RS PRO IPM245F Clamp Meter, Max Current 1kA ac, 1kA dc CAT III 1000 V, CAT IV 600 V

  • RS Stock No. 124-1963
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

RS Pro IPM245F Power Clampmeter

RS Pro IPM245F Power clamp meter 1000 A AC-DC with high performance. Ideal to extend the AC current measuring range of ISO-TECH and RS PRO clamp meters.

10000 Count digital display
Active Backlit, Large-scale display
VoltSense (None Contact Voltage)
Analogue Bar graph
True RMS reading on AC and AC+DC mode
Torch lightening when clamping
Auto AC-DC 1000 Amps capability and selection
AC Current via Flexible Current Probe
Auto AC-DC 1000 V capability and selection
Auto Ohms/Continuity/Diode selection
100 K Ω Resistance capability
Continuity Beeper
Frequency Counter
Power and Power factor measurement
Total Harmonics distortion and Harmonics 1 to 25
Capacitance capability
°C / °F Temperature Function
Inrush Current
DCA Auto-Zeroing Key
Peak Hold
MIN/MAX HOLD
Smart Data Hold
Phase rotation indication
Low pass Filter
Auto Power Off

Standards

IEC 61010-1: CAT IV 600 V, CAT III 1000 V

Supplied with

Clamp meter, battery (installed), carrying case, temperature Probe and instruction manual

Specifications
Attribute Value
Absolute Maximum AC Current Measurement 1kA ac
Absolute Maximum DC Current Measurement 1kA dc
Absolute Maximum AC Voltage Measurement 1000V ac
Absolute Maximum DC Voltage Measurement 1000V dc
Absolute Maximum Resistance Measurement 100kΩ
Model Number IPM245F
AC Current Measurement Resolution 100mA
DC Current Measurement Resolution 100mA
Best DC Current Accuracy ±(1.5% rdg + 5dgts)
Clamp Meter Type Multifunction Clamp
Best AC Current Accuracy ±(1.5% rdg + 5dgts)
Best AC Voltage Accuracy ±(1% rdg + 5dgts)
Best DC Voltage Accuracy ±(0.7% rdg + 2dgts)
Maximum Conductor Size 42mm
Absolute Maximum Temperature Measurement +1000°C
Battery Life 100 h
DC Voltage Measurement Resolution 100mV
Temperature Measurement Resolution 0.1°C
Safety Category Voltage 600 V, 1000 V
Weight 470 (with Battery)g
Jaw Capacity Busbars 27mm
Resistance Measurement Resolution 100mΩ
Dimensions 87.5 x 50.5 x 257mm
Safety Category Level CAT III, CAT IV
Non-Contact Voltage Detector Yes
Width 50.5mm
Best Temperature Measurement Accuracy ±1 % + 1 °C
Battery Type 9 V Alkaline (NEDA 1604 or IEC 6F22)
Maximum Operating Temperature +50°C
Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode, Frequency, Harmonics, Power, Power Factor, Resistance, Temperature, Total Harmonic Distortion
Best Resistance Measurement Accuracy ±1 % + 3 Digits
Height 257mm
Safety Category CAT III 1000 V, CAT IV 600 V
Minimum Operating Temperature 0°C
AC Voltage Measurement Resolution 100mV
True RMS Yes
Length 87.5mm
Display Type Backlit LCD
Power Source Battery
1 : Next working day
34 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 467.23
(exc. GST)
$ 537.31
(inc. GST)
units
Per unit
1 +
$467.23
Related Products
RS Pro ICMA74 high performance clamp meter. 2000 ...
Description:
RS Pro ICMA74 high performance clamp meter. 2000 Count large LCD displayInnovative open jaw technology200 A (ac) measurement capability600 V dc/ac voltage measurement2000 Ω resistance rangeContinuity bleeperDisplay HOLD functionAuto power off4 mm plug in lead set allows replacement or connection ...
Designed to verify the presence of load current, ...
Description:
Designed to verify the presence of load current, voltage and resistence, etc.The small bodies and jaws fit perfectly in your hand and a large backlit display is easy to read.Test lead mA range with high 1 mA resolution for HVAC ...
The FLIR CM46 clamp meter is designed for ...
Description:
The FLIR CM46 clamp meter is designed for commercial and residential electricians. Featuring both AC/DC measurement, the meter is equipped with a bright backlit display for use inside electrical panels. Accu-Tip™ technology delivers amperage measurements on smaller-gauged wires more accurately ...
Standard: IEC 1010-1 Cat. III, deg. 2. Hall ...
Description:
Standard: IEC 1010-1 Cat. III, deg. 2. Hall effect current probes allowing measurement of direct or alternating currents, without disturbing or breaking the circuit.Multimeter (PAC 20 and 21) or oscilloscope (PAC 22) output.Voltage output.Zero adjustment by means of a thumb ...