Hydraulic Manifolds

Hydraulic manifolds help to regulate fluid flow between the components of a hydraulic system. 

 

What are hydraulic manifolds used for?

A hydraulic manifold allows you to manually regulate the amount of fluid flow between parts of hydraulic machinery using levers or switches. They act like the switchboard of an electrical circuit in that they allow the operator to control the transfer of power between the components of the system, like pumps and actuators. 


A manifold consists of an array of hydraulic valves connected to each other. This structure allows for the combined interaction of these valves in the hydraulic manifold, which enables complex control functionalities to intensify fluid flow and increase the level of pressure, and vice versa. 


Types of hydraulic manifolds

Hydraulic manifolds have either a single-piece design or a modular design and come in cylindrical, hexagonal or block configurations, depending on your needs. The components you use with the manifold depend on the type you select. 


...
Read more Read less

Filters

Viewing 1 - 6 of 6 products
Results per page
Description Price Manufacturer Series Number of Stations Maximum Operating Pressure
RS Stock No. 283-1979
Mfr. Part No.A64
BrandEnerpac
$290.91
Each
units
A 7 700 bar
RS Stock No. 750-2752
Mfr. Part No.AM41
BrandEnerpac
$1,762.09
Each
units
AM 7 700 bar
RS Stock No. 120-839
Mfr. Part No.HM6
BrandHi-Force
$262.29
Each
units
HM 6 700 bar
RS Stock No. 297-4694
Mfr. Part No.R900172222
$666.02
Each
units
- 4 -
RS Stock No. 750-2758
Mfr. Part No.AM21
BrandEnerpac
$819.28
Each
units
AM 5 700 bar
RS Stock No. 283-1424
Mfr. Part No.A66
BrandEnerpac
$228.93
Each
units
A 6 700 bar
Related Products
These CETOP mounting flow control check valves are ...
Description:
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity. Pilot operated ...
A range of CETOP mounting flow control valves ...
Description:
A range of CETOP mounting flow control valves for limiting the flow of hydraulic fluid to actuators. They operate using mineral oils (HL, HLP) to DIN 51 524 with a viscosity range of 10 to 800mm²/s. For vertical stacking assemblies ...
A pilot operated sandwich design check valve from ...
Description:
A pilot operated sandwich design check valve from Parker Hannifin for use with CETOP 03 stackable hydraulic flow valves. The outlet flow is blocked while inlet flow is free. Pressure at the inlet line opens teh check valve and allows ...
The single station gauge isolator valve by Parker ...
Description:
The single station gauge isolator valve by Parker has been designed to prevent pressure gauge damage and extend gauge life.When installed between gauge and pressure line, it protects the pressure gauge from continuous hydraulic pressure, surges or shock loads.Operated by ...