LCBSBM-9-01A2-RT, 14.3mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
- RS Stock No.:
- 721-4726
- Mfr. Part No.:
- LCBSBM-9-01A2-RT
- Brand:
- Essentra
360 in Global stock for delivery within 1 working day (+3 days for regional areas).
840 in Global stock for delivery within 7 working day (+3 days for regional areas).
Added
Price (ex. GST) Each (In a Pack of 40)
$0.611
(exc. GST)
$0.703
(inc. GST)
| Units | Per unit | Per Pack* |
| 40 - 360 | $0.611 | $24.44 |
| 400 - 760 | $0.605 | $24.20 |
| 800 - 1960 | $0.594 | $23.76 |
| 2000 + | $0.577 | $23.08 |
| *price indicative | ||
- RS Stock No.:
- 721-4726
- Mfr. Part No.:
- LCBSBM-9-01A2-RT
- Brand:
- Essentra
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Miniature Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm
Specifications
Attribute | Value |
|---|---|
| PCB Support Type | Adhesive-Backed Support |
| Overall Height | 23mm |
| Body Height | 14.3mm |
| Support Base Dimensions | 12.7 x 12.7mm |
| PCB Hole Diameter | 3.18mm |
| PCB Thickness | 1.57mm |
| Material | Nylon |
| Support Base Length | 12.7mm |
| Support Base Width | 12.7mm |