Extractor Fans

Extractor fans also known as wall fans are designed to remove moisture, fumes and unwanted odours from the air to improve the air quality. In domestic and commercial properties it is important to reduce condensation and provide ventilation in the kitchen, bathroom, shower room, wet room and laundry room. Nowadays it is a legal requirement to have an extractor fan in new builds.


The airflow of a fan is in cubic feet per hour (m³/h) and is an important factor when deciding on which type of fan you require. A large variety of wall fans is available in a range of styles and colours to suit all room sizes and locations. Some of these ventilation fans can be very nosy therefore silent extractor fans are worth considering if noise is an issue. Most fans come with a mounting kit, pull cord or automatic shutter options and some have special features such as humidistat, timers and remote controls


Basic types of fans for extraction, intake and ventilation are:


  • Axial fans – most common type, usually wall mounted to internal walls and depending on the cavity depth these wall mounted fans require ducting to reach the exterior wall

  • Centrifugal extractor fans - which are ceiling mounted. General found in commercial and industrial environments that need elongated ducting and can be nosy

  • Inline extractor fan – can be axial or centrifugal but they are not installed on walls and ceilings but found in the loft space above a ceiling

Where to place fans?


  • Kitchen – removes cooking smells, steam and traps grease therefore providing healthier environment

  • Bathroom – to provide ventilation and reduce condensation from the steam after a hot shower or bath. This prevents damp and mouldy patches which can cause health problems as unventilated conditions are ideal for bacteria to live. Also removes unwanted bad smells after using the toilet

  • Shower rooms or wet rooms – bathroom ceiling extractor fans remove moisture from showering

  • Window – some window fans can be mounted on the window but a special kit is required for these window vents

