.73
Each
units
C14 Screw Mount Male 10 (IEC) A, 8 (UL & CSA) A Straight Quick Connect 2 Pole 1 250 V ac - 5 x 20mm - - -
RS Stock No. 870-3603
Mfr. Part No.KD14.1101.109
BrandSchurter
$36.32
Each
units
C14 Snap-In Male 10A Straight Quick Connect 2 Pole 2 125 V ac, 250 V ac - 5 x 20 mm, 6.3 x 32 mm - - -
RS Stock No. 293-5891
Mfr. Part No.PX0588
BrandBulgin
$9.54
Each
units
C13 Cable Mount Female 10A Right Angle Screw Down - - 250 V ac - - - - -
RS Stock No. 261-5856
Mfr. Part No.PX0685
BrandBulgin
$12.99
Each
units
C14 Cable Mount Male 10A Right Angle Screw Down - - 250 V ac - - - - -
RS Stock No. 125-9269
Mfr. Part No.4312.0006
BrandSchurter
$58.42
Each
units
S16 PCB Mount, Screw Mount Male 10 (IEC) A, 15 (UL/CSA) A Straight Solder 3 Pole - 250 V ac - - - - -
RS Stock No. 211-4224
Mfr. Part No.PX0597
BrandBulgin
$8.23
Each
units
C15 Cable Mount Female 10A Straight Screw Down - - 250 V ac - - - - -
RS Stock No. 489-627
Mfr. Part No.0040.5000.2
BrandSchurter
$39.99
Each
units
C14 Panel Mount Male 10A Straight - - - 250 V ac - - - - -
RS Stock No. 867-1635
Mfr. Part No.4300.0921
BrandSchurter
$23.26
Each
units
C19 Cable Mount Female 16 (IEC) A, 20 (UL & CSA) A Straight Screw - - 250 V ac Yes - 12mm - -
RS Stock No. 110-955
Mfr. Part No.PX0783/15/63
BrandBulgin
$5.26
Each
units
C13 Snap-In Female 10A Straight Solder - - 250 V ac - - - - -
RS Stock No. 352-1831
Mfr. Part No.BVB01/Z0000/01
BrandBulgin
$8.82
Each
units
C14 Panel Mount Male 10A Straight Tab - - 250 V ac - - - - -
RS Stock No. 173-9665
Mfr. Part No.0040.5000.2
BrandSchurter
$27.739
Each (In a Bag of 100)
units
C14 Panel Mount Male 10A Straight - - - 250 V ac - - - - -
Related Products
Fused IEC inlet connector accepting 20mm fuses. Fuse ...
Description:
Fused IEC inlet connector accepting 20mm fuses. Fuse link is electrically separate to connector. Connection via 0.25 push on tags. Fuse carrier is interlocked and cannot be removed. Storage for one spare fuse. Rated at 240Vac/10ADepth 35mm. Suitable hole cutter ...
Compliant to CEE 22250Vac/ 6A rated (UL), 10A ...
Description:
Compliant to CEE 22250Vac/ 6A rated (UL), 10A all other approvals4.8mm (0.187mm) blade terminations. Screwdriver release cartridge accept 5 x 20mm fuses. Suitable panel hole cutter stock no. 618-538.
Interlocked fuse drawer accepts 20mm fuses. Fuse link ...
Description:
Interlocked fuse drawer accepts 20mm fuses. Fuse link electrically connected wire direct to plug using type 250 (0.25in) blade receptacles250Vac/ 10A rated, BS4491 compliant. Flammability Rating UL94 V-0Use insulating boot stock no. 801-932.
Panel mount IEC appliance inlets with a screw ...
Description:
Panel mount IEC appliance inlets with a screw mount in a right angle style that are suitable for automatic PCB assembling. Maximum pin temperature 70°C. Black thermoplastic housing. Panel thickness 1.5mm. Qualified for use in equipment according to IEC/EN 60950. ...