Drills

Drills are used to make holes in materials as well as loosening and tightening screws and bolts. The main conscideration when selecting a drill is the type of material you will be drilling as harder materials will require higher power and additional features such as hammer action.


What type of drills are available?


  • Drill Drivers - Drill drivers combine two functionalities, drilling of holes and the driving screws into the hole. Most quality drills are equipped with user-defined speeds and torque settings to adapt to any job in hand. Drill drivers offer a lower torque setting offering a smooth screwing process.

  • Combi Drills - A Combi drill is a multi-purpose tool, with most having a keyless chuck to hold any drill bits. It can be used at high speed for drilling applications into a variety of materials such as masonry, woods, metals and plastics with the added functionality of hammer action. With the correct screw driving bit, you can drive screws in easily.

  • Impact Drill/Drivers - Offering similar characteristics to a drill driver however, it provides more torque and power for driving in screws and hex bolts. Impact drill/drivers typically only offer one gear, but great torque making it great if you do need to drill through tough knotty wood or metals.

  • Hammer Drills - Hammer drills increase the of force to the bit when being drilled. Similar princple to a jackhammer, driving the drill bit into the material. This action provides a greater force to harder materials such as stone and masonry.

  • SDS Drills - These are a more powerful version of a hammer drill and use a slotted drive system to increase the force for drilling and chiselling. Designed mainly to be used on hard materials such as concrete, stone and masonry and other heavy-duty applications.

  • Angle Drills - Angled drills have the functionality of a combi drill, but with a 90 degree bent head. Seen to compliment the combi, but for those hard to reach areas. The angled head allows for a smaller drill bit making it easier to drive screws or drill materials in a confined space.

  • Magnetic Drills - Mag Drills are essentially a portable bench drill for drilling metals. The base of the drill uses magnets to lock itself to the material so prevent it moving while drilling. Magnetic drills are most often used with annular cutters for an accurate cut.

...
Read more Read less

Filters

Viewing 1 - 14 of 14 products
Results per page
Description Price Drill Type Voltage Rating Type Battery Type Corded/Cordless Battery Capacity Brushed/Brushless Motor Series Chuck Size Chuck Type Drilling Capacity Masonry Drilling Capacity Metal Orientation Max Speed
RS Stock No. 547-616
BrandRS PRO
$49.79
Each
units
Drill 6 → 18V dc PCB Drill - Corded - Brushed - - Collet - - Straight -
RS Stock No. 764-6476
Mfr. Part No.DCF885N-XE
BrandDeWALT
$234.67
Each
units
Drill Driver 18V - Li-Ion Cordless - Brushed - 6.35mm Keyless - - - -
RS Stock No. 791-7104
Mfr. Part No.DCD785M2-XE
BrandDeWALT
$1,686.30
Each
units
Hammer Drill 18V Drill Driver Li-Ion Cordless 4Ah Brushed DCD 13mm Keyless 13 mm 13 mm Straight 2000rpm
RS Stock No. 764-6420
Mfr. Part No.DCF813S2-XE
BrandDeWALT
$304.68
Each
units
Drill Driver 12V - Li-Ion Cordless - Brushed - 3/8mm Hex - - - -
RS Stock No. 812-9960
Mfr. Part No.DA331DZ
BrandMakita
$174.74
Each
units
Drill Driver 10.8V Angle Drill (Body Only) Li-Ion Cordless - Brushed DA - Keyless - 10 mm Angled 800rpm
RS Stock No. 124-0006
Mfr. Part No.DF332DZ
BrandMakita
$245.89
Each
units
Drill Driver 10.8V Brushless Drill Driver Body Only Cordless - Brushless CXT 10mm Keyless - 10 mm Straight 1500rpm
RS Stock No. 541-198
Mfr. Part No.DV20VB2(H8)
BrandHitachi
$475.72
Each
units
Drill Driver 240V - - Corded - Brushed - 13mm Keyed 20 mm 13 mm - -
RS Stock No. 269-4528
Mfr. Part No.6408
BrandMakita
$277.50
Each
units
- - Variable Speed - - - - - 10mm - - 10 mm - -
RS Stock No. 812-9976
Mfr. Part No.DHR242Z
BrandMakita
$526.44
Each
units
SDS Drill 18 - Li-Ion Cordless - Brushless BL - SDS Plus - 13 mm Straight -
RS Stock No. 123-9996
Mfr. Part No.HP332DZ
BrandMakita
$240.03
Each
units
Hammer Drill 10.8 - Li-Ion Cordless 2Ah Brushless - 10mm Keyless - 10 mm Straight -
RS Stock No. 878-3154
Mfr. Part No.SCMT90000
BrandSidchrome
$1,322.08
Each
units
Drill Driver 18V - Li-Ion Cordless 3Ah Brushed - 1/2mm 1/2 in Square - - - -
RS Stock No. 878-3163
Mfr. Part No.SCMT90010
BrandSidchrome
$599.68
Each
units
Drill Driver 10.8V - Li-Ion Cordless 1.5Ah Brushed - 3/8mm - - - - -
RS Stock No. 878-3166
Mfr. Part No.SCMT90012
BrandSidchrome
$609.72
Each
units
Drill Driver 10.8V - Li-Ion Cordless 1.5Ah Brushed - 1/2mm 1/2 in Square - - - -
RS Stock No. 812-9922
Mfr. Part No.DDA351Z
BrandMakita
$407.56
Each
units
Drill Driver 18V Angle Drill Li-Ion Cordless - Brushed BDA - Keyless - 10 mm Angled 1800rpm
Related Products
RS Pro Air Drill, 10 mm keyless chuck ...
Description:
RS Pro Air Drill, 10 mm keyless chuck air drill with a magnesium body. Lightweight feel and a high performance motor maximise output speed. Ergonomic grip design for better manoeuvrability, while the durable motor designed with high balance for precision ...
Aluminium construction, reversible action 3/8in / 10mm air ...
Description:
Aluminium construction, reversible action 3/8in / 10mm air drill. Ideal for drilling, reaming and honing. Rear exhaust through handle. Side mounted forward/reverse shift. Triple planetary gear system. Jacobs keyless chuck. Powerful air motor. Positive trigger action. Sound 87dBAAverage air consumption ...
High-speed precision drilling machine fitted on a column ...
Description:
High-speed precision drilling machine fitted on a column support for drilling epoxy glass or bakelite boards.Features a work light, mini magnifier, in-line coupling for dust suction and an electronic controller.Small diameter drill bits are available from the catalogue.
The range of KEENSERTS® installation tools ensure quick, ...
Description:
The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, ...