ESD Continuous Monitors

ESD continuous monitors, or constant monitors, continuously check for electrostatic discharge (ESD) on work surfaces. This is important for preventing damage to sensitive electronic equipment or to monitor discharge in areas where there is a danger of igniting flammable liquids or gases. Other grounding components such as wrist straps, ESD safe matsand ESD grounding cordscan be attached to the monitors, connecting work surfaces and operators.

LEDs (light emitting diodes) indicate different colours to alert users if there is a discharge, sometimes accompanied by an audible alarm.

What are ESD continuous monitors used for?

ESD continuous monitors save set-up time, ensuring integrity of the entire ground loop, meaning wrist straps and other ESD accessories don’t need to be checked individually at the start of a shift.

Types of ESD continuous monitors

Some monitors not only detect static electricity, but also actively eliminate it by balancing ions. This type of continuous monitor is called an ’ioniser’, ’ionising bar’ or ’static bar’.

Monitors can be connected to one or two wrist straps and one or two work surfaces, plus grounding. Terminal types and supply voltages vary. Some products include EOS (electrical overstress) detection and/or charge detection.


...
Read more Read less

Filters

Viewing 1 - 4 of 4 products
Results per page
Description Price Terminal Type Supply Voltage Height Number of Operators Length Number of Worksurfaces Width Supervisor Monitoring Parking Station Charge Detection EOS Detection Complies with EN 61340-5-1
RS Stock No. 700-8843
Mfr. Part No.IZD10-510
BrandSMC
$733.57
Each
units
Crimp 24V dc 13 mm - 87.5mm - 16.6mm - - - - -
RS Stock No. 168-5578
Mfr. Part No.19243
BrandDesco
$509.07
Each
units
Snap, 10 mm Jack, 10 mm Snap 24 V dc, 100 → 240 V ac 23 mm 1 70mm 1 53mm - - - Yes -
RS Stock No. 685-8763
Mfr. Part No.99093
$550.30
Each
units
Phone 220V ac - 2 - 2 - Yes Yes No No Yes
RS Stock No. 685-8760
Mfr. Part No.PS604024CG-230
BrandDesco EMIT
$143.28
Each
units
- 220V ac - - - - - - - - - Yes
Related Products
Single Station Continuous Monitors for Operator And ESD ...
Description:
Single Station Continuous Monitors for Operator And ESD Working surfaceContinuously monitors the grounding integrity of one operator and ESD workstationIdeal for workstations for assembly, test, packaging or other applicationsWorking surface monitoring may be disableRequires AC adaptor RS 877-2475 available ...
Dual wire wrist strap from Menda. Dual wire ...
Description:
Dual wire wrist strap from Menda. Dual wire wrist strap provides redundancy - even if one dual wire wrist strap conductor is severed, operator has reliable path-to-ground with other wire. Used with resistive loop technology to continuously monitor and verify ...