Electrical Installation Testers

Electrical installation testers verify the safety of electrical installations in domestic, commercial and industrial settings. They ensure that fixed wiring is safe and correctly installed to meet relevant local standards and safety requirements. 


Uses of electrical installation testers


You can use electrical installation testers for a variety of tests, including:

  • Insulation-continuity tests – diagnose breakdown of the insulation in various parts of the electrical system such as wires, transformers and motors. The quality of insulation is critical in ensuring uninterrupted and safe functioning of electrical circuits.  
  • Checking RCD devices – check the proper functioning of residual-current devices (RCDs). RCDs are designed to disconnect quickly to mitigate the harm caused from electric shock and to avoid current leaks that may lead to fire and other dangerous situations. 
  • Loop testing – a quick, convenient, and specific method of evaluating an electrical circuit's ability to engage protective devices (circuit breakers, fuses, RCDs). A ground loop determines the effectiveness of protective devices.
  • Resistance measurement of grounding systems – verification tests to ensure that a system's resistance is low enough to provide protection to people, equipment and structures. 

...
Read more Read less

Filters

Viewing 1 - 13 of 13 products
Results per page
Description Price Loop Impedance Test Type Automatic RCD Test RCD Ramp Test Non-Tripping Insulation Test Voltage Maximum Voltage Measurement Test Type Earth Resistance Measurement Downloadable Data Interface Type Continuity Test Current RCD Test Type Remote Switch Mode Test Standards
RS Stock No. 122-8555
Mfr. Part No.FLK-1662 AU
BrandFluke
$2,073.50
Each
units
- Yes Yes Yes 100 V, 250 V, 500 V, 1000 V 500V ac/dc Automatic RCD Test Sequence, Continuity, Continuity at L-N/N-PE Inputs, Earth Resistance, Frequency, Insulation at L-N/N-PE inputs, Insulation PreTest Safety function, Insulation Resistance, Loop & Line Resistance, Loop & Line Resistance-Resolution, Measure Motor Windings with Continuity Test, Measures Trip Time & Current for RCD Type A & AC in One Test, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short-Circuit Current, RCD Trip Current, RCD Trip Time, RCD Variable Current, Resistance, Test Smooth DC Sensitive RCDs, Voltage, Wiring Polarity Checker - - - 10mA - Yes -
RS Stock No. 901-1333
Mfr. Part No.MFT1835-AU
BrandMegger
$2,661.78
Each
units
2 Wire, 3 Wire Yes Yes Yes 1000V 600V Continuity, RCD Yes Yes Europe Mains 205 mA @ 0 2 Ω AC, B - IEC 60364
RS Stock No. 122-8556
Mfr. Part No.FLK-1663/FVF AU
BrandFluke
$3,212.00
Each
units
Phase to Earth, Phase to Neutral Yes Yes Yes 50 V, 100 V, 250 V, 500 V, 1000 V 500V ac/dc Automatic RCD Test Sequence, Continuity, Continuity at L-N/N-PE Inputs, Earth Resistance, Frequency, Insulation Resistance, Loop & Line Resistance, Measure Motor Windings with Continuity Test, Measures Trip Time & Current for RCD Type A & AC in One Test, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short-Circuit Current, RCD Trip Current, RCD Trip Time, RCD Variable Current, Resistance, Test Smooth DC Sensitive RCDs, Voltage, Wiring Polarity Checker Yes Yes USB 10mA A/F, AC, B/B+, G, S Yes -
RS Stock No. 122-8557
Mfr. Part No.FLK-1664FC/FVF AU
BrandFluke
$4,015.00
Each
units
Phase to Earth, Phase to Neutral Yes Yes Yes 50 V, 100 V, 250 V, 500 V, 1000 V 500V ac/dc Automatic RCD Test Sequence, Continuity, Frequency, Insulation Resistance, Loop & Line Resistance, Measure Motor Windings with Continuity Test, Measures Trip Time & Current for RCD Type A & AC in One Test, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short-Circuit Current, RCD Trip Current, RCD Trip Time, RCD Variable Current, Resistance, Voltage, Wiring Polarity Checker Yes Yes BLE, USB 10mA A/F, AC, B/B+, G, S Yes -
RS Stock No. 901-1330
Mfr. Part No.MFT1825-AU
BrandMegger
$2,540.79
Each
units
2 Wire, 3 Wire Yes Yes Yes 1000V 600V Continuity, RCD Yes Yes Europe Mains 205 mA @ 0 2 Ω AC, B - IEC 60364
RS Stock No. 758-6817
Mfr. Part No.INSTALTEST 3017
BrandMetrel
$3,499.56
Each
units
2 Wire, 3 Wire Yes - - 100 V, 1000 V, 250 V, 50 V, 500 V 550V Continuity, Wiring Polarity Yes Yes Australia Mains 200mA - - HD 384, IEC 60364
RS Stock No. 901-1321
Mfr. Part No.MFT1815-AU
BrandMegger
$1,948.05
Each
units
2 Wire, 3 Wire Yes Yes Yes 1000V 600V Continuity, RCD Yes Yes Europe Mains 205 mA @ 0 2 Ω AC, B - IEC 60364
RS Stock No. 712-6023
Mfr. Part No.MI-3125
BrandMetrel
$1,108.89
Each
units
3 Wire Yes - Yes - 550V ac Continuity Yes - - - - - -
RS Stock No. 175-4076
Mfr. Part No.1009-990
BrandMegger
$3,500.94
Each
units
- Yes Yes Yes 100 V, 250 V, 500 V, 600 V, 1000 V 600V - Yes Yes Bluetooth 205mA - - EN61010 CAT IV, IEC 61010-031:2008, IEC 61010-1:2010, IEC 61010-30:2010, IEC 61557:2007, IEC61326
RS Stock No. 799-9011
Mfr. Part No.P01157702
$9,967.00
Each
units
- - - - - - Wiring Polarity - Yes USB - - - EN 61010-I
RS Stock No. 2552221701
Mfr. Part No.FLK 1663/FVF AU Std CAL
BrandFluke
$3,268.00
Each
units
- - - - - - - - - - - - - -
RS Stock No. 2552221702
Mfr. Part No.FLK 1664 FC/FVF AU Std CAL
BrandFluke
$4,054.00
Each
units
- - - - - - - - - - - - - -
RS Stock No. 2552221700
Mfr. Part No.FLK 1662 AU Std CAL
BrandFluke
$2,154.00
Each
units
- - - - - - - - - - - - - -
Related Products
Using Field. Sense Technology the T6-600 measures voltage ...
Description:
Using Field. Sense Technology the T6-600 measures voltage up to 600 V ac through the open fork, without test lead contact to live voltage.+ Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm2), carrying ...
DET24C Additional Features. Ground resistance range : 0.050 ...
Description:
DET24C Additional Features. Ground resistance range : 0.050 Ω to 1500 ΩTrue RMS Ground leakage current range : 0.2 mA to 35 AAuto ranging & HOLD function4 digit plus 6 digit backlit LCD display. High and low resistance alarms256 test ...
DET24C is a clamp-on ground resistance tester that ...
Description:
DET24C is a clamp-on ground resistance tester that set new standards in terms of access, performance, features, simplicity of operation and safety. The units are designed with flat core ends to prevent dirt build-up, ensuring measurement integrity and improved reliability ...
All instruments meet IEC1010, HD384 and BSEN61557, and ...
Description:
All instruments meet IEC1010, HD384 and BSEN61557, and are sealed to IP54 for weatherproof performance.Easy to hold and comfortable to use, the large display provides the unique combination of two digital readouts and an analogue arc.All primary results are displayed ...