Pneumatic Air Amplifiers

Filters

Viewing 1 - 5 of 5 products
Results per page
Description Price Throat Diameter Inlet Port Size Input Air Flow Material Maximum Operating Pressure Inlet Port - Thread Size
RS Stock No. 760-6107
Mfr. Part No.A15006
BrandMeech
$144.30
Each
units
25mm BSP 1/4 23cfm Aluminium 10 bar BSP 1/4
RS Stock No. 760-6087
Mfr. Part No.A15015
BrandMeech
$198.75
Each
units
40mm G 3/8 25cfm Aluminium 10 bar G 3/8in
RS Stock No. 760-6116
Mfr. Part No.A15005
BrandMeech
$127.36
Each
units
12mm M5 x 6 13cfm Aluminium 8 bar M5 x 6mm
RS Stock No. 760-6074
Mfr. Part No.A10015
BrandMeech
$355.51
Each
units
40mm G 3/8 25cfm Stainless Steel 10 bar G 3/8
RS Stock No. 760-6078
Mfr. Part No.A15008
BrandMeech
$105.66
Each
units
20mm G 1/4 15cfm Aluminium 10 bar G 1/4
Related Products
Fitted at low points in compressed air systems ...
Description:
Fitted at low points in compressed air systems where water collectsFully automatic operation Zinc body, Acetal resin drain housingMetal bowl, capacity 114mlTemperature range +5°C to +60°C.
SMC AD series automatic drip leg drain. Automatic ...
Description:
SMC AD series automatic drip leg drain. Automatic drains are an efficient way of removing condensates such as water from your pneumatic system. Removing the chance of emptying being overlooked and reducing the risk of damage to expensive equipment and ...
A fully automatic drip leg drain for removing ...
Description:
A fully automatic drip leg drain for removing liquids from pneumatic/compressed air systems. Manufactured from zinc alloy with a transparent polycarbonate bowl. A G1/8 connection on the bottom of the bowl allows the collected liquids to be piped away and ...
High flow capacity filters, lubricators and separators with ...
Description:
High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar. 5μm filterMaximum operating pressure of 9.9 barAuto-drain types require 100l/min flow ...