Multimeter Test Leads

Multimeter test leads are considered to be an integral part of electrical measurement, for example connecting your digital multimeter to the unit under test. If the test leads are in poor condition this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised.

A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be in good condition with the proper markings and ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

There are test lead sets designed to meet the requirements of nearly all applications.

Checks before you start:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

  • ...
    Read more Read less

    Filters

    Viewing 41 - 60 of 158 products
    Results per page
    Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
    RS Stock No. 449-9892
    Mfr. Part No.TL222
    BrandFluke
    $61.60
    Each
    units
    Silicone Test Lead Set - Banana Plug - 1.5m 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 468-7358
    Mfr. Part No.L215
    BrandFluke
    $190.30
    Each
    units
    SureGrip Kit with Probe Light & Extender - - - - - - - - - -
    RS Stock No. 493-3257
    Mfr. Part No.TP81
    BrandFluke
    $111.10
    1 Set
    Set(s)
    Insulation Piercing Clip Set - Banana Jack - - - - - - - -
    RS Stock No. 493-3285
    Mfr. Part No.TP88
    BrandFluke
    $33.00
    1 Set
    Set(s)
    Rigid Back Probe Pin Set - 2 mm - 2in - 60V dc - - - -
    RS Stock No. 493-3308
    Mfr. Part No.TLK282
    BrandFluke
    $353.10
    1 Kit
    Kit(s)
    Automotive Test Lead Kit - Crocodile Clip, Hook Clip, Piercing Clip - - - - - - - -
    RS Stock No. 426-837
    Mfr. Part No.FLUKE TP1
    BrandFluke
    $39.60
    Each
    units
    Test Probe Kit - Flat Blade - - 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 449-9870
    Mfr. Part No.TL221
    BrandFluke
    $60.50
    Each
    units
    Extension Lead Set - Female Coupler, Straight - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 705-1285
    Mfr. Part No.TP175E
    BrandFluke
    $49.50
    Each
    units
    Test Probe - Lantern - - 10A 1000V CAT II, CAT II 1000 V, CAT III 1000 V -20°C +55°C CAT II, CAT III
    RS Stock No. 428-495
    Mfr. Part No.FLUKE TL238
    BrandFluke
    $162.80
    Each
    units
    Test Lead Kit - Right Angle, Straight - - 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 501-304
    Mfr. Part No.U1161A
    $93.62
    Each
    units
    Test Lead Extension Kit - 4 mm Banana Plug, Crocodile Clip - - 15A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 436-866
    Mfr. Part No.TLK289
    BrandFluke
    $308.00
    Each
    units
    Industrial Test Lead Kit - Crocodile Clip, Hook Clip, Shrouded 4 mm - - - - - - - -
    RS Stock No. 661-2741
    Mfr. Part No.U1164A
    $20.84
    Each
    units
    Fine Tip Test Probe - - - - 3A 300V CAT II 300 V - - CAT II
    RS Stock No. 442-8294
    Mfr. Part No.80K-40
    BrandFluke
    $435.60
    Each
    units
    High Voltage Probe - Banana Plug - - 20µA 40000V CAT I 40000 V - - CAT I
    RS Stock No. 692-7147
    Mfr. Part No.11059A
    $312.18
    Each
    units
    Kelvin Probe Set - Banana Plug - 800mm - - - - - -
    RS Stock No. 493-3314
    Mfr. Part No.TLK281
    BrandFluke
    $278.61
    1 Kit
    Kit(s)
    Automotive Test Lead Kit - Crocodile Clip, Piercing Clip - - - - - - - -
    RS Stock No. 426-859
    Mfr. Part No.FLUKE TP40
    BrandFluke
    $88.80
    Each
    units
    Automotive Back Probe Pins - Banana Jack - - - - - - - -
    RS Stock No. 705-1945
    Mfr. Part No.Fluke i2500-10
    BrandFluke
    $270.60
    Each
    units
    Flexible Current Probe - - - 1.8m 2.5kA 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 426-843
    Mfr. Part No.FLUKE TP2
    BrandNEUTRAL
    $39.60
    Each
    units
    Test Probe Kit - - - - 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 517-4689
    Mfr. Part No.TLK291
    BrandFluke
    $206.80
    Each
    units
    Test Probe Kit - Plug Yes - 500mA 1000V CAT III 1000 V 0°C +40°C CAT III
    RS Stock No. 122-9727
    Mfr. Part No.66.9008-150-21+66.9008-150-22
    BrandStaubli
    $43.44
    Each
    units
    Test Probe Kit - Straight to Right Angle - 1.5m 20A 1000V CAT II 1000 V - +350°C CAT II
    Related Products
    Designed as a compact, rugged and high performing ...
    Description:
    Designed as a compact, rugged and high performing digital multimeter. This handheld device can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has a large LCD display where the measurement readouts can be viewed ...
    A miniature test lead set comprising leads, probes, ...
    Description:
    A miniature test lead set comprising leads, probes, clips and adaptors to give quick and easy access to circuitry. Supplied in a convenient zipped PVC bag. Maximum working voltage: 30V a.c./60V d.c.
    Test lead kit ideal for designing and checking ...
    Description:
    Test lead kit ideal for designing and checking electronic circuits.Precision electronic probes supplied with several crimped spring-loaded probe tips for maximum contact with SMD circuit test points.Test leads with micro-wire grips for fine SMD test.Mini crocodile clips, wire grips and ...
    Set of accessories made up of probes offering ...
    Description:
    Set of accessories made up of probes offering both more comfortable use and complete safety for operators.These probes are fully compatible with all 4 mm diameter safety terminals.The visible metal part is limited to 19mm to prevent any risk of ...