Surface Mount Fixed Resistors

Resistors are referred to as a Passive Component. Surface Mount Resistors are more commonly known as SMD (surface mount device) or SMT (Surface mount technology) Resistors. These resistors offer advantages in space saving on Printed Circuit Boards (PCB’s).


Some common package sizes are 0201,0402,0603,0805,1206,1210,2020,2512


SMD Resistors are used in large volumes and are the preferred choice in electronics equipment due to their small size and high reliability. SMD resistors are particularly used in telecommunication, automotive (AEC Q200 qualified) and medical equipment, they also found in personal devices, displays and advanced technology research instruments.


SMD Fixed Resistors


Surface mount fixed resistors are the most widely used resistors as they reduce the flow of the electrical current in circuits. Similar to water flowing along a pipe, the tap controls the flow of water, a resistor controls the flow of current. They work to a fixed value the resistance does not change in temperature or voltage. The most commonly used fixed resistors values are 100KΩ,10kΩ,100Ω, 10Ω


Types of surface mount fixed resistors


  • Thin Film Resistors have a higher precision than the thick film

  • Thick Film Resistors are used for general use due to a lower price point.

  • Moulded Wirewound Resistors offer higher power

  • Foil Resistors for ultra-high precision and really low-Temperature coefficient of resistance

  • Shunts (current sense) Low ohmic values for where current measurement is critical

  • Melf (cylindrical) offering superb pulse load capability

What are surface mount fixed resistors used for?


SMD fixed resistors are very compact and used in most electronic board design. Due to their compact size and the continuous development of ever smaller footprints, this has allowed for the development of ever smaller PCB designs and the ability to get more from the board. The resistors can assist in the reduction of component count on the board.


High Power / Surge / pulse protection


Many manufacturers offer a higher power alternative for the various packages they have available. As an example the 0603 resistor package can vary from 0.1W to 0.25W (rated dissipation 70°C). The higher power alternatives can be used in applications where there is a need to protect against surges / pulses.


What is the difference between Thin Film Resistors and Thick Film Resistors?


The main difference being that the thick film resistors have a paste fired on to the manufacturers chosen substrate. Thin film resistors as the name suggests has an extremely thin metal film that is generally vacuum deposited on to the manufacturers chosen substrate.


...
Read more Read less

Filters

Viewing 1 - 20 of 30941 products
Results per page
Description Price Resistance Package/Case Technology Tolerance Power Rating Temperature Coefficient Automotive Standard Dimensions Length Depth Height Series Minimum Operating Temperature Maximum Operating Temperature
RS Stock No. 804-8921
BrandRS PRO
$0.004
Each (On a Reel of 5000)
units
10kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-8980
BrandRS PRO
$0.002
Each (On a Reel of 5000)
units
56kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-8915
BrandRS PRO
$0.003
Each (On a Reel of 5000)
units
6.8kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 802-9595
BrandRS PRO
$0.005
Each (On a Reel of 5000)
units
620Ω 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 716-9743
BrandRS PRO
$0.016
Each (On a Reel of 5000)
units
0603 (1608M) Thick Film ±5% 0.1W ±200ppm/°C - - - - - RS -55°C +155°C
RS Stock No. 804-8681
BrandRS PRO
$0.003
Each (On a Reel of 5000)
units
10Ω 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 802-9551
BrandRS PRO
$0.007
Each (On a Reel of 5000)
units
220Ω 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-8760
BrandRS PRO
$0.003
Each (On a Reel of 5000)
units
100Ω 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 713-1280
BrandRS PRO
$0.014
Each (On a Reel of 5000)
units
47Ω 1206 (3216M) Thick Film ±5% 0.25W ±200ppm/°C - - - - - RS -55°C +155°C
RS Stock No. 713-6976
BrandRS PRO
$0.009
Each (On a Reel of 5000)
units
2.7kΩ 0805 (2012M) Thick Film ±5% 0.125W ±200ppm/°C - - - - - RS -55°C +155°C
RS Stock No. 804-6486
BrandRS PRO
$0.005
Each (On a Reel of 5000)
units
2.7kΩ 0805 (2012M) Thick Film ±1% 0.125W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 716-8475
BrandRS PRO
$0.003
Each (On a Reel of 10000)
units
60.4Ω 0402 (1005M) Thick Film ±1% 0.063W ±100ppm/°C - - - - - RS -55°C +155°C
RS Stock No. 713-4084
BrandRS PRO
$0.007
Each (On a Reel of 5000)
units
33Ω 0603 (1608M) Thick Film ±5% 0.1W ±200ppm/°C - - - - - RS -55°C +155°C
RS Stock No. 804-8791
BrandRS PRO
$0.003
Each (On a Reel of 5000)
units
220Ω 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-9038
BrandRS PRO
$0.003
Each (On a Reel of 5000)
units
270kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 804-9034
BrandRS PRO
$0.003
Each (On a Reel of 5000)
units
220kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 713-1322
BrandRS PRO
$0.005
Each (On a Reel of 5000)
units
180Ω 1206 (3216M) Thick Film ±5% 0.25W ±200ppm/°C - - - - - RS -55°C +155°C
RS Stock No. 804-7158
BrandRS PRO
$0.002
Each (On a Reel of 10000)
units
1kΩ 0402 (1005M) Thick Film ±1% 0.063W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 713-4065
BrandRS PRO
$0.006
Each (On a Reel of 5000)
units
6.8Ω 0603 (1608M) Thick Film ±5% 0.1W ±200ppm/°C - - - - - RS -55°C +155°C
RS Stock No. 717-1402
BrandRS PRO
$0.002
Each (On a Reel of 5000)
units
280kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - RS -55°C +155°C
Related Products
The Vishay RH010 series wirewound chassis mount resistor ...
Description:
The Vishay RH010 series wirewound chassis mount resistor has a complete welded and moulded construction for total environmental protection in aluminium housing. These resistors mount directly onto a chassis to utilize heat-sink effect. This range of wirewound resistors offers high ...
SMR3DZ series ultra high precision Z-Foil molded surface ...
Description:
SMR3DZ series ultra high precision Z-Foil molded surface mount resistors with proven reliability and advanced level of stability. The SMR3DZ series are small in size and have excellent stability under different environmental conditions. Applications for the SMR3DZ series include: Precision ...
The CRG0805 range of SMD fixed resistors come ...
Description:
The CRG0805 range of SMD fixed resistors come from the TE Connectivity CRG series. They are all house in a 0805 industry standard package size. The CRG0805 devices range from 1 ohm to 10M and tolerances of 1% and 5%. ...
The TE Connectivity RL73 Series is a low ...
Description:
The TE Connectivity RL73 Series is a low ohmic shunt resistor that acts as a current sensor. Designed with a special metal glaze resistive element, it has a nickel barrier layer beneath the solder to prolong terminal life. Applications for ...