Pneumatic Elbow Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic elbow threaded-to-tube adaptors being one example.

What are pneumatic elbow threaded-to-tube adaptors used for?

Pneumatic elbow threaded-to-tube adaptors are compact adaptors that can connect either single or multiple hoses.

Types of pneumatic elbow threaded-to-tube adaptors

Pneumatic elbow threaded-to-tube adaptors come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 61 - 80 of 665 products
Results per page
Description Price Connection Style Connector A Connector B Connector A - Gender Angle Body Material Connector B - Gender Thread Material Manufacturer Series Swivel Connection Mounting Type Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 176-1809
BrandRS PRO
$13.11
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/2 Push In 12 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-2173
BrandRS PRO
$58.322
Each (In a Pack of 10)
units
Tube-to-Tube Push In 8 mm Push In 8 mm - 90° Stainless Steel - - - No - 20 bar +200°C -15°C
RS Stock No. 176-0954
BrandRS PRO
$3.849
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 8 mm Male 90° Brass - Brass - No - - - -
RS Stock No. 144-2608
BrandRS PRO
$20.26
1 Bag of 10
Bag(s)
Threaded-to-Tube M5 Push In 4 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 176-1417
BrandRS PRO
$6.381
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 6 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1816
BrandRS PRO
$11.466
Each (In a Pack of 10)
units
Threaded-to-Tube R 3/8 Push In 12 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1339
BrandRS PRO
$6.432
Each (In a Pack of 10)
units
Threaded-to-Tube R 3/8 Push In 8 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1414
BrandRS PRO
$5.895
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 4 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-0966
BrandRS PRO
$14.208
Each (In a Pack of 10)
units
Threaded-to-Tube G 1/8 Push In 4 mm Male 90° Brass - Brass - Yes - - - -
RS Stock No. 144-2614
BrandRS PRO
$33.20
1 Bag of 10
Bag(s)
Threaded-to-Tube R 1/8 Push In 8 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 176-1410
BrandRS PRO
$11.714
Each (In a Pack of 10)
units
Threaded-to-Tube M3 Push In 3 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 144-2616
BrandRS PRO
$51.16
1 Bag of 10
Bag(s)
Threaded-to-Tube R 1/8 Push In 10 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
New
RS Stock No. 187-5704
BrandRS PRO
$64.70
1 Bag of 10
Bag(s)
Threaded-to-Tube - - - - Brass Male Nickel Plated Brass 55000 - - 20 bar +80°C -20°C
RS Stock No. 176-2212
BrandRS PRO
$47.132
Each (In a Pack of 10)
units
Threaded G 1/8 G 1/8 Female 90° Stainless Steel Female - - No - 140 bar +300°C -110°C
RS Stock No. 176-0951
BrandRS PRO
$4.821
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 4 mm Male 90° Brass - Brass - No - - - -
RS Stock No. 916-0763
BrandRS PRO
$3.178
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 4 mm Male - Polyoxymethylene - Nickel Plated Brass - No - 10 bar +60°C 0°C
RS Stock No. 176-1814
BrandRS PRO
$10.811
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/2 Push In 10 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1811
BrandRS PRO
$13.686
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/2 Push In 14 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1349
BrandRS PRO
$5.501
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 8 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-0953
BrandRS PRO
$3.802
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 6 mm Male 90° Brass - Brass - No - - - -
Related Products
RS Pro push-in fittings made of nickel plated ...
Description:
RS Pro push-in fittings made of nickel plated brass ensure highest quality,reliability and endurance in the pneumatic field. Main advantages:- Quick connection and disconnection- Full Flow and Vacuum resistant tank to special shaped seals- 3 threads available, BSPP, BSPT (universal ...
A range of Tube-to-Thread and Tube-to-Tube adaptors for ...
Description:
A range of Tube-to-Thread and Tube-to-Tube adaptors for push-in pneumatic fittings. Use for nylon, polyamide (PA), polurethane (PU) and Hytrel tubing. Pressure range -750mm Hg to 18 bar (subject to tube type)All tapered threads are pre-coated with non-PTFE thread sealant. ...
SMC’s KQG2 stainless steel range provides engineers with ...
Description:
SMC’s KQG2 stainless steel range provides engineers with a choice of high performance, lightweight, compact push in fittings for when resistance to corrosion, chemicals and high temperatures is vital. 30% smaller and 62% lighter than the existing KQG range and ...
KQ2 one-touch, metric and inch size fittings are ...
Description:
KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release ...