Pneumatic Elbow Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic elbow threaded-to-tube adaptors being one example.

What are pneumatic elbow threaded-to-tube adaptors used for?

Pneumatic elbow threaded-to-tube adaptors are compact adaptors that can connect either single or multiple hoses.

Types of pneumatic elbow threaded-to-tube adaptors

Pneumatic elbow threaded-to-tube adaptors come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 1 - 20 of 665 products
Results per page
Description Price Connection Style Connector A Connector B Connector A - Gender Angle Body Material Connector B - Gender Thread Material Manufacturer Series Swivel Connection Mounting Type Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 299-4109
BrandRS PRO
$3.75
Each (In a Pack of 5)
units
Threaded-to-Tube R 1/4 Push In 6 mm Male 90° - - - 1100 No - 15 bar +70°C -18°C
RS Stock No. 299-4143
BrandRS PRO
$5.594
Each (In a Pack of 5)
units
Threaded-to-Tube G 1/4 Push In 8 mm Male 90° - - - - No - 15 bar +70°C -18°C
RS Stock No. 916-0782
BrandRS PRO
$6.148
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 10 mm Male - Polyoxymethylene - Nickel Plated Brass - No - 10 bar +60°C 0°C
RS Stock No. 299-4115
BrandRS PRO
$3.712
Each (In a Pack of 5)
units
Threaded-to-Tube R 1/8 Push In 6 mm Male 90° - - - 1100 No - 15 bar +70°C -18°C
RS Stock No. 916-0858
BrandRS PRO
$4.513
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 6 mm Male - Polyoxymethylene - Nickel Plated Brass - No - 10 bar +60°C 0°C
RS Stock No. 176-2213
BrandRS PRO
$71.53
Each (In a Pack of 10)
units
Threaded G 1/4 G 1/4 Female 90° Stainless Steel Female - - No - 140 bar +300°C -110°C
RS Stock No. 176-2214
BrandRS PRO
$88.493
Each (In a Pack of 10)
units
Threaded G 3/8 G 3/8 Female 90° Stainless Steel Female - - No - 140 bar +300°C -110°C
RS Stock No. 176-1342
BrandRS PRO
$5.063
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 4 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1413
BrandRS PRO
$5.162
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 4 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-2215
BrandRS PRO
$138.857
Each (In a Pack of 10)
units
Threaded G 1/2 G 1/2 Female 90° Stainless Steel Female - - No - 140 bar +300°C -110°C
RS Stock No. 144-2608
BrandRS PRO
$20.26
1 Bag of 10
Bag(s)
Threaded-to-Tube M5 Push In 4 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 176-1416
BrandRS PRO
$5.589
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 6 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1414
BrandRS PRO
$5.895
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 4 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1350
BrandRS PRO
$5.967
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 8 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1813
BrandRS PRO
$9.332
Each (In a Pack of 10)
units
Threaded-to-Tube R 3/8 Push In 10 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1410
BrandRS PRO
$11.714
Each (In a Pack of 10)
units
Threaded-to-Tube M3 Push In 3 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-0957
BrandRS PRO
$4.794
Each (In a Pack of 10)
units
Threaded-to-Tube R 3/8 Push In 8 mm Male 90° Brass - Brass - No - - - -
RS Stock No. 916-0851
BrandRS PRO
$4.852
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 6 mm Male - Polyoxymethylene - Nickel Plated Brass - No - 10 bar +60°C 0°C
RS Stock No. 176-1337
BrandRS PRO
$5.447
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 8 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1340
BrandRS PRO
$4.626
Each (In a Pack of 10)
units
Threaded-to-Tube M5 Push In 4 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
Related Products
RS Pro push-in fittings made of nickel plated ...
Description:
RS Pro push-in fittings made of nickel plated brass ensure highest quality,reliability and endurance in the pneumatic field. Main advantages:- Quick connection and disconnection- Full Flow and Vacuum resistant tank to special shaped seals- 3 threads available, BSPP, BSPT (universal ...
A range of Tube-to-Thread and Tube-to-Tube adaptors for ...
Description:
A range of Tube-to-Thread and Tube-to-Tube adaptors for push-in pneumatic fittings. Use for nylon, polyamide (PA), polurethane (PU) and Hytrel tubing. Pressure range -750mm Hg to 18 bar (subject to tube type)All tapered threads are pre-coated with non-PTFE thread sealant. ...
SMC’s KQG2 stainless steel range provides engineers with ...
Description:
SMC’s KQG2 stainless steel range provides engineers with a choice of high performance, lightweight, compact push in fittings for when resistance to corrosion, chemicals and high temperatures is vital. 30% smaller and 62% lighter than the existing KQG range and ...
KQ2 one-touch, metric and inch size fittings are ...
Description:
KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release ...