Schneider Electric TeSys F LC1F 3 Pole Contactor, 3NO, 150 A, 80 kW

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CZ
Product Details

Schneider Electric | LC1D TeSys D Series | Contactors

Electric motor sizes are increasing, especially in applications such as HVAC+R and large industrial processes. In response, Schneider Electric is extending the TeSys range of block type contactors for AC3 duty. TeSys F Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LC1F series has been designed for integration in control systems and for motor control or resistive load applications. The TeSys F contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits

• North American and International terminal markings • Panel mounted with supplied screws
• Bidirectional peak limiting diode suppressor to protect the coil
• Fully tested, approved, and certified by national and international bodies: IEC, CCC, CSA, UL
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

Applications:

• Industrial control systems

• Switching contractors or relay coils

• Powering control and signalling switches

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.
Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Simplified design, installation and maintenance

Simplified design, installation, and maintenance

The TeSys F series features a flexible design with a wide range of compatible components to support design requirements. A wide range of auxiliaries provide additional contacts where needed and drawer-mounted coils allow easy maintenance and reduce downtime.

Is the TeSys F range a double break pole type contactor?

Yes the TeSys F range uses linear translation movement that provides double breaking of the poles.

Note

For AC supply refer to the LX9 coils and for a DC supply refer to LX4 coils

Schneider Electric LC1F150 Contactor

The LC1F150 model is a coil less 3 pole contactor that offers long mechanical and electrical life and a consistent low-voltage architecture to ensure safe and reliable operation. The LC1F150 offers an AC-3 full load current rating of 150 A.

Specifications
Attribute Value
Number of Poles 3
Contact Current Rating 150 A
Power Rating 80 kW
Range TeSys F
Series LC1F
Normal State Configuration 3NO
Contact Voltage Rating 1 kV ac
Terminal Type Screw
Depth 171mm
Minimum Operating Temperature -5°C
Width 163.5mm
Length 170mm
Maximum Operating Temperature +55°C
4 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 1,778.50
(exc. GST)
$ 2,045.28
(inc. GST)
units
Per unit
1 - 2
$1,778.50
3 - 4
$1,622.89
5 +
$1,447.27
Related Products
Professional range Te. Sys LC1D AC3 reversing contactors. ...
Description:
Professional range Te. Sys LC1D AC3 reversing contactors. Typical application includes resistive loads and motor control. All models are highly reliable and excellent quality. 3 PoleDIN Rail mount. Screw mount terminalsIP20 front face.
Contactors have a switching voltage of 440Vac and ...
Description:
Contactors have a switching voltage of 440Vac and a coil consumption (ac coils 50/60Hz rated) of 4.5VA (Hold in) and 30VA (inrush). Spring terminals with safety stop to prevent damage to the terminals if excessive force is used during wiring. ...
The Schneider Electric LC1D32V7 model is a 3-pole ...
Description:
The Schneider Electric LC1D32V7 model is a 3-pole contactor featuring a utilisation category of AC-1, AC-3 and AC-4. The control circuit voltage is 400 V AC 50/60 Hz with 1 NO + 1 NC auxiliary contact composition. The rated operation ...
Schneider Electrics LC1 contactors combine long mechanical and ...
Description:
Schneider Electrics LC1 contactors combine long mechanical and electrical life to offer a highly reliable contactor. The LC1 contactors offer quick and simple setup while maintaining compliance with international standards. Built-in coil suppression3 N/O poles. Auxiliary contact configuration one N/O, ...