Hall Effect Sensor ICs

Filters

Viewing 481 - 483 of 483 products
Results per page
Description Price Magnetic Type Mounting Type Pin Count Minimum Magnetic Sensor Release Point Maximum Magnetic Sensor Operating Point Minimum Operating Supply Voltage Maximum Operating Supply Voltage Length Width Height Dimensions Minimum Operating Temperature Maximum Operating Temperature Package Type
RS Stock No. 753-2018
Mfr. Part No.A1326LLHLT-T
$3.37
Each (In a Pack of 2)
units
Linear Surface Mount 3 - - 4.5 V 5.5 V 2.98mm 1.91mm 0.95mm 2.98 x 1.91 x 0.95mm -40 °C +150 °C SOT-23
New
RS Stock No. 203-6958
Mfr. Part No.SS351AT
BrandHoneywell
$3.248
Each (In a Pack of 5)
units
Omnipolar Surface Mount 3 10 Gs 135 Gs - - - - - - - - SOT-23
RS Stock No. 166-1134
Mfr. Part No.TLE49644MXTSA1
BrandInfineon
$0.453
Each (On a Reel of 3000)
units
Unipolar Surface Mount 3 3.5 mT 15.1 mT 3 V 32 V 2.9mm 1.3mm 0.9mm 2.9 x 1.3 x 0.9mm -40 °C +170 °C PG-SOT-2-3
Related Products
The Allegro Microsystems A1120, A1121, A1122, A1123, and ...
Description:
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, ...
Integrated speed sensor ICPole size independent operation2-pin current ...
Description:
Integrated speed sensor ICPole size independent operation2-pin current interface-40°C to 150°C operating temperature range. Zero speed operation. No calibration required. Insensitive to mechanical vibration. Protection against reverse polarity. Integral capacitor. Vibration rejection. ApplicationsTransmission ...
Integrated speed and direction sensor ICPole size independent ...
Description:
Integrated speed and direction sensor ICPole size independent operation2-pin Pulse Width Modulated (PWM) current interface-40°C to 150°C operating temperature range. Zero speed operation. No calibration required. Insensitive to mechanical vibration. Protection against reverse polarity. Integral capacitor. ...
These magnetoresistive sensors are around ten times more ...
Description:
These magnetoresistive sensors are around ten times more sensitive (in range) than classic Hall effect sensors, in the direction parallel to the magnetoresistive element.Their omnipolar characteristics allow activation of the sensor by a north or south pole.