Breadboards

A breadboard is a solderless plugboard that is reusable and used for prototyping in electronics. The fact that it is solderless allows it to be used for creating temporary prototypes and circuit designs.

Layout of a Breadboard
Terminal strips are the main areas which hold most of the electronic components. The metal strips at the bottom of the breadboard have clips which allow you to hold a component in place once inserted into the holes. The wire or component is then electrically connected to anything else that is in that row.
Power rails (also known as bus strips) are metal strips that run in the opposite direction to the terminal strips giving you easy access to power wherever it is required in the circuit.
The ravine in the centre of a breadboard is used for DIP integrated circuits.

Uses of breadboards
Due to a breadboards prototyping capabilities, they are popular with students who use them to create simple or complex circuits.
Manufacturers also use breadboards to test out new parts so that they do not have to solder connections each time they test a new design. It gives them the ability to build, test then analyse the results.

...
Read more Read less

Filters

Viewing 1 - 20 of 58 products
Results per page
Description Price Type Length Width Height Dimensions Input Voltage DIP Capacity
RS Stock No. 102-9147
BrandRS PRO
$23.35
Each
units
Prototyping Board 80mm 60mm 10mm 80 x 60 x 10mm - -
RS Stock No. 210-4542
BrandRS PRO
$45.51
Each
units
Prototyping Board 201mm 64mm 18.5mm 201 x 64 x 18.5mm - -
RS Stock No. 102-9169
BrandRS PRO
$82.74
Each
units
Prototyping Board 240mm 195mm 21mm 240 x 195 x 21mm - -
RS Stock No. 835-2712
BrandRS PRO
$17.74
Each
units
Power Block 81mm 30mm 19mm 81 x 30 x 19mm - -
RS Stock No. 159-6209
BrandRS PRO
$56.95
Each
units
Prototyping Board 203.3mm 194.31mm 1.6mm 203.3 x 194.31 x 1.6mm - -
RS Stock No. 835-2725
BrandRS PRO
$75.15
Each
units
Prototyping Solderless Breadboard 266mm 168mm 24mm 266 x 168 x 24mm - -
RS Stock No. 159-6192
BrandRS PRO
$62.59
Each
units
Prototyping Board 114.3mm 156.21mm 1.6mm 114.3 x 156.21 x 1.6mm - -
RS Stock No. 835-2716
BrandRS PRO
$48.28
Each
units
Prototyping Solderless Breadboard 83mm 147mm 19mm 83 x 147 x 19mm - -
RS Stock No. 100-4081
Mfr. Part No.01-0021
$13.35
Each
units
Prototyping Board 121.92mm 101.6mm - 121.92 x 101.6mm - -
RS Stock No. 124-5457
Mfr. Part No.1377
$9.57
Each
units
SMT Breakout PCB - - - - - 48
RS Stock No. 634-8875
Mfr. Part No.SRH-5X2
BrandSunhayato
$9.89
Each
units
Prototyping Board 13mm 173mm 9mm 13 x 173 x 9mm - -
RS Stock No. 124-5515
Mfr. Part No.2884
$8.54
Each
units
Prototyping Board 50.9mm 22.9mm 1.6mm 50.9 x 22.9 x 1.6mm 3.3 V 32
RS Stock No. 897-1632
Mfr. Part No.RE942-S1
$4.71
Each
units
Solderable Breadboard With Adaption Circuit Board 31.75mm 24.76mm 1.5mm 31.75 x 24.76 x 1.5mm - -
RS Stock No. 124-5499
Mfr. Part No.2890
$12.21
Each
units
Prototyping Board 50.9mm 47mm 1.6mm 50.9 x 47 x 1.6mm 3.3 V -
RS Stock No. 453-8846
Mfr. Part No.SAD-12
BrandSunhayato
$86.47
Each
units
Prototyping Board 168mm 184mm 24mm 168 x 184 x 24mm - -
RS Stock No. 433-955
Mfr. Part No.01-3942
$38.05
Each
units
Prototyping Board 102mm 95.5mm 1.6mm 102 x 95.5 x 1.6mm - -
RS Stock No. 634-8847
Mfr. Part No.SRH-10
BrandSunhayato
$21.65
Each
units
Prototyping Board 39mm 173mm 9mm 39 x 173 x 9mm - -
RS Stock No. 897-1672
Mfr. Part No.RE945-S3
$9.59
Each
units
Solderable Breadboard With Adaption Circuit Board 88.26mm 54.61mm 1.5mm 88.26 x 54.61 x 1.5mm - -
RS Stock No. 634-7822
Mfr. Part No.SAD-11
BrandSunhayato
$49.31
Each
units
Prototyping Board 83mm 147mm 16mm 83 x 147 x 16mm - -
RS Stock No. 897-1654
Mfr. Part No.RE944-S1
$5.15
Each
units
Solderable Breadboard With Adaption Circuit Board 42.54mm 31.75mm 1.5mm 42.54 x 31.75 x 1.5mm - -
Related Products
Breadboard jumper wire kit for easy and accurate ...
Description:
Breadboard jumper wire kit for easy and accurate wiringSKS-290 uses high-grade jumper wires with nickel pins on both ends, allowing for easy bendingSKS-350 features phosphor bronze, nickel-plated PVC cladding, supporting inch pitches and direct contact with board.
Copper tracks and pads on a 0.1 in ...
Description:
Copper tracks and pads on a 0.1 in (2.54mm) pitch d.i.l. packages. Board holes 1.0mm (0.040 in). The component side has additional copper tracks for supply rails, etc. Drilling position marked for easy fitting of racking Card Handles or Card ...
3M 300 series solderless breadboards incorporate state-of-the-art techniques ...
Description:
3M 300 series solderless breadboards incorporate state-of-the-art techniques to yield a circuit building system with unparalleled flexibility and reliability. A voltage distribution system is integrated with the basic component breadboard matrix. 5-way binding posts provide the interface for connections from ...
Adaption circuit board for 14-pin sockets with a ...
Description:
Adaption circuit board for 14-pin sockets with a distance of 7.62 mm. Epoxy fibre-glass FR4 1.50 mm. Double-sided 35 μm Cu. Plated through holes (PTH)Hot air leveling (HAL leadfree)Solder stop mask. Hole spacing 2.54 mm4 three-hole-pads and 2 x 4 ...