Erem by Weller 135 mm Cutters, Tool Steel

  • RS Stock No. 182-313
  • Mfr. Part No. 2482E
  • Manufacturer Weller Erem
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CH
Product Details

ESD EREM side cutter

Low-force diagonal cutter
Gripping pressure is distributed across the palm to reduce fatigue
Fingers and thumb automatically adopt the optimum position
Soft foam grip, easy to replace, ESD protection

2412 E

Universal diagonal cutters with bevel
Max. Cutting capacity: Cu 1.6 mm
length: 130 mm

2432 E

Universal diagonal cutters with bevel
Perfectly flush cut
Max. Cutting capacity: Cu 1.6 mm
length: 130 mm

2482 E

Ergonomic tip cutter side face, cutting angle 45°
Ideal for working on PCBs, for cutting component connections and wiring
Max. Cutting capacity: Cu 1.2 mm
Length: 135 mm

Weller 2482E Angled Cutters

The 2482E angled tipped cutters from Weller provide precise cuts at a number of angles. The ergonomic handles allow for reduced fatigue in hands when working over long periods. Made from tough and durable tool steel that makes it suitable for working on electronic boards, component connections due to the ESD protection. The 45° cutting angle coupled with a maximum cutting capacity of 1.2 mm for copper wire and 0.6 for medium hardness wire

Features and Benefits

• Protection of electronic components from risks of electrostatic discharge (ESD)

• ESD compliant for safe use on sensitive electronic components

• Spring return system reduces effort and strain

• Angled Narrow Head Cutters

• Overall length: 135mm

• Cuts copper and Nickel wires Ø: 0.1 – 1.2mm

• Weight: 72g

Typical Applications

Cutters are hand tools used to cut through wires and are available in a range of shapes and sizes to suit a variety of tasks and applications. The most common type of cutter head is oval, tapered and angled. The type of cut produced depends on the bevel of the cutter. Semi-flush cutters are more durable and produce a quick cut rough rougher edges, whereas an ultra-flush bevel will produce a much cleaner cut but is susceptible to damage. Cutters are commonly used in applications such as:

• DIY
• Industrial
• Construction
• Electronic Installation

Care and maintenance

Do not force cutters to cut through material that is too hard for them as it can damage the blades by chipping or blunting them. These hand tools can be cleaned with soap and water, especially the blades, to remove dirt which could cause issues with the joints and encourage corrosion.

FAQ's

What material is this cutter suitable with?

This cutter is suitable to cut copper wires 0.1 to 1.2mm.

What is the bevel of this cutter?

The 2482E provides a flush cut at 45°.

Specifications
Attribute Value
Type Electronics Diagonal Cutters
Overall Length 135 mm
Jaw Length 6mm
ESD Safe Yes
Material Tool Steel
Maximum Cutting Capacity 1.2mm
Cutting Capacity Copper Wire 1.2mm
Cutting Capacity Medium Hard Wire 0.6mm
24 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 159.87
(exc. GST)
$ 183.85
(inc. GST)
units
Per unit
1 +
$159.87
Related Products
Mini side cutters made from premium special steel ...
Description:
Mini side cutters made from premium special steel with hard metal cutting inserts. High gloss burnished with anti-reflective polish. With box joint and double-sheeted spring. Ergonomic, non-slip, two-tone EUROline-conductive handguards made from conductive material. With extra conductive layer for working ...
These electronics cutters manufactured from high quality machined ...
Description:
These electronics cutters manufactured from high quality machined tool steel. Cutters have a built-in internal stop and integral return spring to prevent blade overlapping and reduce operator fatigue. All cutters are supplied with soft grip foam rubber grips.
Introducing the professional electrician's scissors from Facom (841A.4). ...
Description:
Introducing the professional electrician's scissors from Facom (841A.4). These high-quality tools offer maximum comfort of use for both left-handed and right-handed operators. Stainless Steel burnished blades with integrated wire cutter ensure clean and precise cutting of different material types including ...
Induction hardened cutting edges designed to stay sharper ...
Description:
Induction hardened cutting edges designed to stay sharper longer for wire cutting. Strong gripper teeth. Slim profile nose reaches into tight areas. Hardened teeth. Red & Yellow handles denotes international color for safety. ProTouch™ grips provide maximum comfort and reduced ...