Heatsink Mounting Accessories

Heatsink mounting accessories support the attachment of heatsinks to their components. Heatsinks are passive heat exchangers: they take the heat generated by electrical or mechanical devices and transfer it to a disposable medium, often liquid coolant or air. There's a wide selection of heatsink mounting accessories, including clips, adhesive tape, retaining springs, hi-flow insulators and graphite pads. Choosing the right mounting accessories can improve your heatsink’s performance.

Types of heatsink mounting accessories

A range of heatsink mounting accessories is available, depending on your needs. Spring clips can be used with all sizes of vertical-mount heatsinks where transistors have no mounting tabs. Heatsink spring mount rivets are used to fasten a heatsink to a processor on a printed circuit board. They provide continuous pressure to a heatsink to improve the conductivity. For an alternative to screw mounting and clip mounting, adhesive tape allows a double-sided high bond-strength attachment.

Why use heatsink mounting accessories?

Heatsink mounting accessories provide greater reliability within your cooling system and ensure it can operate to its best ability. The right accessories can also contribute to reduced energy use and lower costs.


...
Read more Read less

Filters

Viewing 1 - 20 of 59 products
Results per page
Description Price Accessory Type For Use With
RS Stock No. 263-239
BrandRS PRO
$4.59
1 Kit
Kit(s)
Transistor Mount Kit TO-3
RS Stock No. 712-8225
BrandRS PRO
$5.19
1 Kit
Kit(s)
Transistor Mount Kit TO-220
RS Stock No. 707-4815
BrandRS PRO
$32.04
Each
units
Thermal Interface Tape Heatsink
RS Stock No. 707-4819
BrandRS PRO
$26.51
Each
units
Thermal Interface Tape Heatsink
RS Stock No. 298-500
BrandRS PRO
$4.38
Each
units
Transistor Mount Kit SOT-93, TO-126, TO-128, TO-202, TO-220, TO-3P
RS Stock No. 298-493
BrandRS PRO
$9.01
Each
units
Transistor Mount Kit SO-55, TO-3, TO-66
RS Stock No. 707-4828
BrandRS PRO
$26.42
Each
units
Thermal Interface Tape Heatsink
RS Stock No. 485-8881
BrandRS PRO
$1.298
Each (In a Pack of 5)
units
Gull Wing Clip TO-3P
RS Stock No. 485-8897
BrandRS PRO
$2.388
Each (In a Pack of 5)
units
Gull Wing Clip TO-220
RS Stock No. 131-1216
BrandRS PRO
$1.034
Each (In a Pack of 5)
units
Gull Wing Clip TO-220
RS Stock No. 131-1238
BrandRS PRO
$0.62
Each (In a Pack of 5)
units
Spring Clip TO-218, TO-220, TO-247, TO-3P
RS Stock No. 402-456
Mfr. Part No.W4605 KIT
BrandWinslow
$6.92
1 Kit
Kit(s)
Transistor Mount Kit TO-220
RS Stock No. 477-4862
Mfr. Part No.BP100-0.005-00-00-50
BrandBergquist
$4.109
Each (In a Pack of 10)
units
Adhesive Tape Heatsink
RS Stock No. 189-7912
Mfr. Part No.TF3/2
$5.28
Each
units
Socket TO-3
RS Stock No. 477-4878
Mfr. Part No.BP100-0.005-00-00-25
BrandBergquist
$2.682
Each (In a Pack of 10)
units
Adhesive Tape Heatsink
RS Stock No. 754-5945
Mfr. Part No.HSR-1
BrandRichco
$18.34
1 Bag of 20
Bag(s)
Spring Mount Rivet Heatsink
RS Stock No. 477-4856
Mfr. Part No.BP100-0.005-00-00-12
BrandBergquist
$37.14
Each
units
Adhesive Tape Heatsink
RS Stock No. 354-9025
Mfr. Part No.HF-S43
BrandSunhayato
$15.93
1 Bag of 3
Bag(s)
Double Sided Tape Heatsink
RS Stock No. 329-3299
Mfr. Part No.HF625-0.005-00-1212
BrandBergquist
$117.55
Each
units
Hi-Flow Insulator Heatsink
RS Stock No. 722-6921
Mfr. Part No.THFU 1
$0.252
Each (In a Pack of 25)
units
Retaining Spring LAM Heatsink, SK Heatsink, TO-218, TO-220, TO-247, TO-248, TO-3P
Related Products
Universal snap in transistor holder spring for transistor ...
Description:
Universal snap in transistor holder spring for transistor style housing types TO 218, TO 220, TO 247, TO 264 Easy assembly and secure grip when using special flute geometry in heatsinks. Maximum heat transfer between component and cooling element.
Dry thermally conductive graphite washers for use where ...
Description:
Dry thermally conductive graphite washers for use where electrical conductivity together with excellent heat transfer are required. Thermal performance is comparable to that of metal-oxide-filled silicone grease but with no shrinkage or drying out over long periods of time. Low ...
The insulation covers consist of polyamide reinforced by ...
Description:
The insulation covers consist of polyamide reinforced by glass fibre, and the compensation sockets are made from nickel-plated brass. The push-fit sockets compensate for the varying flange heights of different transistor types.
Designed to replace grease as a thermal interface. ...
Description:
Designed to replace grease as a thermal interface. Easy to handle in the manufacturing environment. Tack free and scratch resistant. Flame rating UL 94 V-0.