Schneider Electric TeSys K LP4K 3 Pole Contactor, 3NO, 12 A, 5.5 kW, 24 V dc Coil

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Schneider Electric LP4K TeSys K Miniature Contactors

TeSys K Silent Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LP4K range are low consumption DC operated contactors recommended for use in areas sensitive to noise and high interference mains supplies. The TeSys K contactors offer quick simple setup while maintaining compliance with international standards. A special armature structure design allows all devices in the range to have the same physical size and panel footprint for convenience.

Features and Benefits

• Built-in auxiliary contacts for added switching capability • Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Coil with rectifier incorporated
• Easily installed accessories
• Instantaneous auxiliary contact
• Flexible control circuit to suit a wide range of applications
• High-fault short circuit current ratings provide the flexibility to select any component

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.
Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Are the TeSys K contactors suitable for applications in AC4 usage?

The LP4K series is suitable up to a maximum of 440 V ac in category AC4.

Is the TeSys K range a double break pole type contactor?

Yes the TeSys K range uses linear translation movement that provides double breaking of the poles.

Schneider Electric LP4K1210BW3 Miniature Contactor

The LP4K1210BW3 is a miniature 3 pole low consumption contactor featuring a 24 V dc operating coil, an AC-3 full load current of 12 A and a normally open auxiliary contact.

Schneider Electric K Range Special Purpose

Specifications
Attribute Value
Coil Voltage 24 V dc
Number of Poles 3
Contact Current Rating 12 A
Power Rating 5.5 kW
Range TeSys K
Series LP4K
Normal State Configuration 3NO
Contact Voltage Rating 690 V ac
Number Of Auxiliary Contacts 1
Terminal Type Screw
Length 58mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature -25°C
Width 45mm
Depth 57mm
5 : Next working day
20 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 141.59
(exc. GST)
$ 162.83
(inc. GST)
units
Per unit
1 - 2
$141.59
3 - 4
$123.89
5 +
$111.50
Related Products
Professional range Te. Sys LC1D AC3 contactors. Typical ...
Description:
Professional range Te. Sys LC1D AC3 contactors. Typical application includes resistive loads and motor control. All models are highly reliable and excellent quality. 3 PoleDIN Rail mount. Screw mount terminalsIP20 front face.
A range of complete ’ready to use’ devices ...
Description:
A range of complete ’ready to use’ devices that comprise relay and heat sink in one compact DIN rail mountable unit. Typical applications include control of non motor loads where high operating frequencies are encountered. Semiconductor contactors for wear-free, silent ...
B(C)6 — motor rating 4 kWB(C)7 — motor ...
Description:
B(C)6 — motor rating 4 kWB(C)7 — motor rating 5.5 kW4-pin. Switches resistive loads (usage category AC1)Switches cage rotor motors (usage category AC3)For screw or DIN rail assemblies. Overall width of 47.5 mm. Ripple-free.
Three main poles. One N/O auxiliary contact. Front ...
Description:
Three main poles. One N/O auxiliary contact. Front and side mounted auxiliary contact blocks. Location for surge protectionDIN rail and back plate mounting. Manufactured to IEC947-4-1, EN60 047-4-1CE marked.