Arduino MKR ZERO (I2S Bus & SD for Sound, Music & Digital Audio Data)
- RS Stock No.:
- 169-7584
- Mfr. Part No.:
- ABX00012
- Brand:
- Arduino
22 in New Zealand stock for next working day delivery (up to 3 days in regional areas).
71 in Global stock for delivery within 1 working day (+3 days for regional areas).
Added
Price (ex. GST) Each
$49.18
(exc. GST)
$56.56
(inc. GST)
| Units | Per unit |
| 1 - 9 | $49.18 |
| 10 - 24 | $48.16 |
| 25 - 99 | $47.22 |
| 100 + | $44.86 |
- RS Stock No.:
- 169-7584
- Mfr. Part No.:
- ABX00012
- Brand:
- Arduino
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- IT
Product Details
Arduino MKR ZERO
Arduino MKR ZERO is a popular educational development board which contains the ATMEL SAMD21 microcontroller. It is made to integrate the core's low power consumption and high performance. Learn about 32-bit application development. It allows you to play with music files and no additional hardware is required.
What can you find on Arduino MKR ZERO board?
• Onboard SD connector with SPI interface
• Additional I2C Port - which apart from SDA and SCL signals includes the GND and +5V power rails
• Onboard LED - connected to a dedicated pin (32)
• Vin pin - used to power the board with regulated 5V source
• 5V - it outputs from the board when powered from the USB connector or from the VIN pin of the board
• VCC pin - outputs 3.3V through on-board regulator
• LED ON - connected to the 5V input from either USB or VIN
• Charge LED - driven by the charger chip that monitors the current drawn by the Li-Po battery while charging
Features and Benefits
• 5V board power supply
• Li-Po single cell, 3.7V, 700mAh minimum battery
• DC Current for 3.3V/5V - 600 mA
• Circuit operating voltage of 3.3V - unlike any other Arduino board, this runs at 3.3V, therefore any higher voltage than that will damage the board
• 22 digital pins
• Flash memory of 256 KB and 8 KB for bootloader
• 32 KB SRAM
• Full speed USB device and embedded Host
Arduino MKR ZERO is a popular educational development board which contains the ATMEL SAMD21 microcontroller. It is made to integrate the core's low power consumption and high performance. Learn about 32-bit application development. It allows you to play with music files and no additional hardware is required.
What can you find on Arduino MKR ZERO board?
• Onboard SD connector with SPI interface
• Additional I2C Port - which apart from SDA and SCL signals includes the GND and +5V power rails
• Onboard LED - connected to a dedicated pin (32)
• Vin pin - used to power the board with regulated 5V source
• 5V - it outputs from the board when powered from the USB connector or from the VIN pin of the board
• VCC pin - outputs 3.3V through on-board regulator
• LED ON - connected to the 5V input from either USB or VIN
• Charge LED - driven by the charger chip that monitors the current drawn by the Li-Po battery while charging
Features and Benefits
• 5V board power supply
• Li-Po single cell, 3.7V, 700mAh minimum battery
• DC Current for 3.3V/5V - 600 mA
• Circuit operating voltage of 3.3V - unlike any other Arduino board, this runs at 3.3V, therefore any higher voltage than that will damage the board
• 22 digital pins
• Flash memory of 256 KB and 8 KB for bootloader
• 32 KB SRAM
• Full speed USB device and embedded Host
Specifications
Attribute | Value |
|---|---|
| Product Name | MKR ZERO (I2S Bus & SD for Sound, Music & Digital Audio Data) |
| Kit Classification | Development Board |
| Processor Part Number | ATSAMD21G18A |