Bearing Units - Plummer Block & Accessories

Filters

Viewing 1 - 20 of 198 products
Results per page
Description Price Inside Diameter Material Centre Height Mount Hole Size Length Depth Overall Height Mount Hole Centre-to-Centre For Use With
RS Stock No. 750-8958
Mfr. Part No.UCP205-16
BrandRS PRO
$23.78
Each
units
25.4mm Cast Iron 36.5mm 1/2 in 5-1/2in 1.338in 71.04mm 104.78mm -
RS Stock No. 750-8964
Mfr. Part No.UCP206
BrandRS PRO
$24.98
Each
units
30mm Cast Iron 42.9mm 17 mm 165mm 38.1mm 83mm 121mm -
RS Stock No. 750-8952
Mfr. Part No.UCP205
BrandRS PRO
$24.76
Each
units
25mm Cast Iron 36.5mm 13 mm 140mm 34mm 71mm 105mm -
RS Stock No. 750-8933
Mfr. Part No.UCP201
BrandRS PRO
$27.79
Each
units
12mm Cast Iron 30.2mm 13 mm 127mm 31mm 62mm 95mm -
RS Stock No. 750-8942
Mfr. Part No.UCP204-12
BrandRS PRO
$21.93
Each
units
19.04mm Cast Iron 33.34mm 1/2 in 5in 1.22in 65.1mm 95.25mm -
RS Stock No. 750-8930
Mfr. Part No.UCP202-10
BrandRS PRO
$14.29
Each
units
15.87mm Cast Iron 30.2mm 1/2 in 5in 1.22in 62mm 95.25mm -
RS Stock No. 750-8946
Mfr. Part No.UCP204
BrandRS PRO
$30.63
Each
units
20mm Cast Iron 33.3mm 13 mm 127mm 31mm 65mm 95mm -
RS Stock No. 750-9018
Mfr. Part No.UCPA205
BrandRS PRO
$28.54
Each
units
25mm Cast Iron 36.5mm 10 mm 84mm 34mm 72mm 56mm -
RS Stock No. 750-8936
Mfr. Part No.UCP202
BrandRS PRO
$17.95
Each
units
15mm Cast Iron 30.2mm 13 mm 127mm 31mm 62mm 95mm -
RS Stock No. 750-8968
Mfr. Part No.UCP207-20
BrandRS PRO
$26.62
Each
units
31.75mm Cast Iron 47.6mm 21/32 in 6-37/64in 1.689in 92.87mm - -
RS Stock No. 750-8974
Mfr. Part No.UCP208
BrandRS PRO
$45.34
Each
units
40mm Cast Iron 49.2mm 17 mm 184mm 49.2mm 98mm 137mm -
RS Stock No. 750-8977
Mfr. Part No.UCP207
BrandRS PRO
$38.29
Each
units
35mm Cast Iron 47.6mm 17 mm 167mm 42.9mm 93mm 127mm -
RS Stock No. 750-9012
Mfr. Part No.UCPA206
BrandRS PRO
$25.93
Each
units
30mm Cast Iron 42.9mm 14 mm 94mm 38.1mm 84mm 66mm -
RS Stock No. 750-8949
Mfr. Part No.UCP203
BrandRS PRO
$22.60
Each
units
17mm Cast Iron 30.2mm 13 mm 127mm 31mm 62mm 95mm -
RS Stock No. 750-8980
Mfr. Part No.UCP211-32
BrandRS PRO
$77.15
Each
units
50.8mm Cast Iron 63.5mm 25/32 in 8-5/8in 2.189in 126.21mm 171.05mm -
RS Stock No. 750-8983
Mfr. Part No.UCP209
BrandRS PRO
$52.90
Each
units
45mm Cast Iron 54mm 17 mm 190mm 49.2mm 106mm 146mm -
RS Stock No. 750-9021
Mfr. Part No.UCPA207
BrandRS PRO
$22.87
Each
units
35mm Cast Iron 47.6mm 14 mm 110mm 42.9mm 95mm 80mm -
RS Stock No. 750-8992
Mfr. Part No.UCP212
BrandRS PRO
$102.23
Each
units
60mm Cast Iron 69.8mm 20 mm 241mm 65.1mm 138mm 184mm -
RS Stock No. 750-8986
Mfr. Part No.UCP210
BrandRS PRO
$65.13
Each
units
50mm Cast Iron 57.2mm 20 mm 206mm 51.6mm 114mm 159mm -
RS Stock No. 750-9024
Mfr. Part No.UCPA208
BrandRS PRO
$38.81
Each
units
40mm Cast Iron 49.2mm 14 mm 116mm 49.2mm 100mm 84mm -
Related Products
Double-lip L seals are made of thermoplastic elastomer ...
Description:
Double-lip L seals are made of thermoplastic elastomer (TPE) and can be used for peripheral speeds of up to 13 m/s (2600 ft/min). In all other aspects, they are the same as the G seal. However they are only available ...
The bearing seating in the housing is sufficiently ...
Description:
The bearing seating in the housing is sufficiently wide to enable the bearing to be displaced axially. Bearings which are to locate a shaft axially in both directions (locating bearings) must always be fixed axially in position in the housing ...
Cast iron self lubricated pillow block bearings from ...
Description:
Cast iron self lubricated pillow block bearings from NSK. These pillow block bearings are easy to fit and long lasting. Designed to accommodate an initial housing misalignment of up to 0.030 radians. Made from cast iron to BS1452Spherical bearing insert ...
Easy to install pedestal bearings compensate for alignment ...
Description:
Easy to install pedestal bearings compensate for alignment errors and avoid edge pressures. The housings are manufactured from an impact resistant, rigid, thermoplastic composite material. High sliding speeds of up to 1.5m/s for rotary movements and 8m/s for linear movements ...