Indicator Lampholders

Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.


What are indicator lampholders used for?

Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

Types of indicator lampholders

Indicator lampholders are categorised in terms of their different attributes, including:

  • Mounting types, such as PCB (printed circuit board) or panel mount.
  • Termination types, such as soldered, wire lead or screwed.
  • Base formats, such as bayonet, screw in, candelabra or wedged.

...
Read more Read less

Filters

Viewing 1 - 20 of 56 products
Results per page
Description Price Lampholder Type Lamp Type Lamp Base Termination Type Diameter Length Lamp Size Panel Hole Diameter Panel Thickness Mounting Type Series Voltage Rating
RS Stock No. 589-783
BrandRS PRO
$3.284
Each (In a Pack of 5)
units
Panel Mount - BA9 - 17.7mm 19 mm - 14.5mm - Panel Mount PE12 150 V
RS Stock No. 589-777
BrandRS PRO
$1.866
Each (In a Pack of 5)
units
Panel Mount - E10 - 17.7mm 13.25 mm - 14.5mm - Panel Mount PE12 150 V
RS Stock No. 438-9515
BrandRS PRO
$3.79
Each
units
- - BA9 Solder Tag 10.3mm 20 mm - - - - - -
RS Stock No. 811-715
BrandRS PRO
$1.512
Each (In a Pack of 5)
units
PCB Mount - Wedge Solder Tag 5mm 14 mm T1 - 1.5mm - - -
RS Stock No. 206-536
BrandRS PRO
$0.824
Each (In a Pack of 5)
units
- LED BA9s, E10 - 10mm 42 mm 10 mm - - - - -
RS Stock No. 811-664
BrandRS PRO
$1.508
Each (In a Pack of 5)
units
PCB Mount - Wedge - - 12 mm - - - - - -
RS Stock No. 811-642
BrandRS PRO
$1.49
Each (In a Pack of 5)
units
PCB Mount - Wedge PCB Pin 10mm 14.5 mm T3 1/4 - - - - -
RS Stock No. 210-793
BrandRS PRO
$1.606
Each (In a Pack of 5)
units
- LED - - 11mm 21 mm - - - - - -
RS Stock No. 171-2596
Mfr. Part No.OR1206
BrandOrbitec
$1.45
Each (In a Pack of 10)
units
PCB Mount - BA9s PCB Pin - - - - - PCB Mount 0664 -
RS Stock No. 473-0159
Mfr. Part No.095-0410-09-303
BrandDialight
$34.23
Each
units
- - - - - - - - - - - -
RS Stock No. 705-9920
Mfr. Part No.2910F-42
$0.731
Each (In a Pack of 10)
units
- - - - - - - - - - - -
RS Stock No. 237-0569
Mfr. Part No.A1050OAAAC
$6.34
Each
units
Panel Mount LED Screw In Wire Leads 10mm 17.9 mm 5 mm 8mm 7mm - - -
RS Stock No. 168-3918
Mfr. Part No.2910F-42
$0.826
Each (In a Bag of 100)
units
- - - - - - - - - - - -
RS Stock No. 237-0575
Mfr. Part No.A1050OAAAD
$6.16
Each
units
Panel Mount LED Screw In Wire Leads 10mm 17.9 mm 5 mm 8mm 7mm - - -
RS Stock No. 565-153
Mfr. Part No.T0063AOFAA
$3.33
Each
units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - -
RS Stock No. 237-0519
Mfr. Part No.A104800AAC
$3.81
Each
units
Panel Mount LED Screw In Wire Leads 9.5mm 14.5 mm 5 mm 8 5.5mm - - -
RS Stock No. 237-0547
Mfr. Part No.A105000AAB
$4.50
Each
units
Panel Mount LED Screw In Wire Leads 10mm 16.9 mm 5 mm 8mm 7mm - - -
RS Stock No. 213-4717
Mfr. Part No.102RSJ00000000
BrandSloan
$21.13
Each
units
Panel Mount LED Midget Flange Solder Tag 8.2mm - - - - - - -
RS Stock No. 171-2603
Mfr. Part No.OR1208
BrandOrbitec
$5.524
Each (In a Box of 10)
units
- - E10 - - - - - - Screw Mount 0668 -
RS Stock No. 237-0525
Mfr. Part No.A1048OAAAC
$4.26
Each
units
Panel Mount LED Screw In Wire Leads 9.5mm 15.5 mm 5 mm 8mm 5.5mm - - -
Related Products
Chromed bezel lampholders, available with flat or domed ...
Description:
Chromed bezel lampholders, available with flat or domed lens. Rear access to lamp. Ratings: Max. voltage between contacts, 150V; max. voltage between contacts and case 500V; max. Compatible with all our transformer indicator lampholders except BA9s typesØ28.5mm chromed brass bezel5mm ...
Range of illuminated panel-mounted switches available in square, ...
Description:
Range of illuminated panel-mounted switches available in square, rectangular and circular momentary or latching versions. Square or rectangular lamp terminals are also available. Suitable lamps: T5·5, see the Optoelectronics / Indicators section. Panel mounting switches in modular format Separate Lenses, ...
Square or rectangular switches and matching indicators with ...
Description:
Square or rectangular switches and matching indicators with 110 (0.110in) terminals. Illumination is by 6mm wedge bulbs, square types have one lamp circuit, rectangular have twoDPDT momentary or latching action. Illuminated or non-illuminated. Integral lamp puller for easy removal of ...
X=Bezel chrome finish. 0=satin, 1=black, 2=matt Electrical & ...
Description:
X=Bezel chrome finish. 0=satin, 1=black, 2=matt Electrical & optical data are measured at an ambient temperature of 25°C Luminous intensity at DC Storage temperature -25 °C to +80°C Application temperature -20 °C to +60°C Due to component tolerances, colour temperature ...