Crimp Terminal Kits

Crimping is a way of terminating strands of wire in order to connect them to external circuits, using a crimping tool to squeeze a wire hard enough to cold weld it to a given terminal. Crimp terminal kits consist of a crimping tool and various types of terminal.


The advantage of crimping is that it forms gas-tight connections, so there is less corrosion of the wire, and the joints are mechanically strong as there is no additional material used, as opposed to soldering.


How do crimp terminal kits work?


There are broadly three steps to using crimp terminal kits:

  1. Insert the desired terminal into the crimping tool
  2. Insert the wire into the terminal
  3. Squeeze together the handles of the crimping tool to cold weld the terminal onto the wire

Types of crimp terminal


Crimp terminals can have different connectors, such as rings, spades, and butt splice terminals, depending on how you want to connect to the external circuit. There are also insulated and non-insulated terminals, depending on your price point and the needs of the circuit. Non-insulated terminals are cheaper but may short in certain environments, whereas insulated terminals protect against this.


...
Read more Read less

Filters

Viewing 1 - 20 of 44 products
Results per page
Description Price Type Connector Type Kit Contents Contact Plating Contact Material
RS Stock No. 228-0321
BrandRS PRO
$68.42
Each
units
French Colour Coded Bootlace Ferrule 0.5mm² → 10mm² Wire End Ferrules - -
RS Stock No. 534-828
BrandRS PRO
$87.18
1 Kit
Kit(s)
230 Piece Insulated Terminal Blade, Butt Splice, Crimp Tool, Female Receptacle, Ring, Spade - -
RS Stock No. 109-797
BrandRS PRO
$122.22
Each
units
500 Piece Insulated Terminal Butt Splice, Crimp Tool, Pin, Ring, Shrouded Receptacle, Spade - -
RS Stock No. 513-2540
BrandRS PRO
$56.43
Each
units
400 Piece Bootlace Ferrule 400 Ferules for 0.5 → 2.5mm Cable Diameter - -
RS Stock No. 513-2562
BrandRS PRO
$53.16
Each
units
German Colour Coded Bootlace Ferrule 0.5mm² → 1.5mm² Wire End Ferrules - -
RS Stock No. 613-9952
BrandRS PRO
$388.94
1 Kit
Kit(s)
800 Piece Insulated Terminal Butt Splice, Compact Ratchet Tool, Crimp Tool, Female Receptacle, Pin, Ring, Spade - -
RS Stock No. 613-9974
BrandRS PRO
$217.41
1 Kit
Kit(s)
750 Piece Insulated Terminal Butt Splice, Ring, Spade - -
RS Stock No. 513-2578
BrandRS PRO
$33.32
Each
units
German Colour Coded Bootlace Ferrule 4mm² → 16mm² Wire End Ferrules - -
RS Stock No. 513-2556
BrandRS PRO
$34.61
Each
units
90 Piece Bootlace Ferrule 10 x 16 mm², 10 x 6 mm² Ferrules, 20 x 10 mm², 50 x 4 mm² - -
RS Stock No. 266-0288
BrandRS PRO
$89.26
Each
units
French Colour Coded Bootlace Ferrule 0.5mm² → 10mm² Wire End Ferrules and crimp tool - -
RS Stock No. 669-3661
Mfr. Part No.0 376 39
BrandLegrand
$919.36
Each
units
- - (1) Starfix Crimping Tool, (120) 0.5 mm² Ferrules, (120) 0.75 mm² Ferrules, (200) 2.5 mm² Ferrules, (240) 1 mm² Ferrules, (320) 1.5 mm² Ferrules - -
RS Stock No. 408-9681
Mfr. Part No.DS-MIXT-04-RSU
$58.04
Each
units
DuraSeal Service and Repair Heat Shrink Terminals and Splices Receptacle, Ring, Spade, Splice - -
RS Stock No. 425-8770
Mfr. Part No.CRIMP-SET PZ 6/5 -9028740000
BrandWeidmuller
$572.26
Each
units
- Bootlace Ferrule 0.5mm² → 6mm² Wire End Ferrules - -
RS Stock No. 414-6611
Mfr. Part No.165154
$591.36
Each
units
Repair PIDG Splices/Terminals Faston Receptacle, Partition, PG Butt Splice, Ring Tongue, Spade, Wire Pin - -
RS Stock No. 243-1052
Mfr. Part No.165346
$311.41
Each
units
PIDG Introduction Service PIDG Splices/Terminals, Plasti-Grip Terminals Case, Flanged Spade, Partition, PG Butt Splice, PIDG Ring Tongue, PIDG Spade, SRS Line Splice Connector, SRS PIDG Faton Receptacle, SRS PIDG Piggyback Faston - -
RS Stock No. 243-1046
Mfr. Part No.165430
$541.78
Each
units
- Plasti-Grip Terminals and Splices Butt Splice, Closed End Connector, Piggyback, Pin, Receptacle, Ring, Spade - -
RS Stock No. 278-9395
Mfr. Part No.142945-1
$604.80
Each
units
- Plasti-Grip Terminals and Splices Clip, Connection, Fork, Round Terminal - -
RS Stock No. 414-6841
Mfr. Part No.H-BOX 4,0-16,0QMM -9025920000
BrandWeidmuller
$66.47
Each
units
German Colour Coded Bootlace Ferrule - - -
RS Stock No. 374-4292
Mfr. Part No.H-BOX 0,5-2,5QMM DIN -9025430000
BrandWeidmuller
$79.27
Each
units
German Colour Coded Bootlace Ferrule 0.5mm² → 2.5mm² Wire End Ferrules - -
RS Stock No. 847-8868
Mfr. Part No.KP-1075Y
BrandPanduit
$132.85
Each
units
- Insulated Terminal (10) BSV10X, (10) BSV14X, (10) BSV18X, (10) DNF14-250, (10) DNF18-250, (10) JN418-212 Nylon Wire Joint, (10) PV10-8R, (20) PV18-6F, (20) PV18-8R Vinyl Ring Terminal, PV10-10R Vinyl Ring Terminal, PV14-10R, PV14-8F Vinyl Fork Terminal - -
Related Products
PIDG blade wire crimp terminals consisting of a ...
Description:
PIDG blade wire crimp terminals consisting of a precision-formed metal wire barrel containing serrations which provide maximum contact and tensile strength after crimping. This barrel is enclosed in a copper sleeve and the whole is encased in a nylon colour ...
Stripax plus pliers allow you to cut, strip ...
Description:
Stripax plus pliers allow you to cut, strip wires between 0.5 and 2.5 mm2 and crimp wire-end ferrules with the same cross section.Wires can be cut and stripped without clutch crimping the wire-end ferrules. Crimping complies with EN standard 50027 ...
A range of french colour coded insulated bootlace ...
Description:
A range of french colour coded insulated bootlace wire ferrules made from soft tin plated electrolytic copper with a polypropylene insulating sleeve with dimensions that conform to DIN 46228-4: 1990-09 and color coding to french standard NF C 63-023: 1994-02.For ...
Duraseal bullet terminal constructed of tin plated brass ...
Description:
Duraseal bullet terminal constructed of tin plated brass with a heat shrinkable insulation sleeve. • The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important• Kits ...