...
Read more Read less

Filters

Viewing 1 - 20 of 170 products
Results per page
Description Price Function Air Flow Noise Level Mounting Face Diameter Face Dimensions Depth Face Height Face Width Configuration Series Special Features Termination Type
RS Stock No. 200-0901
Mfr. Part No.GX6
BrandXpelair
$251.68
Each
units
Extraction 266m³/h 37dB(A) Window Mounted - 226 x 210mm 112mm 226mm 210mm - - - -
RS Stock No. 184-0124
Mfr. Part No.LV100T
BrandXpelair
$211.74
Each
units
Extraction 87m³/h 37dB(A) Wall Mounted 100mm - - - - - - - -
RS Stock No. 884-0963
Mfr. Part No.VASF100T
BrandVent-Axia
$225.89
Each
units
Ventilation - 26dB(A) Wall Mounted, Window Mounted 100mm 159 x 159mm 117mm 159mm 159mm Rectangular VASF100 Backdraught Shutters, High Efficiency Motor, Stylish Discrete Design -
RS Stock No. 921-1672
Mfr. Part No.Lo-Carbon Svara
BrandVent-Axia
$287.28
Each
units
Extraction - 17 → 20dB(A) Wall Mounted, Window Mounted 177mm - 81mm - - Round - 3 Speed, Bluetooth Control, Continuous or Intermittent, Humidistat and Timer, IP44 -
RS Stock No. 884-0954
Mfr. Part No.VASF100B
BrandVent-Axia
$199.71
Each
units
Ventilation - 26dB(A) Wall Mounted, Window Mounted 100mm 159 x 159mm 117mm 159mm 159mm Rectangular VASF100 Backdraught Shutters, High Efficiency Motor, Stylish Discrete Design -
RS Stock No. 884-0966
Mfr. Part No.Silhouette 100B
BrandVent-Axia
$113.12
Each
units
Extraction 75m³/h 38dB(A) Ceiling Mounted, Panel Mounted, Wall Mounted 115mm 160 x 160mm 97mm 160mm 160mm Rectangular Silhouette Backdraught Shutter, Safety Extra Low Voltage Design, Unobtrusive Installation Screw
RS Stock No. 884-0960
Mfr. Part No.Silhouette 100T
BrandVent-Axia
$182.31
Each
units
Extraction 75m³/h 38dB(A) Ceiling Mounted, Panel Mounted, Wall Mounted 115mm 160 x 160mm 97mm 160mm 160mm Rectangular Silhouette Backdraught Shutter, Safety Extra Low Voltage Design, Unobtrusive Installation Screw
RS Stock No. 829-8836
Mfr. Part No.92963RS
BrandXpelair
$103.58
Each
units
Extraction 54 m³/h, 76 m³/h 15 dB(A), 29 dB(A) Ceiling Mounted, Panel Mounted, Wall Mounted, Window Mounted 200mm 200 (Dia)mm 131mm - - Round Simply Silent Timer -
RS Stock No. 884-0972
Mfr. Part No.Silhouette 100SVT
BrandVent-Axia
$276.88
Each
units
Extraction - 38dB(A) Ceiling Mounted, Panel Mounted, Wall Mounted 117mm 160 x 160mm 97mm 160mm 160mm Rectangular Silhouette Backdraught Shutter, Safety Extra Low Voltage Design, Unobtrusive Installation Screw
RS Stock No. 829-8858
Mfr. Part No.92966RS
BrandXpelair
$176.09
Each
units
Extraction 54 m³/h, 76 m³/h 15 dB(A), 29 dB(A) Ceiling Mounted, Panel Mounted, Wall Mounted, Window Mounted - 180 x 180mm 131mm 180mm 180mm Square Simply Silent Intermittent with Humidistat and Timer -
RS Stock No. 124-5315
Mfr. Part No.C6S
BrandXpelair
$121.01
Each
units
Extraction 194 → 217m³/h 41 → 44 dBA @ 3m Ceiling Mounted, Panel Mounted, Wall Mounted, Window Mounted - 228 x 228mm 143mm 228mm 228mm Square C6 Ceiling, Ghost Air Movement Technology, Knock-Out Section for Side Entry Wiring, Panel & Window Fitting, Sleek Design with Interchangeable, Suitable for Wall -
RS Stock No. 829-8851
Mfr. Part No.92962RS
BrandXpelair
$101.55
Each
units
Extraction 54 m³/h, 76 m³/h 15 dB(A), 29 dB(A) Ceiling Mounted, Panel Mounted, Wall Mounted, Window Mounted - 180 x 180mm 131mm 180mm 180mm Square Simply Silent Intermittent withTimer -
RS Stock No. 884-1004
Mfr. Part No.Solo Plus P
BrandVent-Axia
$260.19
Each
units
Extraction - 11.5 (Trickle) dBA, 24 (Min Boost) dBA, 34.5 (Max Boost) dBA Flush Mounted, Surface Mounted - 263 x 224mm 161mm 263mm 224mm Rectangular Solo Plus Adjustable Humidity Sensor, Adjustable Timer Overrun, Constant Trickle Option, Delay On Timer Option Screw
RS Stock No. 829-8842
Mfr. Part No.92960RS
BrandXpelair
$124.73
Each
units
Extraction 54 m³/h, 76 m³/h 15 dB(A), 29 dB(A) Ceiling Mounted, Wall Mounted - 180 x 180mm 131mm 180mm 180mm Square Simply Silent Intermittent -
RS Stock No. 829-8832
Mfr. Part No.92961AW
BrandXpelair
$93.20
Each
units
Extraction 54 m³/h, 76 m³/h 15 dB(A), 29 dB(A) Ceiling Mounted, Panel Mounted, Wall Mounted, Window Mounted 200mm 200 (Dia)mm 131mm - - Round Simply Silent - -
RS Stock No. 272-766
Mfr. Part No.TX12WW
BrandVent-Axia
$1,158.21
Each
units
Extraction, Intake 1615m³/h 48dB(A) Window Mounted - 378 x 381mm 177mm 378mm 381mm Square - - -
RS Stock No. 124-5317
Mfr. Part No.C6TS
BrandXpelair
$163.61
Each
units
Extraction 194 → 217m³/h 41 → 44 dBA @ 3m Ceiling Mounted, Panel Mounted, Wall Mounted, Window Mounted - 228 x 228mm 143mm 228mm 228mm Square C6 Ceiling, Ghost Air Movement Technology, Knock-Out Section for Side Entry Wiring, Panel & Window Fitting, Sleek Design with Interchangeable, Suitable for Wall -
RS Stock No. 829-8860
Mfr. Part No.CV4R
BrandXpelair
$244.35
Each
units
Extraction 54 m³/h, 76 m³/h 15 dB(A), 29 dB(A) Ceiling Mounted, Panel Mounted, Wall Mounted, Window Mounted 200mm 200 (Dia)mm 131mm - - Round Simply Silent Constant Volume -
RS Stock No. 136-9965
Mfr. Part No.Lo-Carbon TX12WW wireless
BrandVent-Axia
$1,726.76
Each
units
Extraction, Intake 1295 (Medium) m³/h, 1550 (High) m³/h, 660 (Low) m³/h 46dB Ceiling Mounted, Wall Mounted - 378 x 381mm 218mm 378mm 381mm Rectangular T-Series Easy Fit Connector Top Socket Standard on all Models, Long Life Lo-Carbon Motor Lasts Twice as Long as Conventional Motors, Reduces Your Carbon Footprint, Up to 70% Energy Saving, Wired or Wireless Fan Models Available Screw
RS Stock No. 272-176
Mfr. Part No.TX9WL
BrandVent-Axia
$1,194.68
Each
units
Extraction, Intake 870m³/h 43dB(A) Wall Mounted - 388 x 391mm 315mm 388mm 391mm Square - - -
Related Products
High performance extract/intake fans for use in single ...
Description:
High performance extract/intake fans for use in single and double glazing, and most types of materials up to 32mm thick. A unique speed control pack enables high, medium or low speeds to be preset to suit room size or specific ...
High performance intake/extract fans incorporating a speed control ...
Description:
High performance intake/extract fans incorporating a speed control pack which enables high, medium or low speeds to be preset to suit room size or specific requirements. Can be mounted at any angle. Low density 5 blade impeller. Operating temperature range ...
Round, easy to install, intake/extract fans with a ...
Description:
Round, easy to install, intake/extract fans with a spigot and ring fixing method which provides a watertight joint with most types of glazing. Thermal overload protected motor which will run at any angle. Low noise, low density, 5 blade impeller. ...
Low profile fans with integral switch for intake, ...
Description:
Low profile fans with integral switch for intake, extract or external controller modes. Maintenance free motor with thermal protection. Motor isolated when the cover is removed. Silent shutter operation via thermal wax actuator. Snap-fit cover for easy cleaning. Suitable for ...