Right Angle 50Ω RF Adapter SMA Plug to SMA Socket 12.4GHz

  • RS Stock No. 878-2362
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

RS 50 Ohm SMA RF Coaxial Adapters

A range of 50 Ohm SMA RF coaxial adapters available with a variety of configurations and mounting options. These 50 Ohm SMA RF coax adapters have gold plated brass bodies (apart from 878-2384 which is passivated stainless steel) and mechanical interface in accordance with MIL-STD-348A.
Stock number 878-2362 is an right angle SMA plug to SMA jack RF coaxial adapter
Stock number 878-2369 is an SMA jack to SMA jack RF coaxial adapter
Stock number 878-2365 is an SMA bulkhead jack to SMA jack RF coaxial adapter suitable for a max panel thickness of 4.5mm
Stock number 878-2375 is an SMA jack to auto probe RF coaxial adapter
Stock number 878-2384 is an SMA bulkhead jack to push-on plug RF coaxial adapter suitable for a max panel thickness of 3.7mm
Stock number 878-2387 is an SMA bulkhead jack to SMA jack RF coaxial adapter suitable for a max panel thickness of 6.7mm
For additional data on these SMA RF coaxial adapters please refer to datasheets on our website.

RS SMA RF Coaxial Connectors

RS SMA connectors are suitable for applications including wi-fi equipment.

Specifications
Attribute Value
Adapter Type SMA Plug to SMA Jack
Adapter Type A SMA
Adapter Type B SMA
Gender A Male
Gender B Female
Impedance 50Ω
Body Orientation Right Angle
Operating Frequency 12.4GHz
Contact Plating Gold
Length 16.5mm
Body Plating Gold
Contact Material Beryllium Copper (Contact II), Brass (Contact I)
36 : Next working day
1194 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 21.64
(exc. GST)
$ 24.89
(inc. GST)
units
Per unit
1 - 49
$21.64
50 - 99
$19.87
100 - 249
$17.39
250 - 499
$15.64
500 +
$15.24
Related Products
U.FL Series. Being one of the smallest SMT ...
Description:
U.FL Series. Being one of the smallest SMT ultra miniature connectors, Hirose U.FL provides a low mated height of 2.5mm whilst occupying only 7.7mm² board space.The U.FL RF connector offers performance from DC to 6 GHz. This make the U.FL ...
The TA271 D9-BNC adaptor lets you use traditional ...
Description:
The TA271 D9-BNC adaptor lets you use traditional differential voltage probes and current probes, and make single-ended measurements with a ground-referenced probe. It is also essential when using the TA325 and TA326 current probes. The adaptor grounds the negative input ...
The Knipex crimp tool is 10 cablecon F-compression ...
Description:
The Knipex crimp tool is 10 cablecon F-compression connector in a blister pack. It has an outer diameter of 7mm and dielectric from 4.7mm diameter. • It is made from Ni. Sn coating which gives excellent protection against environmental influences• ...
General Applications • High-vibration/low-noise, antenna and test & ...
Description:
General Applications • High-vibration/low-noise, antenna and test & measurement Performance Specifications • Operating Frequency: DC to 11 GHz (50 ohms) DC to 2 GHz (75 ohms) • Nominal Impedance: 50 and 75 ohms • VSWR: 1.30 @ 11 GHz (50 ...