Pneumatic Straight Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic straight threaded to tube adaptors being one example.

What are pneumatic straight threaded to tube adaptors used for?

Pneumatic straight threaded-to-tube adaptors have one threaded side and the other with a tube connection. The threaded side connects to the system and the other to the tube.

Types of pneumatic straight threaded to tube adaptors

Pneumatic straight threaded-to-tube adaptors come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 1 - 20 of 820 products
Results per page
Description Price Connection Style Connector A Connector B Tube Connection - Tube Size Connector A - Gender Connector B - Gender Manufacturer Series Mounting Type Body Material Maximum Operating Pressure Tube Connection - Type Maximum Operating Temperature Minimum Operating Temperature Chemical Resistant
RS Stock No. 916-0713
BrandRS PRO
$2.135
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 6 mm - Male - 0 Inline Nickel Plated Brass 10 bar - +60°C 0°C -
RS Stock No. 916-0700
BrandRS PRO
$2.104
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 4 mm - Male - 0 Inline Nickel Plated Brass 10 bar - +60°C 0°C -
RS Stock No. 916-0710
BrandRS PRO
$2.256
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 8 mm - Male - 0 Inline Nickel Plated Brass 10 bar - +60°C 0°C -
RS Stock No. 916-0732
BrandRS PRO
$3.34
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 6 mm - Female - 0 Inline Nickel Plated Brass 10 bar - +60°C 0°C -
RS Stock No. 144-2634
BrandRS PRO
$16.47
1 Bag of 10
Bag(s)
Threaded-to-Tube M5 Push In 4 mm - Female - 0 Inline Plastic 9.9 kgf/cm², 990 kPa - +60°C 0°C -
RS Stock No. 144-2635
BrandRS PRO
$22.62
1 Bag of 10
Bag(s)
Threaded-to-Tube M5 Push In 6 mm - Female - 0 Inline Plastic 9.9 kgf/cm², 990 kPa - +60°C 0°C -
RS Stock No. 176-1281
BrandRS PRO
$5.229
Each (In a Pack of 10)
units
Threaded-to-Tube G 3/8 Push In 8 mm - Male - 0 Inline Brass 20 bar - +80°C -20°C -
RS Stock No. 916-0722
BrandRS PRO
$3.366
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 10 mm - Male - 0 Inline Nickel Plated Brass 10 bar - +60°C 0°C -
RS Stock No. 176-1772
BrandRS PRO
$14.539
Each (In a Pack of 10)
units
Threaded-to-Tube G 1/2 Push In 10 mm - Female - 0 Inline Brass 20 bar - +80°C -20°C -
RS Stock No. 176-1295
BrandRS PRO
$9.252
Each (In a Pack of 10)
units
Threaded-to-Tube G 3/8 Push In 8 mm - Female - 0 Inline Brass 20 bar - +80°C -20°C -
RS Stock No. 144-2636
BrandRS PRO
$28.84
1 Bag of 10
Bag(s)
Threaded-to-Tube R 1/8 Push In 6 mm - Female - 0 Inline Plastic 9.9 kgf/cm², 990 kPa - +60°C 0°C -
RS Stock No. 916-0704
BrandRS PRO
$2.169
Each (In a Pack of 10)
units
Threaded-to-Tube M5 Push In 6 mm - Male - 0 Inline Nickel Plated Brass 10 bar - +60°C 0°C -
RS Stock No. 176-1285
BrandRS PRO
$5.805
Each (In a Pack of 10)
units
Threaded-to-Tube G 1/2 Push In 6 mm - Male - 0 Inline Brass 20 bar - +80°C -20°C -
RS Stock No. 299-4058
BrandRS PRO
$3.21
Each (In a Pack of 5)
units
Threaded-to-Tube R 1/4 Push In 6 mm - Male - - Inline - 15 bar - +70°C -18°C -
RS Stock No. 176-1400
BrandRS PRO
$3.323
Each (In a Pack of 10)
units
Threaded-to-Tube G 1/8 Push In 4 mm - Male - 0 Inline Brass 20 bar - +80°C -20°C -
RS Stock No. 916-0738
BrandRS PRO
$3.077
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 4 mm - Female - 0 Inline Nickel Plated Brass 10 bar - +60°C 0°C -
RS Stock No. 176-1773
BrandRS PRO
$14.101
Each (In a Pack of 10)
units
Threaded-to-Tube G 3/8 Push In 12 mm - Female - 0 Inline Brass 20 bar - +80°C -20°C -
RS Stock No. 299-3803
BrandRS PRO
$3.416
Each (In a Pack of 5)
units
Threaded-to-Tube G 1/8 Push In 5 mm - Male - - Inline - 15 bar - +70°C -18°C -
RS Stock No. 176-1768
BrandRS PRO
$9.20
Each (In a Pack of 10)
units
Threaded-to-Tube G 1/2 Push In 10 mm - Male - 0 Inline Brass 20 bar - +80°C -20°C -
RS Stock No. 176-1282
BrandRS PRO
$3.669
Each (In a Pack of 10)
units
Threaded-to-Tube M5 Push In 6 mm - Male - 0 Inline Brass 20 bar - +80°C -20°C -
Related Products
A high-quality polymer push in fitting suitable for ...
Description:
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable ...
Enots compression fittings are ideal for most general ...
Description:
Enots compression fittings are ideal for most general industrial applications. Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing ...
The NPQH-D range offers a convenient push-in fitting ...
Description:
The NPQH-D range offers a convenient push-in fitting system with over 1000+ types of standard and function fittings. Reliable pneumatic fittings offer you several benefits which are outlined below. · Effortless, quick and simple push-pull principle installation· Robust, solid nickel-plated ...
Festo NPQP range of push in bulkhead connectors ...
Description:
Festo NPQP range of push in bulkhead connectors that are designed to easily connect tubing and provide a reliable seal. Polypropylene fitting for use in applications with extreme media influences. For pneumatic applications with a temperature range up to 60°C ...