Crimp Terminal Kits

Crimping is a way of terminating strands of wire in order to connect them to external circuits, using a crimping tool to squeeze a wire hard enough to cold weld it to a given terminal. Crimp terminal kits consist of a crimping tool and various types of terminal.


The advantage of crimping is that it forms gas-tight connections, so there is less corrosion of the wire, and the joints are mechanically strong as there is no additional material used, as opposed to soldering.


How do crimp terminal kits work?


There are broadly three steps to using crimp terminal kits:

  1. Insert the desired terminal into the crimping tool
  2. Insert the wire into the terminal
  3. Squeeze together the handles of the crimping tool to cold weld the terminal onto the wire

Types of crimp terminal


Crimp terminals can have different connectors, such as rings, spades, and butt splice terminals, depending on how you want to connect to the external circuit. There are also insulated and non-insulated terminals, depending on your price point and the needs of the circuit. Non-insulated terminals are cheaper but may short in certain environments, whereas insulated terminals protect against this.


...
Read more Read less

Filters

Viewing 41 - 44 of 44 products
Results per page
Description Price Type Connector Type Kit Contents Contact Plating Contact Material
RS Stock No. 175-6754
Mfr. Part No.725972-0
$147.05
Each
units
Repair Insulated Terminal Butt Splice, Closed End Connector, Piggyback, Pin, Receptacle, Ring, Spade, Superchamp II Tool - -
RS Stock No. 803-4301
Mfr. Part No.1202580
$1,373.44
Each
units
Crimp Terminal Ferrule AI 10-12 RD x 300, AI 16-12 BU x 200, AI 25-16 YE x 200, Crimpfox 25R x 1, Wirefox-D 40 x 1 - -
RS Stock No. 220-6216
Mfr. Part No.06490820000
BrandSES
$42.73
Each
units
- Bootlace Ferrule Ferrules of 10 mm² x 20, Ferrules of 16 mm² x 10, Ferrules of 4 mm² x 50, Ferrules of 6 mm² x 20 - -
RS Stock No. 175-7527
Mfr. Part No.06490810000
$148.17
Each
units
- Bootlace Ferrule Ferrules of 0.5 mm² x 50, Ferrules of 0.75 mm² x 100, Ferrules of 1 mm² x 100, Ferrules of 1.5 mm² x 100, Ferrules of 2.5 mm² x 50 - -
Related Products
The PAA piezo ceramic audio design sample kit ...
Description:
The PAA piezo ceramic audio design sample kit from Sonitron includes four different piezo audio amplifiers and is ideal for experimenting with the included speaker. The kit consists of a SPS-6555-03 speaker built into a small plastic case, with four ...
Four sizes of brass IP66 cable glands complying ...
Description:
Four sizes of brass IP66 cable glands complying with EN 50262 for use with un-armoured plastic or rubber sheathed cables. Supplied in kit form, comprising of 2 glands complete with 2 steel locknuts and 2 PVC shrouds. Suitable for indoor ...
Featuring an assortment of the most common anti-kink ...
Description:
Featuring an assortment of the most common anti-kink and feed-through grommets, HellermannTyton presents this black PVC grommet kit. Designed for electrical wire and cable, the PVC material provides a high resistance to chemicals and other environmental influences. Installation is quick ...
The Raytech CLIK -FIRE is a fast, ready ...
Description:
The Raytech CLIK -FIRE is a fast, ready to use joint for 0.6/1 kV extruded cables. Formed by a robust case which is pre-filled with a suitable gel, which snaps closed to provide fast and easy installation. Available in 2 ...