Fuse Holders & Accessories

We offer a superb range of fuse holders and accessories for domestic and commercial use from a range of brands including Schurter, Littelfuse, Cooper Bussmann and Mersen.

What is a fuse holder?

A fuse holder is a casing or housing into which fuses are inserted, simply to hold the fuse in place in order to fulfill its function. They come in many shapes, colours and sizes depending on where they need to be installed.

What types of fuse holder are available?

You will find the following types on the site:

  • Base mount: enables the base of the holder to be attached to something with holes for screws
  • Bottle fuse: a holder for cylindrical bottle fuses, usually with a cap to complete the circuit
  • Inline: a housing for a fuse in a wire or cable, usually for safety purposes
  • Panel mount: another housing with a screw cap that can be mounted into a panel for easy access to the fuse
  • Rail mount: a holder that contains fuses that are slotted into sets with metal contacts

We also stock fuse blocks, clips, switches and covers as well as PCB mounts and other types of accessories.

Why do fuse holders melt?

A fuse holder making poor contact with a fuse can be the cause of this, that is if the fuse has not blown. Current flowing through the electrical circuit, below the fuse's rating, will cause heat from the resistance. This can generate enough heat to cause the fuse holder to melt. It may not be immediate and can happen suddenly after installation.

How do I clean a fuse holder?

  • Ideally wear gloves, either rubber or plastic
  • Ensure the mains power is off and there are no live wires
  • Use a dry cloth or toothbrush to clean the connector springs
  • A small piece of emery cloth wrapped around a screwdriver can be used to scrub the inside of the fuse holder itself
  • Use a small paintbrush to apply lubricant to all areas of the fuse holder once cleaned
Fuse Blocks
Fuse Blocks
Fuse Clips
Fuse Clips
Fuse Covers
Fuse Covers
Fuse Holder Accessories
Fuse Holder Accessories
Fuse Holders
Fuse Holders
Fuse Pullers & Testers
Fuse Pullers & Testers
Neutral Links
Neutral Links
Solid Links
Solid Links

1642 Products showing for Fuse Holders & Accessories

Sort By
10 of 83
In Stock
Mersen 50A Rail Mount Fuse Holder for 14 x 51 mm, 3P-Pole, 690V ac
  • RS Stock No. 768-3769
  • Mfr. Part No. S331032 / CMS143
Subtotal (1 unit)
$703.57(exc. GST)
$703.57/unit
In Stock
Schurter 20A Panel Mount Fuse Holder, 250V ac
  • RS Stock No. 197-9519
  • Mfr. Part No. 0031.1672
Subtotal (1 pack of 5 units)
$33.57(exc. GST)
$6.714/unit
In Stock
Schurter 16A Panel Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 250V ac
  • RS Stock No. 384-027
  • Mfr. Part No. 3101.0015
Subtotal (1 pack of 5 units)
$52.45(exc. GST)
$10.49/unit
In Stock
Mersen 50A Rail Mount Fuse Holder for 14 x 51 mm, 3P-Pole, 690V ac
  • RS Stock No. 768-3762
  • Mfr. Part No. F331067 / CMS143M
Subtotal (1 unit)
$714.08(exc. GST)
$714.08/unit
Temporarily out of stock
Eaton Fuse Holder DIN Rail Adapter Fuse Holder
  • RS Stock No. 414-213
  • Mfr. Part No. DIN-20-32
Subtotal (1 pack of 10 units)
$291.45(exc. GST)
$29.145/unit
In Stock
ETI 25A Bottle Fuse Holder, 1P-Pole for D03, 500V ac
  • RS Stock No. 289-8900
  • Mfr. Part No. DIIGAUGEKIT
Subtotal (1 unit)
$29.28(exc. GST)
$29.28/unit
In Stock
Schurter 6.3A In-line Fuse Holder for 6.3 x 32 mm, 32 V ac, 32V dc
  • RS Stock No. 703-2815
  • Mfr. Part No. 8601.2001.08
Subtotal (1 bag of 10 units)
$51.12(exc. GST)
$5.112/unit
In Stock
Mersen 63A Bottle Fuse Holder, 2P-Pole for D02, 400V ac
  • RS Stock No. 715-9020
  • Mfr. Part No. J1012606 / 05862.063000
Subtotal (1 unit)
$385.12(exc. GST)
$385.12/unit
Temporarily out of stock
NEMIQ 30A Fuse Holder, 58V
  • RS Stock No. 841-920
  • Mfr. Part No. ZC 712 AB-PP1
Subtotal (1 unit)
$7.88(exc. GST)
$7.88/unit
In Stock
Wickmann 6.3A PCB Mount Fuse Holder, 250V ac
  • RS Stock No. 167-9297
  • Mfr. Part No. 55900000001
Subtotal (1 pack of 10 units)
$15.08(exc. GST)
$1.508/unit
In Stock
Bulgin 6.3A Base Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 250V ac
  • RS Stock No. 213-7586
  • Mfr. Part No. FX0360
Subtotal (1 pack of 5 units)
$39.67(exc. GST)
$7.934/unit
Temporarily out of stock
Bulgin 10A Panel Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 250V ac
  • RS Stock No. 359-5933
  • Mfr. Part No. FX0359
Subtotal (1 pack of 5 units)
$95.84(exc. GST)
$19.168/unit
Temporarily out of stock
Bulgin 10A Panel Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 250V ac
  • RS Stock No. 376-6602
  • Mfr. Part No. FX0369/2
Subtotal (1 pack of 5 units)
$56.21(exc. GST)
$11.242/unit
Limited stock
RS PRO 5A In-line Fuse Holder for 5 x 20 mm, 250V
  • RS Stock No. 284-6487
Subtotal (1 pack of 10 units)
$67.77(exc. GST)
$6.777/unit
Temporarily out of stock
Bulgin 10A In-line Fuse Holder, 250V ac
  • RS Stock No. 208-8269
  • Mfr. Part No. FX0380/BK
Subtotal (1 pack of 2 units)
$59.41(exc. GST)
$29.705/unit
In Stock
Littelfuse 20A Panel Mount Fuse Holder, 25V
  • RS Stock No. 769-0170
  • Mfr. Part No. 03453LF1H
Subtotal (1 unit)
$9.05(exc. GST)
$9.05/unit
In Stock
Bulgin 10A In-line Fuse Holder, 250V ac
  • RS Stock No. 420-050
  • Mfr. Part No. FX0385
Subtotal (1 pack of 5 units)
$243.60(exc. GST)
$48.72/unit
Temporarily out of stock
Eaton 30A Panel Mount Fuse Holder for 10 x 38 mm, 600V ac
  • RS Stock No. 233-0574
  • Mfr. Part No. BK1-HPG-615E
Subtotal (1 pack of 10 units)
$120.12(exc. GST)
$12.012/unit
In Stock
Bulgin 10A PCB Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 250V ac
  • RS Stock No. 415-058
  • Mfr. Part No. FX0457
Subtotal (1 pack of 5 units)
$149.35(exc. GST)
$29.87/unit
In Stock
Littelfuse 6.3A Base Mount Fuse Holder for Mini, 250V ac
  • RS Stock No. 787-4243
  • Mfr. Part No. 64700001003
Subtotal (1 pack of 5 units)
$9.22(exc. GST)
$1.844/unit
1
10
83
Results per page

Related links