Linear Technology LTC2875IS8#PBF, CAN Transceiver 4 (Minimum)Mbit/s 2-Channel CAN, 8-Pin SOIC

  • RS Stock No. 151-3299
  • Mfr. Part No. LTC2875IS8#PBF
  • Manufacturer Analog Devices
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The LTC®2875 is a robust high speed, low power CAN transceiver operating on 3.3V or 5V supplies that features ±60V overvoltage fault protection on the data transmission lines during all modes of operation, including power-down. The maximum data rate has been extended to 4Mbps to support high speed protocols based on the CAN physical layer. Enhanced ESD protection allows these parts to withstand ±25kV HBM on the transceiver interface pins without latchup or damage.

Protected from Overvoltage Line Faults to ±60V High Speed Operation Up to 4Mbps ±25kV ESD Interface Pins, ±8kV All Other Pins Extended Common Mode Range (±36V) Ideal Passive behaviour to CAN Bus with Supply Off Current Limited Drivers and Thermal Shutdown Power-Up/Down Glitch-Free Driver Outputs Micropower Shutdown Mode Transmit Data (TXD) Dominant Timeout Function ISO 11898-2 Compliant DeviceNet Compatible Up to MP-Grade Available (–55°C to 125°C)

Specifications
Attribute Value
Maximum Data Rate 4 (Minimum)Mbit/s
Number of Transceivers 2
Standard Supported CAN
Power Down Mode Shutdown
Maximum Supply Current 3 (Recessive) mA, 15 (Shutdown Mode) µA, 60 (Dominant) mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 5.004 x 3.988 x 1.498mm
Length 5.004mm
Width 3.988mm
Height 1.498mm
Maximum Operating Supply Voltage 3.6 V, 5.5 V
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 3 V, 4.5 V
286 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 2)
$ 6.96
(exc. GST)
$ 8.00
(inc. GST)
units
Per unit
Per Pack*
2 - 8
$6.96
$13.92
10 - 18
$5.70
$11.40
20 - 48
$4.48
$8.96
50 +
$4.235
$8.47
*price indicative
Packaging Options:
Related Products
WIZnet's range of Embedded Ethernet controller Chips, which ...
Description:
WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:. RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect ...
The LAN9252 device from Microchip is a 2/3 ...
Description:
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over ...
WIZnet's range of Embedded Ethernet controller Chips, which ...
Description:
WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:. RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect ...
The LAN9303 from Microchip is a 3-port 10/100 ...
Description:
The LAN9303 from Microchip is a 3-port 10/100 managed Ethernet Switch in a small footprint QFN package, featuring a MII/RMII/Turbo MII interface that allows network speeds of up to 200Mbps. Full-featured 3-port Switches with per-port IEEE 802.1Q VLAN support (up ...