Brass & Copper Solder Fittings

Brass and copper solder fittings are pre-soldered fittings used predominantly in plumbing systems to connect copper pipes.

How do brass and copper solder fittings work?

Brass and copper solder fittings use the principle of capillary action to ensure that, when correctly joined to copper tube, a sufficient layer of lead-free solder is present between tube and fittings to form a mechanically strong, leak proof joint without the need for external solder application. Both the pipes and the fitting should be cleaned with wire wool before use. You can then slide the pipes into the fitting, ensuring that they're pushed all the way in, and apply heat to the rings of solder (indicated by ridges on the outside of the fitting) to secure the joint.

What are brass and copper solder fittings used for?

These fittings can be used to help convey drinking water, light mineral oils, natural or liquid petroleum gases or compressed air. They come in straight, elbow, T-shaped and reducer configurations, depending on your needs.


...
Read more Read less

Filters

Viewing 1 - 5 of 5 products
Results per page
Description Price Fitting Direction Fitting Type Compatible Pipe Size Material Solder Type
RS Stock No. 797-079
Mfr. Part No.TP1215
$1.21
Each (In a Pack of 25)
units
90° Elbow 15 x 15mm Copper Solder Ring
RS Stock No. 797-114
Mfr. Part No.TP2415
$2.564
Each (In a Pack of 10)
units
- Equal Tee 15 x 15 x 15mm Copper Solder Ring
RS Stock No. 797-007
Mfr. Part No.TP0115
$0.748
Each (In a Pack of 25)
units
Straight Coupler 15 x 15mm Copper Solder Ring
RS Stock No. 796-212
Mfr. Part No.TP01R2815
$10.155
Each (In a Pack of 2)
units
Straight Reducer Coupler 28 x 15mm Copper Solder Ring
RS Stock No. 797-085
Mfr. Part No.TP1222
$2.68
Each (In a Pack of 10)
units
90° Elbow 22 x 22mm Copper Solder Ring
Related Products
Male brass thread to plastic push-in connector:. Suitable ...
Description:
Male brass thread to plastic push-in connector:. Suitable for central heating systems. Push-fit and demountable connections Corrosion free No scale build upBSI and WRAS approved.
Enhanced performance demountable DZR brass fittings. Features a ...
Description:
Enhanced performance demountable DZR brass fittings. Features a stainless steel grab ring. Suitable for use with copper or plastic tube. For use in the mechanical services sector on hot and cold water applications. Provides electrical continuity.
The Shark. Bite Push-Fit Solution is a quick ...
Description:
The Shark. Bite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints.
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. No need to prepare threaded ...