FlexLink Beam Mount Plate, strut profile 44 mm, 88 mm, Groove Size 11mm

  • RS Stock No. 331-4065
  • Mfr. Part No. XCFB 44X88 A
  • Manufacturer FlexLink
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Mounting Plate XC, XF and XD

To connect beams end to beam side. The holes in the end of the beam must be deburred and threaded (M5 rolled). Use a countersunk screw to attach the plate to the beam end then secure to the T-slot of the beam side.

Note

Fixings not included

//media.rs-online.com/t_line/L2490405-01.gif
//media.rs-online.com/t_line/LD249040-03.gif
Specifications
Attribute Value
Structural Element Type Beam
Connector Type Mounting Plate
Fits Groove Size 11mm
Thread Size M6
Fits Strut Profile 44 mm, 88 mm
Product Family FlexLink
Material Aluminium
Product System XC
3 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 31.88
(exc. GST)
$ 36.66
(inc. GST)
units
Per unit
1 - 5
$31.88
6 - 24
$30.26
25 +
$29.04
Related Products
Offers high vibration resistance and a neat flush ...
Description:
Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ...
Suitable for simple door functions, The T-slot rotatable ...
Description:
Suitable for simple door functions, The T-slot rotatable location lugs can be removed if the hinge is to be fixed to a flat surface. Hole centres 50mm,Fasteners not included. Each hinge requires:. Qty 2 M6´12 socket screws see stock no. ...
Multi-blocks are a versatile connector for fastening sheet ...
Description:
Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A square nut is included, XC and XF M6, XD M5 for mounting ...
Slot nuts can be inserted directly into the ...
Description:
Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.