FlexLink Beam Angle Bracket, strut profile 44 mm, Groove Size 11mm

  • RS Stock No. 249-0433
  • Mfr. Part No. XLFA 44 B
  • Manufacturer FlexLink
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Angle Brackets XD, XF and XC

Connects beam end to beam side to provide maximum stability and flexibility with minimum beam preparation.

Note

Fixings not included

//media.rs-online.com/t_line/L249042-01.gif
//media.rs-online.com/t_line/LI249042-01.gif
Specifications
Attribute Value
Structural Element Type Beam
Connector Type Angle Bracket
Fits Groove Size 11mm
Thread Size M6
Fits Strut Profile 44 mm
Product Family FlexLink
Material Die Cast Aluminium
Product System XC
5 : Next working day
626 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 14.63
(exc. GST)
$ 16.82
(inc. GST)
units
Per unit
1 +
$14.63
Related Products
Offers high vibration resistance and a neat flush ...
Description:
Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ...
Suitable for simple door functions, The T-slot rotatable ...
Description:
Suitable for simple door functions, The T-slot rotatable location lugs can be removed if the hinge is to be fixed to a flat surface. Hole centres 50mm,Fasteners not included. Each hinge requires:. Qty 2 M6´12 socket screws see stock no. ...
Multi-blocks are a versatile connector for fastening sheet ...
Description:
Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A square nut is included, XC and XF M6, XD M5 for mounting ...
Slot nuts can be inserted directly into the ...
Description:
Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.