LeCroy CP030 Current Probe

  • RS Stock No. 801-4858
  • Mfr. Part No. CP030
  • Manufacturer LeCroy
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

Teledyne LeCroy Current Probes

Teledyne LeCroy current probes make accurate and reliable AC, DC and impulse current measurements without requiring the breaking of a circuit or the insertion of a shunt. This capability is based on a combination of Hall effect and transformer technology. Many current probes require external power supplies or amplifiers to display a waveform on the oscilloscope screen. LeCroy current probes are powered through the LeCroy ProBus® connection and require no additional hardware. Along with providing power, the ProBus connection allows the current probe and oscilloscope to communicate, resulting in current waveforms automatically displayed on screen in Amps, and calculated power traces scaled correctly in Watts. This integration also allows for Degauss and Autozero functions to be carried out directly from the oscilloscope with the press of a button. Applications of LeCroy current probes include use in the design and test of switching power supplies, motor drives, electric vehicles and uninterruptible power supplies.

Rise time (typical) <7 ns (CP030) < 3.5 ns (CP031), <35 ns (CP150), < 175 ns (CP500)
Minimum sensitivity 1mA/div (CPO30A & CPO31A), 10 mA/div (CP030 & CP031), 100 mA/div (CP150 & CP500)
AC noise < 2.5 mA (CP030 & CP031), <25 mA (CP150), 25 mA (CP500)
Coupling AC, DC, GND
Cable length 1.5 m (CP030 & CP031), 2m (CP150), 6m (CP500)
Weight 240g (CP030 & CP031), 500g (CP150), 630g (CP500)
Interface ProBus, 1 MΩ only (requires AP-1M for use with 50Ω input only oscilloscopes)
Usage environment indoors
Operating temperature 0 °C to 40 °C
Maximum relative humidity 80%
Maximum altitude 2000m

Note

The CP030 ( 801-4858 ) & CP031 ( 724-0911 ) are compatible with LeCroy X-Stream oscilloscopes running firmware version 4.3.1.1 or greater. Their Minimum Sensitivity is 10mA/div compared with 1mA/div for CPO30A ( 878-7604 ) & CPO31A ( 878-7607 ). The maximum conductor size for these four models is 5mm od. CP150 ( 801-4855 ) & CP500 ( 724-0918 ) have Minimum Sensitivity 100mA/div and maximum conductor size 20mm od. Teledyne LeCroy current probes have a small form factor which makes probing easier on a crowded compact board.

Specifications
Attribute Value
Current 30A
Probe Type AC/DC
Minimum Bandwidth 0Hz
Maximum Bandwidth 50000kHz
Maximum Conductor Size 5mm
Safety Category CAT I 300 V
Series CP
Safety Category Level CAT I
Model Number p 030
Best Accuracy ±1% + 30 A, ±2% + 50 A
Safety Category Voltage 300V
Bandwidth 50MHz
5 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 7,542.15
(exc. GST)
$ 8,673.47
(inc. GST)
units
Per unit
1 +
$7,542.15
Related Products
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10kHz bandwidthErgonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cableMax. conductor size ...
Superior measurement range from 100mA to 3000 Aac2000 ...
Description:
Superior measurement range from 100mA to 3000 Aac2000 Hours continuous battery life (two AA MN1500 LR6 alkaline batteries, not supplied)Low battery and range overload indicationRange selection by robust rotary switchHigh external field rejectionExcellent accuracy over full rangeSmall diameter (10mm) Rogowski ...
The ADA400A Active Differential Preamplifier allows direct oscilloscope ...
Description:
The ADA400A Active Differential Preamplifier allows direct oscilloscope measurements of very low amplitude voltages and signals which are not ground referenced. The high impedance of both inputs eliminates the need to add additional ground points in the DUT, thereby avoiding ...
A pair of BNC Terminated oscilloscope probes, perfect ...
Description:
A pair of BNC Terminated oscilloscope probes, perfect for use with the Analogue Discovery™ in conjunction with the Discovery BNC Adapter. BNC TerminatedSelectable 1X/10X input attenuationContraction hook tip12cm ground clipLocalization sleeve adapts to IC testingInput resistance:1x1MΩ10x10MΩInput capacitance:1x ...