Hydraulic Blanking Plugs

Hydraulic blanking plugs provide a temporary or permanent way of covering holes in high-pressure hydraulic devices. By sealing holes you can help to prevent leaks and ensure the device operates properly. Depending on their material, hydraulic blanking plugs are resistant to corrosion, oil and most chemicals. They have a threaded shaft and a flat head with a washer.

What are hydraulic blanking plugs used for?

Hydraulic blanking plugs are used in high pressure fluid applications such as presses, pumps, cylinders, valves, relays, motors, transmissions and turbos. Any blow-off or fault is prevented with a visible hydraulic bite rings on the progressive ring. Stress is evenly distributed throughout which minimises concentration at the bite point.

How to choose the right hydraulic blanking plugs

Hydraulic systems work at high pressures, applying extreme load and vibration to fittings. When choosing the right hydraulic blanking plugs, the technical specifications should be carefully considered. These factors include maximum temperature and pressure, as well as material. Steel hydraulic blanking plugs have a high resistance to corrosion, and plastic plugs are solvent, oil, grease and chemical resistant.


...
Read more Read less

Filters

Viewing 1 - 20 of 34 products
Results per page
Description Price Material Finish Head Hex Type Thread Length Overall Length Thread Standard Thread Size Maximum Operating Temperature Minimum Operating Temperature Maximum Operating Pressure
RS Stock No. 283-3363
Mfr. Part No.59821
$28.05
Each
units
Aluminium Matte Anodised - 12mm 20mm G 3/4in +130°C -30°C -
RS Stock No. 727-749
Mfr. Part No.VSTI3/8EDCF
BrandParker
$7.83
Each (In a Pack of 5)
units
Steel Zinc Plated - 12mm 17.3mm G 3/8in +100°C -30°C 400 bar
RS Stock No. 914-9482
Mfr. Part No.58411
$6.25
Each
units
Polyamide Based Technopolymer Matte - 14mm 24mm G 1-1/4in +100°C -30°C -
RS Stock No. 283-3420
Mfr. Part No.58298
$2.95
Each (In a Pack of 5)
units
Glass Fibre Reinforced Plastic (GRP) Matte - 12mm 20mm G 3/4in +130°C -30°C -
RS Stock No. 871-2269
Mfr. Part No.VSTI16x1.5EDCF
BrandParker
$10.51
Each
units
Steel Zinc Plated Hollow Hex 12mm 17mm Metric - - - 400 bar
RS Stock No. 283-3335
Mfr. Part No.59801
$20.52
Each
units
Aluminium Matte Anodised - 9mm 15.5mm G 3/8in +130°C -30°C -
RS Stock No. 914-9501
Mfr. Part No.59727
$20.96
Each
units
Aluminium Black Anodised - 11.5mm 44mm G 3/4in +100°C -30°C -
RS Stock No. 283-3313
Mfr. Part No.58641
$3.852
Each (In a Pack of 5)
units
Glass Fibre Reinforced Plastic (GRP) Matte - 13mm 22mm G 1in +130°C -30°C -
RS Stock No. 914-9494
Mfr. Part No.59721
$10.67
Each
units
Aluminium Black Anodised - 9mm 37.5mm G 1/4in +100°C -30°C -
RS Stock No. 283-3357
Mfr. Part No.59811
$17.95
Each
units
Aluminium Matte Anodised - 11mm 18mm G 1/2in +130°C -30°C -
RS Stock No. 871-2253
Mfr. Part No.VSTI10X1EDCF
BrandParker
$6.22
Each
units
Steel Zinc Plated Hollow Hex 8mm 12mm Metric - - - 400 bar
RS Stock No. 871-2265
Mfr. Part No.VSTI14x1.5EDCF
BrandParker
$8.39
Each
units
Steel Zinc Plated Hollow Hex 12mm 17mm Metric - - - 400 bar
RS Stock No. 283-3391
Mfr. Part No.58296
$1.944
Each (In a Pack of 5)
units
Glass Fibre Reinforced Plastic (GRP) Matte - 9mm 16mm G 3/8in +130°C -30°C -
RS Stock No. 283-3290
Mfr. Part No.58621
$2.036
Each (In a Pack of 5)
units
Glass Fibre Reinforced Plastic (GRP) Matte - 11mm 18mm G 1/2in +130°C -30°C -
RS Stock No. 283-3379
Mfr. Part No.58294
$1.944
Each (In a Pack of 5)
units
Glass Fibre Reinforced Plastic (GRP) Matte - 9mm 16mm G 1/8in +130°C -30°C -
RS Stock No. 498-312
Mfr. Part No.6PNK4S
BrandParker
$5.276
Each (In a Pack of 5)
units
Steel Yellow Chromated, Zinc Plated Hex Plug - - G 3/8in +120°C -40°C 380 bar
RS Stock No. 914-9505
Mfr. Part No.59729
$18.14
Each
units
Aluminium Black Anodised - 11.5mm 44mm G 1in +100°C -30°C -
RS Stock No. 283-3329
Mfr. Part No.59791
$20.38
Each
units
Aluminium Matte Anodised - 9mm 15.5mm G 1/4in +130°C -30°C -
RS Stock No. 914-9498
Mfr. Part No.59723
$13.90
Each
units
Aluminium Black Anodised - 9mm 38.5mm G 3/8in +100°C -30°C -
RS Stock No. 283-3307
Mfr. Part No.58631
$3.166
Each (In a Pack of 5)
units
Glass Fibre Reinforced Plastic (GRP) Matte - 12mm 20mm G 3/4in +130°C -30°C -
Related Products
Hexagon headed male parallel thread blanking plug. Manufactured ...
Description:
Hexagon headed male parallel thread blanking plug. Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 ...
Blanking plugs for ports, male metric thread. Manufactured ...
Description:
Blanking plugs for ports, male metric thread. Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 ...
Made from glass-fibre reinforced technopolymerNBR synthetic rubber seals. ...
Description:
Made from glass-fibre reinforced technopolymerNBR synthetic rubber seals. Solvent, oil, grease, chemical resistant. Maximum working temperature 130°CGraphic function symbol on plug cap.
Made from glass-fibre reinforced technopolymerNBR synthetic rubber seals. ...
Description:
Made from glass-fibre reinforced technopolymerNBR synthetic rubber seals. Solvent, oil, grease, chemical resistant. Maximum working temperature 130°CGraphic function symbol on plug cap.