Tektronix CT1 Current Probe & Clamp

  • RS Stock No. 499-605
  • Mfr. Part No. CT1
  • Manufacturer Tektronix
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Tektronix Current Probe & Clamp

The Tektronix current probes are created for the permanent or semi-permanent in-circuit installation. Each probe consists of a current transformer and an interconnecting cable. The current transformers have a small hole to pass a current-carrying conductor during circuit assembly.

Features and Benefits

25kHz to 1GHz
Maximum pulse current is 450mA
Maximum CW current is 12A
Sensitivity is 5mV/mA
Accuracy is ±3 %
Probe type is AC only
Solid core high bandwidth
Ultra-low inductance
Very small form factor
Characterize current waveforms up to less than 200 per second rise times
Very low loading of circuit under test
Fits into dense, closely-spaced circuit designs

Applications

Data storage read channel design
Silicon characterization
High-frequency analogue design
ESD testing
Signal injection
Differential current measurements
Single-shot low rep-rate pulse measurements
Propagation delay measurement

Certifications

UL3111-2-032
CSA1010.2.032
EN61010-2-032
IEC61010-2-032

Specifications
Attribute Value
Current 0.45A
Probe Type AC
Minimum Bandwidth 25000Hz
Maximum Bandwidth 1000000kHz
Safety Category CAT I 175 V
Safety Category Level CAT I
Model Number p CT1
Best Accuracy ±3 %
Safety Category Voltage 175V
Bandwidth 25 kHz → 1 GHz
Temporarily out of stock - back order for despatch 13/11/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 1,666.95
(exc. GST)
$ 1,916.99
(inc. GST)
units
Per unit
1 +
$1,666.95
Related Products
The Tektronix ’long nose’ style clamp-on probe uses ...
Description:
The Tektronix ’long nose’ style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. Equipped with a BNC connector, it can be used with a shrouded banana plug adapter*1. It can also be used ...
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10k. Hz bandwidth. Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable. ...
Suitable for use with oscilloscopes, recorders and data ...
Description:
Suitable for use with oscilloscopes, recorders and data loggers a.c. coupled output (no d.c. offset) Voltage output of 3V full scale for each range Fits around conductors up to 160mm diameter Extended battery life and external power supply input Meets ...
Various bandwidths: DC to 50 MHz, 100 k. ...
Description:
Various bandwidths: DC to 50 MHz, 100 k. HzDC and AC measurements. Superior accuracy and high signal to-noise ratio. Low circuit insertion loss. Battery powered with BNC connector or oscilloscope powered Auto. Probe interface.