FLIR CM4X Clamp Meter, Max Current 400A ac CAT III 600V, CAT IV 300V

  • RS Stock No. 179-4695
  • Mfr. Part No. CM44
  • Manufacturer FLIR
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

FLIR True RMS Clamp Meter

The FLIR clamp meter has true RMS meters which are designed to measure AC of maximum 400A. The CM44 is an AC clamp meter with a Type-K thermocouple. It also features Accu-Tip™ technology due to which average measurements on the smaller gauge wire is made easy. This technology also ensures accurate measurements up to a tenth of a digit. The clamp meter has an in-built backlit display which makes it easy to use. The jaw opening of the clamp is maximum up to 30mm. It is used for commercial and residential use.

Features and Benefits

Type K thermocouple Max/Min/Average recording is done by the meter 3-5/6 digits 6000 counts backlight LCD display AC voltage measurement of 600V Maximum resistance measurement of 60kohm Current accuracy is ±2% and voltage accuracy is ±1% Frequency is also measured by the meter Electrical field detection used to verify if voltage exist

Certifications

UL approved CE certified

Specifications
Attribute Value
Absolute Maximum AC Current Measurement 400A ac
Absolute Maximum AC Voltage Measurement 600V ac
Absolute Maximum DC Voltage Measurement 600V dc
Absolute Maximum Resistance Measurement 60kΩ
Model Number CM4X
Clamp Meter Type Multifunction Clamp
Best AC Current Accuracy ±1.8 %
Best AC Voltage Accuracy ±1 %
Best DC Voltage Accuracy ±1 %
Best Resistance Measurement Accuracy ±1 %
Safety Category Voltage 300 V, 600 V
True RMS Yes
Display Type Backlit LCD
Maximum Operating Temperature +50°C
Safety Category CAT III 600V, CAT IV 300V
Best Temperature Measurement Accuracy ±1 %
Absolute Maximum Temperature Measurement +400 °C, +752 °F
Battery Type AAA
Dimensions 217 x 76 x 37mm
Height 37mm
Minimum Operating Temperature -10°C
Power Source Battery
Non-Contact Voltage Detector Yes
Width 76mm
Safety Category Level CAT III, CAT IV
Jaw Capacity Busbars 30mm
Maximum Conductor Size 30mm
Length 217mm
Temporarily out of stock - back order for despatch 04/02/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 251.90
(exc. GST)
$ 289.68
(inc. GST)
units
Per unit
1 +
$251.90
Related Products
Digital AC and DC clamp meter with True-RMS ...
Description:
Digital AC and DC clamp meter with True-RMS reading, Dual hall sensor and a Nickel-Steel alloy jaw mechanism. True-RMS reading4000 Count digital display. Auto-ranging. Dual hall sensor. Nickel-Steel alloy jaw mechanismAC-DC 300 AAC-DC 600 V0.5% basic DC Voltage accuracy1.5% basic ...
Standard: IEC 1010-1, 600 V Cat. III, deg. ...
Description:
Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category. Current probes to measure low DC and AC currents.Easily adapted to all 19 mm standard spacing multimeters.Zero reset using a thumb wheel ...
Fully IEC1010-1 and IEC101-2-032 compliant for circuits up ...
Description:
Fully IEC1010-1 and IEC101-2-032 compliant for circuits up to 500V phase to phase or 300V phase to earth CAT III or 600V CAT II30mA and 300mA ranges for leakage current measurement0.01mA resolution on 30mA range30A and 300A ranges for power ...
4000 count LCD displayAC & DC Current Measurement. ...
Description:
4000 count LCD displayAC & DC Current Measurement. True RMS measurements with auto range. High noise rejection ideal for testing AC power distribution control gear and AC/DC inverter drive systems. High external field rejection. High accuracy over full range. Simple ...