Pneumatic Elbow Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic elbow threaded-to-tube adaptors being one example.

What are pneumatic elbow threaded-to-tube adaptors used for?

Pneumatic elbow threaded-to-tube adaptors are compact adaptors that can connect either single or multiple hoses.

Types of pneumatic elbow threaded-to-tube adaptors

Pneumatic elbow threaded-to-tube adaptors come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 81 - 100 of 665 products
Results per page
Description Price Connection Style Connector A Connector B Connector A - Gender Angle Body Material Connector B - Gender Thread Material Manufacturer Series Swivel Connection Mounting Type Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 916-0785
BrandRS PRO
$4.116
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 8 mm Male - Polyoxymethylene - Nickel Plated Brass - No - 10 bar +60°C 0°C
New
RS Stock No. 187-5700
BrandRS PRO
$60.37
1 Bag of 10
Bag(s)
Threaded-to-Tube - - - - Brass Male Nickel Plated Brass 55000 - - 20 bar +80°C -20°C
RS Stock No. 176-1811
BrandRS PRO
$13.686
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/2 Push In 14 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1349
BrandRS PRO
$5.501
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 8 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-0953
BrandRS PRO
$3.802
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 6 mm Male 90° Brass - Brass - No - - - -
RS Stock No. 176-1416
BrandRS PRO
$5.589
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 6 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 144-2617
BrandRS PRO
$51.65
1 Bag of 10
Bag(s)
Threaded-to-Tube R 1/4 Push In 10 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 176-0964
BrandRS PRO
$7.205
Each (In a Pack of 10)
units
Threaded-to-Tube G 1/4 Push In 8 mm Male 90° Brass - Brass - Yes - - - -
RS Stock No. 299-4171
BrandRS PRO
$5.49
Each (In a Pack of 5)
units
Threaded-to-Tube G 1/8 Push In 6 mm Male 90° - - - - No - 15 bar +70°C -18°C
RS Stock No. 176-1807
BrandRS PRO
$10.485
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 12 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1332
BrandRS PRO
$4.27
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 4 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
New
RS Stock No. 187-5702
BrandRS PRO
$64.70
1 Bag of 10
Bag(s)
Threaded-to-Tube - - - - Brass Male Nickel Plated Brass 55000 - - 20 bar +80°C -20°C
RS Stock No. 176-2216
BrandRS PRO
$59.565
Each (In a Pack of 10)
units
Threaded G 1/8 G 1/8 Male 90° Stainless Steel Female - - No - 140 bar +300°C -110°C
RS Stock No. 176-1816
BrandRS PRO
$11.466
Each (In a Pack of 10)
units
Threaded-to-Tube R 3/8 Push In 12 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 916-0772
BrandRS PRO
$3.612
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 6 mm Male - Polyoxymethylene - Nickel Plated Brass - No - 10 bar +60°C 0°C
RS Stock No. 176-0966
BrandRS PRO
$14.208
Each (In a Pack of 10)
units
Threaded-to-Tube G 1/8 Push In 4 mm Male 90° Brass - Brass - Yes - - - -
RS Stock No. 144-2614
BrandRS PRO
$33.20
1 Bag of 10
Bag(s)
Threaded-to-Tube R 1/8 Push In 8 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 176-1804
BrandRS PRO
$7.172
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 10 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 299-4137
BrandRS PRO
$7.556
Each (In a Pack of 5)
units
Threaded-to-Tube R 1/8 Push In 4 mm Male 90° - - - - No - 15 bar +70°C -18°C
RS Stock No. 916-0788
BrandRS PRO
$5.866
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 10 mm Male - Polyoxymethylene - Nickel Plated Brass - No - 10 bar +60°C 0°C
Related Products
RS Pro push-in fittings made of nickel plated ...
Description:
RS Pro push-in fittings made of nickel plated brass ensure highest quality,reliability and endurance in the pneumatic field. Main advantages:- Quick connection and disconnection- Full Flow and Vacuum resistant tank to special shaped seals- 3 threads available, BSPP, BSPT (universal ...
A range of Tube-to-Thread and Tube-to-Tube adaptors for ...
Description:
A range of Tube-to-Thread and Tube-to-Tube adaptors for push-in pneumatic fittings. Use for nylon, polyamide (PA), polurethane (PU) and Hytrel tubing. Pressure range -750mm Hg to 18 bar (subject to tube type)All tapered threads are pre-coated with non-PTFE thread sealant. ...
SMC’s KQG2 stainless steel range provides engineers with ...
Description:
SMC’s KQG2 stainless steel range provides engineers with a choice of high performance, lightweight, compact push in fittings for when resistance to corrosion, chemicals and high temperatures is vital. 30% smaller and 62% lighter than the existing KQG range and ...
KQ2 one-touch, metric and inch size fittings are ...
Description:
KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release ...