RF Switches

An RF switch is also known as a microwave switch and is a device used to route high frequency signals through transmission paths. RF switches (radio frequency) are used extensively in microwave test systems for signal routing between instruments.
Incorporating a switch into a switch matrix system enables you to route signals from multiple instruments to single or multiple DUTs (devices under test). Multiple tests can be performed with the same setup, eliminating the need for frequent connects and disconnects. An RF switch allows for the entire testing process to be automated, increasing the throughput in high-volume production environments.
RF Switch Configurations
• Single pole, double throw (SPDT)
• Multiport switches or single port, multiple throw (SPnT)
• Transfer switches or double pole, double throw (DPDT)
• Bypass switches
Applications
RF switches can be used to route one input to two output paths, allow a single input to three or more output paths or remove a test component from a signal path.

...
Read more Read less

Filters

Viewing 1 - 3 of 3 products
Results per page
Description Price Switch Configuration Switching Speed Port to Port Isolation Maximum Insertion Loss Connector Type Output Impedance Dimensions Weight Height Length Maximum Frequency Maximum Operating Temperature Minimum Frequency Minimum Operating Temperature
RS Stock No. 477-4626
Mfr. Part No.CX-SW2PL
BrandDiamond
$74.31
Each
units
- - 60dB 0.1dB SO-239 - - - - - 1GHz - DC -
RS Stock No. 477-4632
Mfr. Part No.CX-SW2N
BrandDiamond
$200.43
Each
units
- - 50dB 0.1dB Type-N Female - - - - - 3GHz - DC -
RS Stock No. 885-8517
Mfr. Part No.CCR-33S1O
BrandTeledyne
$216.72
Each
units
SPDT 20ms 60dB 0.5dB SMB Female 50Ω 38.1 x 13.21 x 46.23mm 46.8g 46.23mm 38.1mm 18GHz 65°C 0 GHz -40°C
Related Products
The Cherry Energy Harvesting Generator turns mechanical vibration ...
Description:
The Cherry Energy Harvesting Generator turns mechanical vibration into electrical energy. When actuated, a mechanical force acts vertically on the end of the generator’s lever. A patented mechanism then converts the mechanical energy generated into electrical energy in the form ...
Steute RF GF wireless foot switch features sWave ...
Description:
Steute RF GF wireless foot switch features sWave 2.4 GHz wireless technology. The sWave wireless protocol offers a reliable, manageable and practicable wireless technology developed especially for safety-related industrial applications. The RF GF foot switch has an aluminium diecast enclosure ...
Programmable thermostat and radio frequency control device, which ...
Description:
Programmable thermostat and radio frequency control device, which communicates with a mains-powered wall mounted receiver which switches the heat source. The RF transmitter is battery powered, and is intended to be fitted wherever a conventional room thermostat would normally be ...
Programmable Wireless Room Thermostat, pre-wired for easy connection. ...
Description:
Programmable Wireless Room Thermostat, pre-wired for easy connection. Will replace most common residential thermostats and is designed to be used with electric, gas, oil heating or cooling system. This thermostat is separating its functions into two units, the receiver and ...