Screw Extractors

A screw extractor is a tool for removing broken, damaged or seized screws. They can be driven manually using adjustable spanners or vice grip pliers or by using a hand-held power tool.


Why use a Screw Extractor?


Screws can break, rust or become stripped and need to be replaced. This brings any work or project to a halt. The easiest way to remove the screws before replacing with a new one, is to use a specialist tool such as a screw extractor. The screw extractors are similar to a screw but have a reverse thread.


How to remove a screw using a screw extractor


Always select a drill bit that is slightly smaller than the screw you want to remove.

Attach to the drill

Line the drill bit up with the centre of the screw

Work slowly to drill a hole for the extractor

Place the spiral end of the extractor into the hole you have drilled.

Twist the extractor anti clockwise until you cannot turn it anymore

Twist the extractor with a wrench or drill. Grip the top of the screw extractor with a wrench. Twist it anti clockwise until the screw comes free.

If using a drill, attach the free end of the extractor to the drill, set to rotate in reverse and turn it on to turn the screw anti clockwise

Remove the screw using pliers


...
Read more Read less

Filters

Viewing 1 - 10 of 10 products
Results per page
Description Price Number of Pieces Set Contents Material Case Material
RS Stock No. 282-855
Mfr. Part No.9500B
$355.92
Each
units
10 1/8; 3/16; 7/32; 5/16; 3/8; 7/16; 17/32; 5/8; 3/4; 1 in Carbon Steel -
RS Stock No. 264-2230
Mfr. Part No.9500A
BrandStanley
$89.38
Each
units
5 1/8; 3/16; 7/32; 5/16; 3/8 in Alloy Steel -
RS Stock No. 446-853
BrandRS PRO
$36.29
1 Set of 1
Set(s)
5 2.5; 3.3; 4.2; 5; 6.8 mm Alloy Steel Plastic
RS Stock No. 710-0630
BrandRS PRO
$15.68
Each
units
3 No 1; No 2; No 3 Steel -
RS Stock No. 282-833
Mfr. Part No.69X00
$195.54
Each
units
10 7 mm to 1/4 to 9/32 in; 3 to 3/4 in; 1 5/16 in; 7 in; 0.86 8 mm to 5/16 in; 9 mm to 11/32 in; 3/8 in; 10 mm; 11 mm to 7/16 in; 12 mm; 13 mm to 1/2 in; 14 mm to 9/16 in; 15 mm to 16 mm to 5/8 in - -
RS Stock No. 446-863
BrandRS PRO
$112.88
1 Box of 1
Box(es)
12 HSS Fully Ground Jobber Drills (x6); 2.5; 3.3; 4.2; 5; 6.8 mm HSS Plastic
RS Stock No. 423-6685
BrandRS PRO
$27.86
1 Set
Set(s)
5 1/4; 5/16; 3/8; 7/16; 1/2 in Steel -
RS Stock No. 460-9516
BrandRS PRO
$20.41
Each
units
5 No 1; No 2; No 3; No 4; No 5 Chrome Vanadium Steel Plastic
RS Stock No. 492-311
Mfr. Part No.422003
BrandCK
$32.25
Each
units
2 6 → 10; 12 → 14 mm HSS -
RS Stock No. 769-1779
Mfr. Part No.285.J10PB
BrandFacom
$376.26
Each
units
11 - - Plastic
Related Products
RS Pro Impact Phillips screw bits are designed ...
Description:
RS Pro Impact Phillips screw bits are designed for use with conventional impact drivers. With a Torsion style round shank to withstand exceptional torque peak loads, these bits are hard wearing and give a long service life. Supplied in a ...
32-piece set comprising 4 individual bit sets in ...
Description:
32-piece set comprising 4 individual bit sets in storage clips, and a magnetic adaptor. Features & Benefits• Manufactured from high grade alloy steel• Suitable for use with power tools.
Bit collection of 25 mm bits with torsion ...
Description:
Bit collection of 25 mm bits with torsion zone, for use with stainless steel screwsPrevents extraneous rust at screw connectionsMade from stainless steel, vacuum-ice-hardened using a special processMust be stored separately from non-stainless tools.
Our RS Pro 10 Piece Insulated Screwdriver Set ...
Description:
Our RS Pro 10 Piece Insulated Screwdriver Set has been designed and manufactured with durable chrome-molybdenum vanadium steel. The generous sized, easy grip handles are soft to touch and are made up of anti-slip thermoplastic rubber (TPR). Our screwdriver kit ...