Non-Resettable Wire Ended Fuses

Non-resettable wire ended fuses are a type of single use circuit protection device that are can be soldered onto printed circuit boards or carriers. This category encompasses any type of single-use fuse that consist of a fuse body with two wires extended outside of the body.

How do non-resettable wire ended fuses work?

Non-resettable wire ended fuses form part of a circuit and allow an electrical current to flow through them. When a fault such as overcurrent or a short circuit is detected, the metal strip in the fuse body will melt, breaking the circuit and preventing damage. This type of fuse must be replaced after it has blown.

Types of non-resettable wire ended fuses

Non-resettable wire ended fuses differ broadly, mainly in their shape. The fuse body can be a short, fat cylinder or a longer, thinner one, and the wires may extend in parallel both from the same side of the fuse, or in opposite directions from either side of the fuse body. They also differ in their current and voltage rating, and the range of their operating temperature.


...
Read more Read less

Filters

Viewing 1 - 20 of 578 products
Results per page
Description Price Current Rating Lead Orientation Voltage Rating Fuse Speed Body Material Body Diameter Body Length Body Width Body Height Wire Length Wire Pitch Breaking Capacity at Maximum Voltage Rating Minimum Operating Temperature Maximum Operating Temperature
RS Stock No. 611-9346
BrandRS PRO
$1.149
Each (In a Pack of 10)
units
6.3A Radial 250V ac T Nylon 8.5mm - - 8mm 4.3mm 5.08mm 50 A -40°C +85°C
RS Stock No. 767-5128
BrandRS PRO
$0.272
Each (In a Pack of 10)
units
2A Radial 250V - Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 911-3552
BrandRS PRO
$0.563
Each (In a Pack of 10)
units
3.15A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 764-9576
BrandRS PRO
$0.765
Each (In a Pack of 10)
units
500mA Axial 250V ac FF Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac -55°C +125°C
RS Stock No. 911-3559
BrandRS PRO
$0.478
Each (In a Pack of 10)
units
2.5A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 911-3568
BrandRS PRO
$0.478
Each (In a Pack of 10)
units
6.3A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 764-9536
BrandRS PRO
$0.364
Each (In a Pack of 10)
units
500mA Axial 250V ac T Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac/125 V dc -55°C +125°C
RS Stock No. 764-9551
BrandRS PRO
$0.51
Each (In a Pack of 10)
units
2A Axial 250V ac T Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac/125 V dc -55°C +125°C
RS Stock No. 767-5171
BrandRS PRO
$1.119
Each (In a Pack of 10)
units
250mA Radial 250V - Thermoplastic 8.35 - - 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 911-3546
BrandRS PRO
$0.595
Each (In a Pack of 10)
units
1.6A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 767-5229
BrandRS PRO
$0.917
Each (In a Pack of 10)
units
3.15A Radial 250V - Thermoplastic 8.35mm - - 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 911-3528
BrandRS PRO
$0.50
Each (In a Pack of 10)
units
500mA - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 764-9567
BrandRS PRO
$0.957
Each (In a Pack of 10)
units
3.5A Axial 250V ac T Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac/125 V dc -55°C +125°C
RS Stock No. 767-5207
BrandRS PRO
$0.704
Each (In a Pack of 10)
units
500mA Radial 250V - Thermoplastic 8.35mm - - 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5052
BrandRS PRO
$0.498
Each (In a Pack of 10)
units
3.15A Radial 250V T Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 911-3534
BrandRS PRO
$0.65
Each (In a Pack of 10)
units
1A - 250V ac T Ceramic 3.6mm 10mm - - 30mm - 35 A at 250 V ac -55°C +125°C
RS Stock No. 767-5153
BrandRS PRO
$0.996
Each (In a Pack of 10)
units
3.15A Radial 250V - Thermoplastic 8.35 - - 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5046
BrandRS PRO
$0.276
Each (In a Pack of 10)
units
1.6A Radial 250V T Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 764-9573
BrandRS PRO
$1.072
Each (In a Pack of 10)
units
7A Axial 250V ac T Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac/125 V dc -55°C +125°C
RS Stock No. 764-9514
BrandRS PRO
$0.347
Each (In a Pack of 10)
units
1.5A Axial 125V ac/dc T Epoxy Coated 2.65mm - - 7.1mm 28mm - 50 A @ 125 V ac/dc -55°C +125°C
Related Products
Schurter UMT fuses offer primary protection on SMD ...
Description:
Schurter UMT fuses offer primary protection on SMD PCB's. There are several applications that are suited to the performance characteristics of the UMT SMD fuse. These applications include industrial electronic, sensors, power supplies, explosion protection and lighting. Surface Mount. High ...
The Schurter axial F leaded fuse is designed ...
Description:
The Schurter axial F leaded fuse is designed for direct solder mounting on PCB. This axial lead is made up of tin-plated copper. It is a fast-acting fuse with high breaking capacity. Its service temperature ranges between -55°C and 85°C. ...
All fuses have Thermoplaste Polyamide bodies. Miniature fuses ...
Description:
All fuses have Thermoplaste Polyamide bodies. Miniature fuses for soldering onto PCB.Black UL 94-V0 self-extinguishing thermoplastic enclosure.Fast-acting (FRT250F) or time-delayed (FRT250T) fuses with low breaking capacity.
RS slow blow TE5 fuses are a convenient ...
Description:
RS slow blow TE5 fuses are a convenient and reliable solution to a vast array of application requirements. Base and cap in black thermoplastic, UL 94-V0Round pins in tin-plated copper. Vibration MIL-STD-202G, Method 201 (10-55Hz x 3 axis / no ...