TE Connectivity Straight Cable Boot, LFH Polyolefin Adhesive Lined, 43mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Zero Halogen (Lipped) - 202K1 and 222K1 Series

Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting.

Features and benefits

• Low smoke Low emission properties
• Excellent sealing and strain relief
• Dielectric strength: 15MV/m

Note

If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots

Standards

DEF STAN 59/97 issue 3 Type DF

Specifications
Attribute Value
Type Straight Cable Boot
Inside Diameter Primary 43mm
Inside Diameter Secondary 25mm
Adhesive Lined Yes
Material LFH Polyolefin
Number of Breakouts 1
Minimum Operating Temperature -30°C
Maximum Operating Temperature +80°C
Shrunk Diameter Primary 28.2mm
Shrunk Diameter Secondary 9.9mm
On back order for despatch 28/10/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
Was $47.05
$ 38.90
(exc. GST)
$ 44.74
(inc. GST)
units
Per unit
1 - 14
$38.90
15 - 49
$36.78
50 +
$35.26
Packaging Options:
Related Products
Heatshrink connector terminal housing, straight. The inner lip ...
Description:
Heatshrink connector terminal housing, straight. The inner lip guarantees increased strain relief. For use with circular connectors to VG standard. Protects against environmental influences.
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Developed to meet the increased requirements for safety ...
Description:
Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop ...
Ensures that cable ends are waterproof and permits ...
Description:
Ensures that cable ends are waterproof and permits long term storage without risk of moisture penetration. It is a medium wall moulded cap internally coated with an adhesive sealant.,Installation is simple, the cap is centred over the end of the ...