64, 96 Way DIN 41612 Eurocard Motherboard FR4 Single Sided 84hp 20.32mm(4HP)

  • RS Stock No. 110-2444
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Microbus with earth plane

This Microbus is designed for use with DIN 41612 64 // 96 or 96 // 96 connectors.
Pins 1 and 32 on rows a and l are for 0 V with full 0 V display panel on one side of the plate. Pins 2 and 31 on rows a and c are for Vdc, which therefore clears 56 separate signalling lines.
The width of the plate is from 42 → 84 E.
The female 64 // 96 and 96 // 96 solder or wrap connectors are ordered separately.
High reliability thanks to the metal holes.
Minimum crosstalk.
DIN 41494 (KM6-II) compatible.
Protective lacquer to prevent solder bridges.

PC / VME Bus Boards

PC Compatible Prototyping Boards

Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.

Microboard Pattern

Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.

Attribute Value
Connection DIN 41612
Number of Contacts 64, 96
Base Material Epoxy Glass Fabric Laminate
Number of Sides 1
Height 128.6mm
Horizontal Pitch 84HP
Thickness 1.6mm
Pitch 20.32mm
Copper Thickness 35µm
On back order for despatch 03/12/2020, delivery within 7 working days from despatch date.
Price (ex. GST) Each
$ 319.08
(exc. GST)
$ 366.94
(inc. GST)
Per unit
1 - 4
5 - 9
10 - 39
40 +
Related Products
Double sided backplanes 3U high with pth for ...
Double sided backplanes 3U high with pth for high reliability which will accept DIN41612 connectors. Suitable for use with subracks to IEC297-3. 96//96-way suitable for high speed logic systems where screening is required between each signal line. Can also be ...
A 64-way single-sided Eurocard backplane suitable for use ...
A 64-way single-sided Eurocard backplane suitable for use with 64//96 (a/c) DIN 41612 indirect edge connectors, in conjunction with Eurocard sub-racks to DIN 41494, e.g. the RS eurocard sub-rack system (except 4HP and 10HP card fronts).,Dimensions: Height 3U. Width 84HP. ...
This series of nut plates is designed to ...
This series of nut plates is designed to give technicians the ability to fine-tune the backplane to the requirements of their system. Each hole is a through-hole and the connector can be wired to series B as OV to prevent ...