Socket Testers

A socket tester is a small, hand held device that is plugged into a socket to quickly confirm that an AC wall outlet is working and can provide the power that is needed to power the devise that will be plugged into it.


Socket testers are used to ensure that the wiring is the correct way round. It will detect when there is no earth but will not check if the earth is in good condition if it is there.


The lights on the front of the mains outlet tester will light up in different combinations, this will indicate if there is any type of fault.


There are different types of socket testers:

Simple testers can detect a number of different faults but they cannot indicate or measure effective the earth fault loop impedance. They are normally the same size as a 13A plug.


Advanced testers have the same normal functions that a simple tester has including reversed line and earth, or reversed line and neutral. They display the range of numerical values that the earth fault loop impedance falls.


Professional testers have the same normal functions that a simple tester has including displaying numerical value of earth loop impedance. They also be used to measure the values of earth loop impedance to certify or report on the installation that has been carried out.


Who would use a socket tester?


Electricians, maintenance personnel, DIY enthusiasts, handymen and equipment installers would general have a mains socket tester in their toolbox to check the safety of the socket and prevent shocks and accidents occurring.


...
Read more Read less

Filters

Viewing 1 - 7 of 7 products
Results per page
Description Price Current Rating Voltage Number of Pins Display Type Safety Category Dimensions Weight Height Length Maximum Operating Temperature Minimum Operating Temperature Model Number p Plug Type Safety Category Level
RS Stock No. 776-2008
Mfr. Part No.MARPC104/32
BrandMartindale
$163.05
Each
units
32A - 4 Front Panel CAT III 300 V 131 x 94 x 54mm 292g 54mm 131mm - - PC104/32 - CAT III
RS Stock No. 776-1995
Mfr. Part No.MARPC104/16
BrandMartindale
$151.01
Each
units
16A - 4 Front Panel CAT III 300 V 131 x 94 x 54mm 292g 54mm 131mm - - PC104/16 - CAT III
RS Stock No. 776-2017
Mfr. Part No.MARPC105/63
BrandMartindale
$289.11
Each
units
63A - 5 Front Panel CAT III 300 V 131 x 94 x 54mm 292g 54mm 131mm - - PC105/63 - CAT III
RS Stock No. 719-0905
Mfr. Part No.RSEZ650
BrandMartindale
$195.75
Each
units
13A 230V ac 3 LED CAT II 300 V 315 x 260 x 85mm 1kg 85mm 315mm +40°C -10°C EZ650 Type G - British 3-pin CAT II
RS Stock No. 776-2005
Mfr. Part No.MARPC105/16
BrandMartindale
$160.69
Each
units
16A - 5 Front Panel CAT III 300 V 131 x 94 x 54mm 292g 54mm 131mm - - PC105/16 - CAT III
RS Stock No. 776-2001
Mfr. Part No.MARPC104/63
BrandMartindale
$265.23
Each
units
63A - 4 Front Panel CAT III 300 V 131 x 94 x 54mm 292g 54mm 131mm - - PC104/63 - CAT III
RS Stock No. 776-2014
Mfr. Part No.MARPC105/32
BrandMartindale
$229.98
Each
units
32A - 5 Front Panel CAT III 300 V 131 x 94 x 54mm 292g 54mm 131mm - - PC105/32 - CAT III
Related Products
TEK 402/404 are compact, versatile, battery powered instruments ...
Description:
TEK 402/404 are compact, versatile, battery powered instruments suitable for use in noisy environments. The tough construction makes it ideal for industrial and commercial environments including low voltage signalling, process control and training or educational applications. The loud 85 dB ...
TEK 402/404 are compact, versatile, battery powered instruments ...
Description:
TEK 402/404 are compact, versatile, battery powered instruments suitable for use in noisy environments. The tough construction makes it ideal for industrial and commercial environments including low voltage signalling, process control and training or educational applications. The loud 85 dB ...
An essential testing accessory to facilitate fast and ...
Description:
An essential testing accessory to facilitate fast and safe testing for loop impedance, and R1 & R2 testing of lighting circuits. Reduces the need to hold test probes in place. Positive connection of test leads to lamp holdersEN61010-1 CAT II ...
Volt Stick is a pen style non-contact voltage ...
Description:
Volt Stick is a pen style non-contact voltage detector from our high quality RS PRO brand. Able to safely check the presence of an AC voltage within cables, wall sockets and fuses junction boxes, conveniently no current flow is needed ...