Dold 3 Pole Contactor, 3NO, 10 A, 24 V dc Coil

  • RS Stock No. 375-3741
  • Mfr. Part No. BF9250.03/001 UH=DC24V 3xAC10A AC24-480V
  • Manufacturer Dold
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MT
Product Details

Semiconductor contactor

Semiconductor contactors for wear-free, silent switching of AC loads such as heating, motors, valves and lighting
The cost of investing in this new technology is quickly recovered where high switching rates are used
Zero-voltage switching to prevent feedback to the main power grid
Integrated temperature monitoring ensures the device is protected from damage caused by excess current
In accordance with EN 60 947-4-2, IEC 60 158-2, VDE 0660 part 109
Single-phase or 3-phase design
Control input X1 with low power consumption, e.g. for PLC control
High switching frequency coupled with long service life
Compact construction with integrated heat sink
For switching AC loads up to 480 V
Protection circuit with varistors
Temperature monitoring via LED display and semiconductor output (memory preservation)
3 LED displays
Top-hat rail mounting

Semiconductor Contactors

A range of complete ’ready to use’ devices that comprise relay and heat sink in one compact DIN rail mountable unit. Typical applications include control of non motor loads where high operating frequencies are encountered.

Specifications
Attribute Value
Coil Voltage 24 V dc
Number of Poles 3
Contact Current Rating 10 A
Normal State Configuration 3NO
Contact Voltage Rating 480 V ac
Maximum Operating Temperature +40°C
Width 45mm
Minimum Operating Temperature 0°C
Depth 120mm
Length 85mm
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 477.68
(exc. GST)
$ 549.33
(inc. GST)
units
Per unit
1 +
$477.68
Related Products
One N/O auxiliary contact. Switching category AC2; AC3Coil ...
Description:
One N/O auxiliary contact. Switching category AC2; AC3Coil nominal power: 3.5VA, 3.5W (closing and holding)Make/break times: 14 to 26//16 to 40ms.
Three main poles. One N/O auxiliary contact. Front ...
Description:
Three main poles. One N/O auxiliary contact. Front and side mounted auxiliary contact blocks. Location for surge protectionDIN rail and back plate mounting. Manufactured to IEC947-4-1, EN60 047-4-1CE marked.
X Start is the latest generation of Contactors, ...
Description:
X Start is the latest generation of Contactors, Overloads and Relays from Moeller, based on the tried and tested DIL series. This generation of modular components benefits from the advances in technology for motor switching and control, which in turn ...
Built-in coil suppression3 N/O poles. Auxiliary contact configuration ...
Description:
Built-in coil suppression3 N/O poles. Auxiliary contact configuration one N/O, one N/COperating time closing 12 to 22 ms. Operating time opening 4 to 19 ms.