Fluke 771 Clampmeter, 100mA dc

  • RS Stock No. 287-642
  • Mfr. Part No. FLUKE 771
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

Fluke 771 mA Process Clamp Meter

Need more hours in your day? Save time by not breaking the loop on 4-20 mA signal measurements with the Fluke 771 Process Clamp Meter.

Are you spending time:

•Taking mA measurements by removing a wire and breaking the loop
•Calling the control room to isolate a loop
•Testing analog input/output on a console
•Troubleshooting devices with mA inputs and outputs
•Repairing intermittent or erratic 4-20 mA loops
•Going back to the shop to get extra tools

If you need more time in your busy day take a good look at the Fluke 771 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Here are some specific ways the Fluke 771 clamp meters will help you:

Measure mA signals for PLC and control system analog I/O without breaking the loop
• Measures low level dc current
• Correlate process indication with real physical value

Measure output signals from transmitters without breaking the loop
• Maintain and troubleshoot process and automation equipment without breaking the loop
• No disruption to the process

Detachable clamp with extension cable
• Measurements in tight locations
• Enables measurements in difficult situations

Measurement Spotlight
• Illuminates hard to see wires in dark enclosures
• Measurement process is easier and quicker

Measure up to 99.9 mA range non-contact
• Wide range of measurements
• Measures 10 to 50 mA signals in older control systems

Automatic power off
• After 15 minutes and 2 minute automatic off for backlight and spotlight
• Saves battery life

Features

• Best in class 0.2% accuracy
• 0.01 mA resolution and sensitivity
• Measure 4 to 20 mA signals without “breaking the loop”
• Measure mA signals for PLC and control system analog I/O
• Dual backlit display with both mA measurement and percent of 4 to 20 mA span
• Measurement Spotlight illuminates hard to see wires in dark enclosures
• Detachable clamp with extension cable for measurements in tight locations
• Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
• Automatically change the 4 to 20 mA output for remote testing
• Power saving features, auto-off, backlight timeout extend battery life
• Hold function captures and displays changing measurements

Supplied with

2 AA batteries, soft carry case and user manual.

Specifications
Attribute Value
Absolute Maximum AC Current Measurement -, - A ac
Absolute Maximum DC Current Measurement 99.9mA dc
Model Number 771
DC Current Measurement Resolution 10uA
Best DC Current Accuracy ±1% + 5 Digits
Clamp Meter Type Milliamp Process Clamp
Width 59mm
Battery Type AA
Length 212mm
Display Type LCD
Power Source Battery
Jaw Capacity Busbars 4.5mm
Dimensions 212 x 59 x 38mm
Minimum Operating Temperature -10°C
Weight 260g
Height 38mm
Maximum Operating Temperature +50°C
Battery Life 20 h
Maximum Conductor Size 4.5mm
9 In stock for delivery within 1 working day(s)
Price (ex. GST) Each
$ 1,127.50
(exc. GST)
$ 1,296.62
(inc. GST)
units
Per unit
1 +
$1,127.50
Related Products
The Fluke 345 measures a wide range of ...
Description:
The Fluke 345 measures a wide range of electrical parameters for troubleshooting power disturbances in single- and three phase electrical loads. With a bright colour display to see waveforms and trends, a low-pass filter to remove high frequency noise, and ...
Featuring current clamp, multimeter and thermometer functions, RS ...
Description:
Featuring current clamp, multimeter and thermometer functions, RS Pro ICM134 is ideally suited to HVAC and electrical maintenance applications up to 600 A ac. 4000 Count large backlit LCD display750 V ac / 1000 dc voltage measurement600 A ac current ...
The FLIR high-quality voltage, continuity and current testers ...
Description:
The FLIR high-quality voltage, continuity and current testers have 200A/1000V measuring range. This electrical tester is ideal for electricians who troubleshoot and verify electrical system. They feature an optimized, open-jaw design that can fit into tight spaces and reliably measure ...
Standard: IEC 1010-1 Cat. III, deg. 2. Hall ...
Description:
Standard: IEC 1010-1 Cat. III, deg. 2. Hall effect current probes allowing measurement of direct or alternating currents, without disturbing or breaking the circuit.Multimeter (PAC 20 and 21) or oscilloscope (PAC 22) output.Voltage output.Zero adjustment by means of a thumb ...