Enclosure Heaters

Enclosure heaters, or cabinet heaters, are used to warm the air inside electrical devices and to regulate the internal conditions of your device. They are used in a variety of devices, most commonly heaters and 3D printers


How enclosure heaters work


Enclosure heaters are designed to help electric, electronic, pneumatic, hydraulic and mechanical equipment to perform at its best by protecting against low temperatures, condensation and corrosion. They do this by providing an evenly distributed interior air temperature. 


Why are enclosure heaters important?


By keeping the internal temperature of a device as little as five degrees higher than the ambient temperature, the risk of condensation can be eliminated. The warmer the air, the more water vapour it can contain. When air is cooled it can no longer hold the water vapour and reaches its dew point – this is where condensation arises. It's important to avoid the presence of condensation in your device as this can cause it to fail or become damaged. 


...
Read more Read less

Filters

Viewing 1 - 20 of 186 products
Results per page
Description Price Output Power Air Flow Input Power Rating Supply Voltage Surface Temperature Depth Height Width Frequency Nominal Current Series
RS Stock No. 224-492
Mfr. Part No.04001.0-00
BrandSTEGO
$113.89
Each
units
30W - 30W 140 → 250 V ac 65°C 50mm 65mm 70mm - - -
RS Stock No. 759-4814
Mfr. Part No.Nimbus D65, 370177,01
$53.18
Each
units
30W - - 110 → 240 V ac/dc - - - - - - -
RS Stock No. 605-605
Mfr. Part No.ACH60 60W 230V
$56.26
Each
units
60W - 60W 230 V ac 93°C 67mm 70mm 121mm - - -
RS Stock No. 103-207
Mfr. Part No.FLH045 17004505007
$81.79
Each
units
45W 50 m³/h, 61 m³/h 40W 110 → 250 V ac 105°C 50mm 65mm 70mm - - -
RS Stock No. 103-421
Mfr. Part No.FLH100 17010005007
$130.09
Each
units
100W 50 m³/h, 61 m³/h 100W 110 → 250 V ac 130°C 50mm 140mm 70mm - - -
RS Stock No. 415-2975
Mfr. Part No.FGC1513.2
$142.67
Each
units
150W 12.4m³/h - 100 → 240 V ac 72°C 42mm 107mm 42mm - - -
RS Stock No. 282-1326
Mfr. Part No.02700.0-00
BrandSTEGO
$444.65
Each
units
475W 35m³/h - 230 V ac - 128mm 165mm 100mm - - -
RS Stock No. 159-2049
Mfr. Part No.04000.0-00
BrandSTEGO
$72.87
Each
units
15W - - 140 → 250 V ac 60°C 50mm 65mm 70mm - - -
RS Stock No. 779-0801
Mfr. Part No.FLH-T800 17080310007
$456.21
Each
units
800W 160 m³/h, 180 m³/h 850W 230 V 40°C 164mm 100mm 150mm - - -
RS Stock No. 415-2931
Mfr. Part No.FGC0501.2
$128.96
Each
units
20W 5.1m³/h - 12 V dc 35°C 27mm 72mm 27mm - - -
RS Stock No. 282-1045
Mfr. Part No.03100.0-00
BrandSTEGO
$284.62
Each
units
100W 35m³/h - 230 V ac - 112mm 22mm 80mm - - -
RS Stock No. 605-582
Mfr. Part No.ACH20 20W 230V
$45.21
Each
units
20W - 20W 230 V ac 45°C 67mm 70mm 65mm - - -
RS Stock No. 677-0752
Mfr. Part No.FGC3000
$250.70
Each
units
200 W, 300 W, 400 W 10m³/h - 230 V ac 70°C 70mm 96.5mm 71mm - - -
RS Stock No. 603-328
Mfr. Part No.ACH100 100W 230V
$78.70
Each
units
100W - 100W 230 V ac 85°C 67mm 70mm 191mm - - -
RS Stock No. 103-544
Mfr. Part No.FLH150 17015005007
$140.16
Each
units
150W 50 m³/h, 61 m³/h 150W 110 → 250 V ac 150°C 50mm 215mm 70mm - - -
RS Stock No. 103-342
Mfr. Part No.FLH250 17025010007
$208.80
Each
units
250W 50 m³/h, 61 m³/h - 230 V ac 70°C 104mm 183.5mm 85mm - - -
RS Stock No. 788-3679
Mfr. Part No.03074.0-01
BrandSTEGO
$147.43
Each
units
- 150m³/h 500W 230 V ac -40 → +50°C 169mm 45mm 127mm - - -
RS Stock No. 415-2969
Mfr. Part No.FGC1031.2
$171.37
Each
units
100W 12.4m³/h - 100 → 240 V ac 48°C 42mm 72mm 42mm - - -
RS Stock No. 788-3672
Mfr. Part No.03073.0-00
BrandSTEGO
$265.54
Each
units
- 150m³/h 600W 230 V ac -40 → +50°C 169mm 45mm 127mm - - -
RS Stock No. 415-2981
Mfr. Part No.FGC1507.2
$164.71
Each
units
230W 12.4m³/h - 100 → 240 V ac 120°C 42mm 107mm 42mm - - -
Related Products
Sealed shielded clamps for heating cylindrical parts such ...
Description:
Sealed shielded clamps for heating cylindrical parts such as press nozzles for injecting thermoplastic materials or any other application requiring a perfect seal on resistance and electrical connection. Sealed brass band heater with folded ends. Silver solder seal. Band heater ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. High power to size ratio - 3 power settings. Lightweight and easy to fit. Harness length 240mm. Electrical ...
From DBK enclosures, this range of conduction/convection PTC ...
Description:
From DBK enclosures, this range of conduction/convection PTC heating elements are 'Self regulating' and housed in a compact flat alloy construction, allowing perfect heat transmission to the thermal medium. This means that no thermal cut-out or thermostat is required. These ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Self regulating PTC heater. Protection Class IILead wire silicone, UL 3135, white, AWG20, Length = 100±5mm. Termination 6mm ...