I/P & E/P Converters

Filters

Viewing 1 - 6 of 6 products
Results per page
Description Price Manufacturer Series Flow Rate Input Signal Connection Size Connection Thread Standard Maximum Operating Pressure Maximum Operating Temperature Connection Thread Size Minimum Operating Pressure Minimum Operating Temperature Hazardous Area Certification Overall Height Minimum Outlet Pressure Maximum Input Pressure
RS Stock No. 884-9279
Mfr. Part No.ITV2010-01F2BS3
BrandSMC
$1,056.95
Each
units
- 1500L/min 4 → 20mA G 1/4 G 0.2 MPa +50°C 1/4 - 0°C - - - -
RS Stock No. 538-3782
Mfr. Part No.EX140 01PK4EE1
$1,378.41
Each
units
140 <2.5NL/min 4-20mA NPT 1/4 Female NPT 15 psi +85°C 1/4 in 3psi -40°C ATEX - - -
RS Stock No. 873-2648
Mfr. Part No.ITV0050-0BS
BrandSMC
$622.50
Each
units
- - - - - - +50°C - - 0°C - 86 (For Single Unit) mm, 89 (For Manifold) mm 0.001MPa 1MPa
RS Stock No. 538-3798
Mfr. Part No.AC0100
$1,665.49
Each
units
422 0.2 (Low) L/min, 0.4 (High) L/min 4-20mA NPT 1/4 Female NPT 1 bar +70°C 1/4 in 0.2bar -20°C - - - -
RS Stock No. 729-486
Mfr. Part No.540400R
$1,338.50
Each
units
100X, 101X 1.75L/min 1 → 10V (Volts) NPT 1/4 Female NPT 120 psi +60°C 1/4 in 2psi - - - - -
RS Stock No. 729-470
Mfr. Part No.400100R
$1,169.46
Each
units
100X, 101X 0.85L/min 4-20mA NPT 1/4 Female NPT 15 psi +85°C 1/4 in 3psi -40°C - - - -
Related Products
A range of SEPIC DC-DC Converters from Linear ...
Description:
A range of SEPIC DC-DC Converters from Linear Technology which can be used in applications where the output voltage may be either higher or lower than the input voltage. The SEPIC (Single-Ended Primary-Inductor Converter) topology also allows these converters to ...
The A Series power isolated DC to high ...
Description:
The A Series power isolated DC to high voltage DC converters are ultra miniature. These converters are ideal for applications where minimal size and weight are required. Input/Output proportional. Quasi-sinewave Oscillator. Control Pin. Current - Low leakage. Low Output/Input Capacitance. ...
The Recom R420 is designed for auxillary power ...
Description:
The Recom R420 is designed for auxillary power from 4-20mA loops. Other low power budget applications also benefit from R420. Applications also include energy scavenging and indoor solar powered circuits. The R420 has the ability to power microprocessors, data-loggers and ...
EFD type ferrite core low profile SMT package ...
Description:
EFD type ferrite core low profile SMT package with 10 gull wing terminals. High through-put power capability. Applications in general purpose isolated DC/DC Converters (up to 55W); Power over Ethernet (PoE/12W and PoE +/30W) Powered Devices (PD) and Power Sourcing ...