Pneumatic Timers

Pneumatic timers are used in industrial systems where time needs to be measured. They are used in place of electrical timers, where the use of electricity is unsafe or undesirable, for example where flammable materials are present. 


Most pneumatic timers use a chamber and a piston to measure time. Air is allowed into the chamber, which pushes the piston towards the end and allows a precise time to be set. 


Pneumatic timers do not use electrical current and are very accurate. 


What are pneumatic timers used for?

Pneumatic timers are used where an electrical current is undesirable, restricted, unavailable or dangerous, such as in the mining, oil and gas industries. You can use them where precise time control is important. By utilising a piston and control valve rather than an electrical current found in a standard timer, pneumatic timers do not generate sparks that could cause fires or explosions. 


Types of pneumatic timers 

Choose the timer most suitable for your needs depending on maximum and minimum operating pressures, temperatures and time required. Certain models have Hazardous Area Certification.






...
Read more Read less

Filters

Viewing 1 - 14 of 14 products
Results per page
Description Price Manufacturer Series Minimum Operating Pressure Maximum Operating Pressure Minimum Operating Temperature Maximum Operating Temperature Minimum Time Maximum Time Hazardous Area Certification
RS Stock No. 725-024
Mfr. Part No.81507720
BrandCrouzet
$292.93
Each
units
81 2bar 8 bar -5°C +50°C 0.1s 30s -
RS Stock No. 655-6919
Mfr. Part No.81506945
BrandCrouzet
$413.46
Each
units
81 2bar 8bar -5°C +50°C - - ATEX
RS Stock No. 777-053
Mfr. Part No.M/1430
BrandNorgren
$1,173.59
Each
units
- 2bar 10 bar +5°C +80°C 0.2s 5s -
RS Stock No. 384-333
Mfr. Part No.VR2110-01
BrandSMC
$248.29
Each
units
VR 0.1MPa 1 MPa -5°C +60°C 0.5s 60s -
RS Stock No. 777-126
Mfr. Part No.04043102000
BrandNorgren
$235.24
Each
units
04 2bar 10 bar -20°C +80°C 0.2ms 0.4ms -
RS Stock No. 410-488
Mfr. Part No.PRT-C10
BrandParker
$313.70
Each
units
PRT 3bar 8 bar -15°C +60°C 0.1s 30s -
RS Stock No. 724-891
Mfr. Part No.81503710
BrandCrouzet
$279.42
Each
units
81 2bar 8 bar -5°C +50°C 0.1s 15s -
RS Stock No. 466-5746
Mfr. Part No.81503725
BrandCrouzet
$303.91
Each
units
81 2bar 8 bar -5°C +50°C 0.1s 60s -
RS Stock No. 305-5996
Mfr. Part No.81503720
BrandCrouzet
$253.42
Each
units
81 2bar 8 bar -5°C +50°C 0.1s 30s -
RS Stock No. 410-498
Mfr. Part No.PRT-E10
BrandParker
$305.21
Each
units
PRT 3bar 8 bar -15°C +60°C 0.1s 3s -
RS Stock No. 410-523
Mfr. Part No.PRT-B10
BrandParker
$298.75
Each
units
PRT 3bar 8 bar -15°C +60°C 10s 180s -
RS Stock No. 410-517
Mfr. Part No.PRT-A10
BrandParker
$302.99
Each
units
PRT 3bar 8 bar -15°C +60°C 0.1s 30s -
RS Stock No. 410-460
Mfr. Part No.PRT-F10
BrandParker
$226.30
Each
units
PRT 3bar 8 bar -15°C +60°C 0.1s 3s -
RS Stock No. 305-6006
Mfr. Part No.81506710
BrandCrouzet
$247.72
Each
units
81 2bar 8 bar -5°C +50°C 0.1s 15s -
Related Products
Professionally assembled contactor Timers by Schneider Electric provide ...
Description:
Professionally assembled contactor Timers by Schneider Electric provide you with the option of delaying timed functions on your control circuit linked via the main contactor. This can be beneficial in controlling pre-set on/off operations cyclically or at a defined interval, ...
The Hengstler 495 series 6-digit totalizing pneumatic counter ...
Description:
The Hengstler 495 series 6-digit totalizing pneumatic counter maintenance-free counter has front-panel and pneumatic reset capability. This counter, being completely pneumatic in operation is particularly suited to explosion risk areas where electrical pulse counters are not permitted. Minimum pulse length ...
The Crouzet 99 series 4-digit pneumatic counter has ...
Description:
The Crouzet 99 series 4-digit pneumatic counter has manual zero reset on the front panel. It has an instant rear connection. This counter, being completely pneumatic in operation, is particularly suited to explosion risk areas where electrical pulse counters are ...
Logic units are best thought of as miniature ...
Description:
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they ...