Ceiling Lights

A ceiling light is an electrical fitting containing a lamp or light bulb to provide an artificial light source in a room. Ensuring a workplace has adequate illumination is essential for employee health and safety. Substandard or insufficient lighting can lead to various complaints including eye-strain, headaches and fatigue. On the opposite end of the scale, too much light can also cause the same problems. Both can result in quality issues, low productivity and sometimes accidents can occur.


What ceiling light is best for me?


There are various types of ceiling fixture available, choosing the best one for an installation depends on a few key factors.


  • Natural light: Make the best use of existing natural light. Ensure that all windows and skylights are kept clean to allow as much natural light is utilised.

  • Application: Make sure that the correct type of ceiling lighting is installed for the job at hand. An office environment requires different lighting to a clothing factory containing sewing machines and fabric matching tables.

  • Positioning: Care must be taken when installing ceiling lighting. The correct positioning of lighting ensures that employees can safely carry out their daily tasks and not put themselves under any unnecessary strains.

  • Environment: Must ceiling light be Anti-corrosive or IP44 rated or above.

Whether you are installing office lighting, garage lighting, LED or fluorescent, industrial ceiling lights are the most likely. Some additional points to consider are;


Mounting type


  • Recessed or flush ceiling light: Enables the lamp to be mounted flush into the ceiling.

  • Surface mount: A simple way of fixing single or twin batten fluorescent or LED fixtures to the ceiling.

  • Pendant: A type of fitting that suspends the lamp a short distance from the ceiling.

  • Dimmable: Must the lighting be dimmable? If so extra ballasts and switching components must be used.

  • Diffusers: Used to spread and soften the light.

Colour Temperature


Colour temperature refers to a scale that measures the type of colour or hue that a lamp emits. The colour temperature scale is measured in Kelvins (K). The higher the K number the cooler the lamp. The lower the K number the warmer the lamp.


  • 2500K Extra warm white.

  • 2700K Warm white.

  • 3000K Warm white / White.

  • 3500K White.

  • 4000K Cool white.

  • 6500K Daylight.

...
Read more Read less

Filters

Viewing 1 - 20 of 114 products
Results per page
Description Price Type Length Width Depth Wattage Number of Lamps Colour Tone Lamp Type Colour Temperature Lamp Size Life Hours Colour Reference Voltage Rating Anti-corrosive
RS Stock No. 922-1483
Mfr. Part No.LEDBAT10
$53.27
Each
units
Batten 605 mm 30 mm 45 mm 10 W - Cool White LED 4000K T5, T8 - - 230 V -
RS Stock No. 851-3037
BrandRS PRO
$47.63
Each
units
Twin Batten 1.175 m 63 mm - 56 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 851-3052
BrandRS PRO
$39.17
Each (In a Pack of 2)
units
Diffuser 1219 mm - - - 1 - Fluorescent - T5 - - - No
RS Stock No. 851-3002
BrandRS PRO
$23.51
Each
units
Single Batten 575 mm 63 mm - 14 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 122-3542
Mfr. Part No.4058075000506
BrandLEDVANCE
$165.91
Each
units
- 600 mm 600 mm 10.5 mm 30 W 1 Cool White - 4000K - - - 230 V -
RS Stock No. 122-3553
Mfr. Part No.4058075000728
BrandLEDVANCE
$212.97
Each
units
- 625 mm 625 mm 10.5 mm 33 W 1 Cool White - 4000K - - - 230 V -
RS Stock No. 820-3020
Mfr. Part No.910500453336
$198.92
Each
units
LED Module 1.223 m 1.223 m 96 mm 23 W 1 Cool White LED 4000K - - - 220 → 240 V -
RS Stock No. 122-3551
Mfr. Part No.4058075000704
BrandLEDVANCE
$166.25
Each
units
- 620 mm 620 mm 10.5 mm 40 W 1 Cool White - 4000K - - - 230 V -
RS Stock No. 125-6916
BrandRS PRO
$79.40
Each
units
Twin Batten 615 mm 95 mm 85 mm 20 W - - LED - T8 - - 230 V ac -
RS Stock No. 851-2933
BrandRS PRO
$40.18
Each
units
Twin Batten 610 mm 104 mm 75 mm 28 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 820-3024
Mfr. Part No.910500453338
$263.28
Each
units
LED Module 1.223 m 1.223 m 96 mm 41 W 1 Cool White LED 4000K - - - 220 → 240 V -
RS Stock No. 122-7973
Mfr. Part No.910500453336
$142.37
Each
units
Single Batten 1.223 m 87 mm 96 mm 20 W 1 Cool White LED 4000K - - - 240 V -
RS Stock No. 851-3034
BrandRS PRO
$53.33
Each
units
Twin Batten 1.475 m 63 mm - 70 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 851-3059
BrandRS PRO
$27.43
Each (In a Pack of 2)
units
Diffuser 610 mm - - - 1 - Fluorescent - T5 - - - -
RS Stock No. 122-3578
Mfr. Part No.4058075000940
BrandLEDVANCE
$153.93
Each
units
Batten 1.5 m 95 mm - 30 W 1 Cool White LED 4000K - - - 230 V -
RS Stock No. 851-3056
BrandRS PRO
$54.395
Each (In a Pack of 2)
units
Diffuser 1524 mm - - - 1 - Fluorescent - T5 - - - No
RS Stock No. 851-2930
BrandRS PRO
$145.89
Each
units
Twin Batten 1.51 m 104 mm 75 mm 70 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 122-3580
Mfr. Part No.4058075079953
BrandLEDVANCE
$156.22
Each
units
Batten 1.5 m 95 mm - 55 W 1 Cool White LED 4000K - - - 230 V -
RS Stock No. 122-7975
Mfr. Part No.910500453338
$199.84
Each
units
Single Batten 1.223 m 87 mm 96 mm 35.5 W 1 Cool White LED 4000K - - - 240 V -
RS Stock No. 179-4170
Mfr. Part No.ECLAC22L
BrandABB
$87.07
Each
units
- - 325 Dia. mm 85 mm 26.5 W 1 - LED 4000K - 50000h 840 3.6 V -
Related Products
The introduction of this LED panel is part ...
Description:
The introduction of this LED panel is part of the Ledvance luminaire family providing greater efficiency through integrated LED lighting. The LED panel is the ideal upgrade of existing fluorescent installations. Greater energy savings and low maintenance costs with an ...
The introduction of this damp proof LED luminaire ...
Description:
The introduction of this damp proof LED luminaire is part of the Ledvance luminaire family providing greater efficiency with a contemporary modern look. This luminaire is the ideal upgrade of existing fluorescent installations. Greater energy savings and low maintenance costs ...
This RS Pro linear LED batten boasts an ...
Description:
This RS Pro linear LED batten boasts an ultra-low profile, with a high lumen output. Manufactured from an impact resistant Aluminium body and Polycarbonate diffuser creates this batten as a versatile lightweight and robust light fixture. The surface-mounted LED linear ...
BAT PK 3C SIDE B SIDE BKT NICD. ...
Description:
BAT PK 3C SIDE B SIDE BKT NICD. FeaturesAC/EM unit3 year warrantyTypically 4,500 lumens on mains AC operation, 350 lumens in emergency operationCeiling, wall mount or suspension mounting (wall mount requires optional 45o mounting brackets)Higher wall mount classification using optional ...